Nice 🤙🏽 Ha I’m actually torn right now between grabbing a Spheros 3000 or just using a Nasci 3000 for a lightweight saltwater setup. They both have the core protect so it’s interesting especially since the Nasci is lighter, has more bearings, and is cheaper. Great reel.
Very intrested in getting a Stradic trying to decide on the fl and doing the Stella upgrades vs getting the new fm Stella model looking at the 4000 series reels
I do have some Stradic FL Upgrading videos. I would also have to say the Stradic FM reels should be similar if not the same. Hopefully I’ll have a few more videos up soon!
@@WestCoastFloridaFishing thanks for the response. I have ordered the parts and hopefully soon I can give you a success reply. I watched your Stradic upgrade video twice and it is really helpful. I will have it running when I do my upgrade. Thanks again.
Well I did very good getting all the bearings back in and blew it getting that piece with the springs and bearings. I had it on the first try but when I started putting the screws in it kept pushing everything out so when I pulled it out to line up again the brass bushing fell out and that was it. Not your fault just rookie mistake. I didn't know how to line it up right to match the screw holes the first time. Not sure what to do now. Any suggestions?
I got it. I watched a really good video on the clutch roller assembly. Found out the spring was on the wrong side of the bearing. Also learned to keep the aluminum piece on as it keeps the shaft bushing in place. Just pull all of it together. Now that I know all this I have no issues with a complete teardown.
4:42 makes me feel better that yours made the same noise. Thought reel was broken out of box as mine also made a slight rubbing noise when spinning handle
Thank you! The spool support cannot be upgraded unfortunately as there is no pin through system to keep it intact.. you could probably use it but be careful taking off your spool or it can all fall out
This reel does not have the worm oscillation gear. If you see the schematic is has the standard cog gear with the main shaft resting pin so no bushing to upgrade out! Pretty simple on the inside!! Awesome reel for 100$
Nothing like power knob , from its name it controls better than most knobs designe but becarefull little knobs r usually there to tell u that the reel is finese one so be kind with ur cranking under load .
This is a helluva reel for the money. The only thing that comes close is the Daiwa Fuego, which is a great reel but the Nasci just feels better in hand in my opinion.
Great video! Any idea where I can get that stock paddle handle? I just ordered a Nasci3000 but I'm not sure if I'm going to like the stock T handle. Might want to put a stock paddle handle on it instead.
Im having a horrible time with this nasci and the miravel both wind knot problems and the nasci keeps dropping loops of braid down the spool. I close the bail manually both on gloomis rods not sure whats going on
@@WestCoastFloridaFishing 00# grade semi solid grease would be good for fishing reel. I did once reel rated grease but i do find 00# grade works better.
whats your personal opinion, this vs Spheros sw 4000? and what body material in nasci? its like spheros sw (metal stem combine with graphite sideplate) or Full graphite? thanks
@@WestCoastFloridaFishing Sure do. Excited to grab one ASAP. Holds a whopping 100 yards of 4 lb test mono. I think I'm going to fish 3 lb Sunline Sniper on it.
It wouldn’t do horrible and you’re probably better off with the Shimano as the mag seal doesn’t help seal as much as you think it does. I 100% recommended the spheros SW for some saltwater usage. Basically a Stradic for almost half of the cost
I don’t think that’s a bad weight at all for most other aluminum reels in this size at this price range! Definitely not as light as the vanford at 6.3 oz but that’s mostly ci4+ so it makes sense..
@@artificialslinger9730 Yeah you can find the Caldia for $110 but its list price is double that. Soon we'll be able to find Nascis for like 70 probably lol. The Caldia is also a carbon-bodied reel.
@@artificialslinger9730 Just the opposite hear in the Ozark area. Mag sealed is Not considered a gimmick by the reel experts I know. As far as flex I don’t have any issues, and I can sent u pics of 2 Browns caught this year 1 ten pounds and 1 over 13 caught above the Rim Shoals launch on the White River - no flex. Also my brother just caught 19 pound Striper on Beaver lake with one of my old Cauldias and a 30 year old Loomis rod.
Thanks for doing this, My son who is disabled needs a larger handle. I think this just about covers everything I need for him.
That’s awesome! I am glad I was able to help you!
Very instructional. Clear and to the point with every step demonstrated. great tutorial!
Thanks dude! I appreciate your support and comment!!
Nice 🤙🏽 Ha I’m actually torn right now between grabbing a Spheros 3000 or just using a Nasci 3000 for a lightweight saltwater setup. They both have the core protect so it’s interesting especially since the Nasci is lighter, has more bearings, and is cheaper. Great reel.
Awesome video!! And I love the rain too!
Thank you for your support 😊 😁!
Glad you're back in the game
Me too!! Thanks doc!
Very intrested in getting a Stradic trying to decide on the fl and doing the Stella upgrades vs getting the new fm Stella model looking at the 4000 series reels
Hi , I don’t like the knob shimano Stradic 5000 fl , I like more 4000 knob , do u could u advise can change it . Thank you
Glad to see you back at it. That 5000 handle on a 2500 reel looks so huge 😂
I know right!!! It felt pretty good on it though!
What about nasci 2021 full upgrade
Do you still do reel upgrade videos? I have a new Stradic C3000xg and was wondering if your last Stradic upgrade uses the same bearings
I do have some Stradic FL Upgrading videos. I would also have to say the Stradic FM reels should be similar if not the same. Hopefully I’ll have a few more videos up soon!
@@WestCoastFloridaFishing thanks for the response. I have ordered the parts and hopefully soon I can give you a success reply. I watched your Stradic upgrade video twice and it is really helpful. I will have it running when I do my upgrade. Thanks again.
Well I did very good getting all the bearings back in and blew it getting that piece with the springs and bearings. I had it on the first try but when I started putting the screws in it kept pushing everything out so when I pulled it out to line up again the brass bushing fell out and that was it. Not your fault just rookie mistake. I didn't know how to line it up right to match the screw holes the first time. Not sure what to do now. Any suggestions?
I got it. I watched a really good video on the clutch roller assembly. Found out the spring was on the wrong side of the bearing. Also learned to keep the aluminum piece on as it keeps the shaft bushing in place. Just pull all of it together. Now that I know all this I have no issues with a complete teardown.
Babe wake up, West Coast Florida Fishing uploaded!
Haha!! I love this!
Is there a water seal in the drag cover?
4:42 makes me feel better that yours made the same noise. Thought reel was broken out of box as mine also made a slight rubbing noise when spinning handle
It can happen.. Thanks for watching!
Thanks for another great movie!
Thank you for watching and giving me great feedback!
Can i use skf or other brands baring for my upgrades
but its underspooled isnt it? could you tell me what braid you used? (mm and m) and great review thx for that
It is where I was comfortable with it. I believe it was 15lb Power Pro! Thanks for watching!
Thanks for the awesome video. You did an unboxing and upgrade video on a Shimano Ultegra 21 c3000xg, where can I get the upgrade bearings?
The upgrade bearings should be in the description below my videos!!
Great videos big fan, would you happen to know if the spool support for any of the 2021 Nasci models rd14382 can be upgraded?
Thank you! The spool support cannot be upgraded unfortunately as there is no pin through system to keep it intact.. you could probably use it but be careful taking off your spool or it can all fall out
I thought by upgrade means you put bearing on the oscillation gear, i'm curious what is inside of that reel.
This reel does not have the worm oscillation gear. If you see the schematic is has the standard cog gear with the main shaft resting pin so no bushing to upgrade out! Pretty simple on the inside!! Awesome reel for 100$
Hello! What braid do you have on your spool?
I believe it was 15# Power Pro! Thanks for watching!
Nothing like power knob , from its name it controls better than most knobs designe but becarefull little knobs r usually there to tell u that the reel is finese one so be kind with ur cranking under load .
Great point brother! I just like to be comfortable when fishing! Thanks for commenting!
do you know if all shimano reels in 2500 sizew has the same handle knob? i toke mine from my sahara fj to my vaNFORD .. BUT SOPMETHINGS FEELS STRANGE
I am not sure if they are the same size, I'm sorry! If it doesn't work, change it back!
Plz tell me about skf or other barings insted of ebay barings
Great videos! How do I find what upgrades are available? Is there cheat sheets? Ha. I have all shimano reels.
I wish there was cheat sheets haha! I do every calculation by myself.
Full sustain baring and knob upgrade
Already recorded just have to edit it and upload!!
Thanks bro Appreciate that
Love your work keep it up bro
After that can you plz make nasci 2021 upgrade video that will be my budget reel
Is there a bearing video upgrade?
This is a helluva reel for the money. The only thing that comes close is the Daiwa Fuego, which is a great reel but the Nasci just feels better in hand in my opinion.
There are a few more contenders now a days but still a great reel!
Do some okuma epixor and itx upgrades
Maybe one day! Thanks for the recommendation!
Great video! Any idea where I can get that stock paddle handle? I just ordered a Nasci3000 but I'm not sure if I'm going to like the stock T handle. Might want to put a stock paddle handle on it instead.
You can order the 2500 paddle handle directly from Shimano
Seems like tightlines6641 beat me to it!
@@WestCoastFloridaFishing 😂😂😂
Nice video brothers.. 👍🏻
I also really like this reel, the price is not too expensive..
Now I'm saving to be able to buy this reel.. 🤗
Haha! Great choice!
Im having a horrible time with this nasci and the miravel both wind knot problems and the nasci keeps dropping loops of braid down the spool. I close the bail manually both on gloomis rods not sure whats going on
You have a great channel, time to revive and add new content, please start with a Shimano STRADIC FM teardown👍🏻
Great looking reel
Looks fantastic! Thanks for the comment!
Can you make sustain upgrade video
It’s already in the works!! I will upload a new video soon!
Did u upgrade the bushings with bearings?
Of course!
@@WestCoastFloridaFishing 00# grade semi solid grease would be good for fishing reel. I did once reel rated grease but i do find 00# grade works better.
🎣😍🙌🏻
Thank you gorgeous ❣️
Hi, I recently purchased 2021 Nasci. I put braid in it and it had a hourglass line lay. I wonder if it can be fixed?
Amazing reel. Thank u for sharing mate. New friend here in abu dhabi.
No problem buddy! Good to have you!
@@WestCoastFloridaFishing I always watch your video. Idol. To have a knowledge want reel I will buy. Thanks any way
whats your personal opinion, this vs Spheros sw 4000? and what body material in nasci? its like spheros sw (metal stem combine with graphite sideplate) or Full graphite? thanks
Nice and informative video 👍
Is it as smooth as a tatula lt reel
nice one sir!!!
Will the same handle fit 2021 NASCI 4000XG ?
Looks sweet. Thinking about getting a 500 size for a dedicated panfish setup.
That would be a perfect reel for that application. Do they make a 500 size??
@@WestCoastFloridaFishing Sure do. Excited to grab one ASAP. Holds a whopping 100 yards of 4 lb test mono. I think I'm going to fish 3 lb Sunline Sniper on it.
The 500's are complete garbage!
Do not buy the 500,it's a totally different design and heavy to spin the handle due to excessive friction in the gear design.
Can this handle be changed to right hand side & can I use this for salt water?
Yes and yes! Just watch my video on how to properly clean off your fishing equipment after use and you should be good to go for a long time!
Can these upgrades be done to the 5000 version?
I am sure some of them can! Check the video description for size changes!
Love the tutorial bro
Thanks! Appreciate the support!
What size should I get for trout snoook
3000 size is typical for those type of fish.
How would it do in saltwater with some spray? Or should I go with the fuego with mag seal?
It wouldn’t do horrible and you’re probably better off with the Shimano as the mag seal doesn’t help seal as much as you think it does. I 100% recommended the spheros SW for some saltwater usage. Basically a Stradic for almost half of the cost
Fuego is way better, mine has been used for 3 years now and never been washed and dunked twice
@@johnd3901 I feel bad for that reel 🤣🤣🤣
@@WestCoastFloridaFishing feels same as the day I bought it. Magseal does a lot more than you think it does
did you add any shims to have cylindrical imbobbing? my nasci has an hourglass-shaped imbobbing
Did you sort out the hourglass line lay issue?
Put the stock handle back power knob looks like a winch
8.5 ounces is a little heavy.
It's a 100 dollar reel made of mostly aluminum.
Understand, I just bought a new Daiwa Caldia 2500 for $110, 6.5 oz and mag sealed,
I don’t think that’s a bad weight at all for most other aluminum reels in this size at this price range! Definitely not as light as the vanford at 6.3 oz but that’s mostly ci4+ so it makes sense..
@@artificialslinger9730 Yeah you can find the Caldia for $110 but its list price is double that. Soon we'll be able to find Nascis for like 70 probably lol. The Caldia is also a carbon-bodied reel.
@@artificialslinger9730 Just the opposite hear in the Ozark area. Mag sealed is Not
considered a gimmick by the reel experts I know. As far as flex I don’t have any issues, and I can sent u pics of 2 Browns caught this year 1 ten pounds and 1 over 13 caught above the Rim Shoals launch on the White River - no flex. Also my brother just caught 19 pound Striper on Beaver lake with one of my old Cauldias and a 30 year old Loomis rod.
Hi i from mexico and i wanna buy a power knot for shimano nasci c5000xg 2019 wishone you recomendded????
thats a dumb knob, if u really a fisherman, u know that big round knob will hurt ur fingers after long use.
its NAHSSI
for 100 dollars flip a coin fuego or nasci...