@@thomaskingsbury6560 calling dealers next week and see if anyone will let one go for 3 even..didn't know Palmetto had them at that price appreciate the info
@@keenanschouten2582 Incorrect, they produced it because there is a want for it. Unless you want to say the "need for it" was the need to sell a product.
Man these things look sweet but hard to justify when the super duty exists for $1400 on sale and even at full price almost half as much as an hk, for the price of this rifle you could snag a geissele with a red dot sling flashlight and maybe a suppressor, but if you gotta have it you gotta have it 🤷🏻♂️
@@jeffreyzeiszler8845 i can't hate i bought a scar a while back there's just something about it lol at least i can argue its still the lightest and most reliable of the battle rifles.....but i cant find a single reason to justify one of these other than its just plain cool and i have too much money lol
Honestly I dont think the wait times will be going back up the ATF started getting em thru quick cus they got accused of taking too long. If they slow it back down it’s not a good look
If you have 4k to spend, hard to go wrong with that one. Vast majority of people better off spending approx 1k on a Colt and the rest on ammo and courses, but the high end stuff is a lot of fun. KAC and LMT maybe?
When it comes to products from H&K, I'm somewhere between Indifference and Can't be bothered to Care. I've rarely even seen a H&K firearm at any LGS I've visited and those few times have a price tag attached to them that is eye watering.
Correct me if I'm wrong - Mil-Spec barrels are 0.8%-1.3% chrome content in the barrel and HK's MR barrels are 3% chrome content. Thus, the HK has enough chrome to prevent tarnishing under regular use and will our shoot in accuracy and longevity an identical barrel with a chrome lining. Why does the 416 have it then? One reason only - for full auto. One thing I'd like to add too - they drastically slimmed the profile of these new barrels to help reduce weight compared to the A1. Things like the new ambi controls and new gas blocks from the A4 will not fit the A1 models, thus I'm swapping some stuff around the safe to get the MR762A4 and an 11" MR556A4. I've already seen prices on the 16" 556 hit low $3k mark, but they sell out immediately.
Doesn't need a CL barrel because they aren't using US Mil-Spec 4150 CRMOV for their barrels. They're using the same barrel materials that are in the HK mil-spec versions and has stated that no US based Chrome Lining company are up to HK's Standard.
@Bulking_Smeagol Yes it will. The military has already proven 4150 is not even half as good as HK's and Steyr's metallurgy. The only difference between CHF production and button cut production is the toolings available for working on harder, stronger materials.
One rifle to rule them all.... I just wish it came out sooner, the money I've spent on rifles I could have just bought the A4 and been happy..... Buy once cry once.
I love your videos and am always excited when yall drop a new one. Ive gotten these MR556's and even 416's in my hands, and I really do like them. But...They dont do anything my LMT R20 Rahe doesnt do; Infact my Rahe is lighter and takes a bayonet with a Cold hammer forged Chromed lined, cryogentically treated barrel. Which is in itself a beautiful thing to say that we have so many choices today that we have the luxury to be snobby about the guns we like. Keep making great videos, buds.
There are so many options out there if you wanted a piston gun. Brn copis, Sig stuff and so on. Most civilians would be fine without the overbuilt nature of 416. No Chrome lined barrel for $3k is a big a deal to me though.
I already have the MR 556 A1 and MR 761 A1 and love them both. I probably have a MR 556 A4 11" in my future as I was considering doing a BRN4 build right before I found out HK was coming out with the A4's.
I have several HK's most very expensive now, but when it comes to an AR that costs north of 4k !! Nope, not me. I'll stick with me Lwrc M6 that cost half the price. It's not a hk, but it works great and never gives me issues and is still a piston gun.
A perfect rifle from HK been waiting on ambi HK416 style rifle it’s perfect the 11 inch model and sbr it and put a stock on it and an oss suppressor is my perfect rifle for cqb and the mr762 a4 for long range stuff
21 день назад
Im just glad the yeti is back in a video. Oh and the gun is 🔥 too! Jake, I’ll take yours after the non chrome lined barrel melts soon.
HK doesn't hate the consumer, they are truly just the only gun manufacturer who is utterly indifferent to the consumer and honest about their love for the consumers wallet. They only care about their contracts.
Saw all the A4 videos popping up recently, and I decided to wait for yours because I knew Jake wouldn’t pass up another HK video. Undoubtedly a well built rifle, just a level of performance gain I’m not willing to spend 2800~ more than my bcm for. I will have an mp5 though.
@@1911syndicateat least yall realize that. The amount of people who don’t realize that just because something works for some people doesn’t mean it’ll work for everyone is insane.
When it reaches double it’s accuracy standard with match ammo. The factory requirement is no greater than 30mm (1.18”) at 100m. Considering every example shown so far including my own shoots way better than that, around .5-.7 moa, it’s going to be a hot minute before factory swaps are necessary.
@@SG-LLCtrainingyeah the accuracy is crazy. James reeves was able to get just about a 1 MOA group using 55 grain wolf gold. Not to mention, 2 moa is still perfectly good for a rifle like this. It’s not a precision rifle. I doubt most people are going to be shooting anywhere near enough to actually wear out a barrel
SLY SLINGS ARE BETTER THAN VICKERS. The T handle is superior, especially when you're wearing gloves. The range of adjustment seems to be wider as well.
Don't forget, it comes with barrels made of "cannon grade" steel. Whatever that means. I know I have always been missing that "cannon grade" steel while plinking at the range.
@DocsSilverBullet Its like the adult equivalent of having supercars on the wall as a kid in your room. If you cant afford it yet, it should be inspirational to own one some day. If not for you, than someone else does.
@@DocsSilverBullet 90%? Brother, you just haven't met the right people. $3500 is KAC upper/ LMT lower and SCAR territory and i know alot of people with them. I have guns like this and work at a grocery store. You just gotta be patient, save, and not be tempted by garbage.
6:56 “can’t get military rifles” lol explain the Steyr AUG, Sig 553, any imported AK 😂 the lack of 416s is due to German export laws, not ATF restrictions
Finally someone gets it lol. German firearms laws and our laws and what we and they deemed as "assault rifles" isn't the same. I feel so bad for the germans because they can't have things that are Mlok or pic rails any sort of that matter because it "cools down the barrel and can lay more fire down" which ill say there's some truths to that but overall the barrel is still fucking hot when the rifle is being fired the temp is going to increase no matter what. What i mean by mlok cools the barrel down it actually somewhat does due to the fact for one it has multiple sections for air to go through and such so theoretically, but majority of the cooling has to do with the thickness and how light the barrel is also the materials and quality of steel too. German laws are so fucking weird also they can't really obtain bullpubs too from what ive heard
@@ChrisWoo-d9d Dude they export them within the EU. All we want id for them to tool up and replicate here in the USA. I'm gonna take my comments being deleted as positive reinforcement...
HK USA has literally cloned the MR223A3 and then updated it to I believe 416 A7/A8 standards. The biggest fault you can lay at their feet is the lack of chrome lining.(I am in this camp) The lack of a full auto carrier is due to German export laws. HK USA is owned by HK Germany if they print 416 on the mag well it’s against the law. It is built exactly like a 416 in materials just not full auto and a different name.
So… They ignored all the feedback and didn’t chrome line the barrel like everyone has wanted for YEARS. The only thing different from the mr556a1 functionally are the ambi controls and adjustable gas block. And they’re charging $3500 for this. What a joke
You confirmed my thoughts on if that was the "Crispy" that posted his "first can" on Reddit yesterday haha. Hell yeah brother enjoy your new can Crispytenders!
@@ChristianFarringtonBurton is the name and Shelby is the game my friend. The name of Crispy Tenders I thought was too close to y’alls love to fight about chicken places. Keep up the awesome content. Cheers 🥃
Just picked up one of each! 556A4 16” to replace my 556A1 16”, it rides with just an Elcan and a sling in Euro military fashion. It’s my main plinking range and match gun so the ambi controls will be great for locking the bolt back super easy to show clear, it’s honestly the #1 feature addition for me. Got the 11” because I’ve always wanted a shorty 416 and this one comes with all the fixings minus chrome, but the lifetime replacement guarantee is enough to soothe my worries there. The 762A4 will be replacing my 762A1 mainly for the ambi controls and the AGB. I have the Waffen Burke gas block on my 762 but it fouls up and sticks really quickly so I’m hopeful the factory HK one will perform better, plus it being a tune able 2 position is a huge upgrade over a multi position gas block. Too many to keep track of. Once they add chrome lining in house in Georgia down the line all these haters are sure to run out and start buying them in droves I’m sure! Ha. I definitely wish they were chrome lined but I heavily value how accurate these rifles have been for me so I’m willing to let them take the time to build manufacturing capability here and have a 95% rifle in the meantime that outperforms so many of the 2-3k options out there.
My issue with this rifle is only the price. It’s hard to imagine it’s worth a Geissele Super Duty and BCM together. And nobody will convince me it’s a better rifle than either particularly the Geissele.
The lack of a chrome lined barrel killed it for me. Sure, I'm sure you can swap it out, but who wants to do that after spending this much money? There is a reason why chrome lining is used across the board in milspec rifles, with accurized bolt actions being the acception.
Missed the opportunity to put in the clip from the classic movie “PCU” - “you’re wearing the shirt of the band you’re going to see? Gutter…don’t be that guy”
@pnwrob7041 1.5k with the cheapest handguard of your choice. Add in $100 for a lower so you're halfway there to a mr556a4 but a4 has german space metal as its barrel.
With flow through suppressors like huxwrx I just don't see the point in adding extra weight to the front of the gun and paying a premium for this rifle. D.I. + flow through suppressor = life.
@robertwallace4515 100% Dont get me wrong. Love HK. Innovative and their stuff really is some of the best due to their QC. I have a MP5 and it's a blast and if I had to grab it for defensive purposes, i'm very confident it would do its job and do it well. I also love the VP9. It's my go to fighting pistol if shot ever really does hit the fan. My nightstand gun is a P30. Carry a USP Compact. Needless to say, i'm a fan. But when it comes to the price tag of their rifles, i'm sorry but it's not happening. BCMs are lightweight, extremely rugged and overly simple. People claiming BCM is mid tier, they don't know a damn thing about real world gunfights. I run a MK2 Recce and i'll never look back. If I buy a complete AR from the factory, it's BCM.
@ScotchRanger945 i need to upgrade to a BCM. I'm running a 2019 PSA that I'm shooting alot more now because i have finally moved on to extended range with a primary arms 3x prism and it's at 1200 rounds now. I also have a tippman m422lr that iv shot thousands of rounds thru since its cheaper than 556. Idk how the PSA is going to hold up as the round count goes up. The PSA ARs seem to be okay but its budget for a reason.
@robertwallace4515 go buy a blem upper and lower when BCM has em. Theyre cosmetic blems at a great discount. Its just a cosmetic blem. Nothing wrong with the rifles themselves
HK makes the highest quality firearms. Period. No other company makes both pistols AND rifles with such quality. Fit, finish, reliability, aesthetics, reputation, etc. The only thing is their stuff isn’t cheap but the best never is. Great video!
FN, CZ, Sig. I wouldn’t say it’s the best there ever is. They don’t really have anything modern that’s good. The hk416 sucks, it’s heavy and is known to have parts failures. They make one good 45, it’s also heavy, terrible ergonomics and yeah. The sp5 was a horrible release, the only gun that’s went down $2300 msrp because of the issues.
“Oh yeah? Explain that!” * Hides price tag and availability *
3,600 to 4,000 dollar rifle lol
Palmetto had them at 3200.00. If not for holiday I would have it under the tree.
@@thomaskingsbury6560 calling dealers next week and see if anyone will let one go for 3 even..didn't know Palmetto had them at that price appreciate the info
That HK sweater bangs…the rifle is pretty nice too. 😂
Awesome as always guys
Thank you sir appreciate you watching and for commenting 👊🏼
Thanks guys for doing the chapters in the video - so we can jump to whatever part we want to know about.
Its so boring.
Thanks guys. Have the A1. Been wanting the A4 for years.
Great video guys. I watched it without ff. I already ordered 2 B&T srbs cans for it and filed my form 1 being one of the lucky first few with the 11”.
In 2024 you don’t need hk for quality rifles
Need doesn’t have a ton to do with it
@ incorrect, if Im spending thousands it NEEDS to be quality, and in 2024 I have options
@@keenanschouten2582 Incorrect, they produced it because there is a want for it. Unless you want to say the "need for it" was the need to sell a product.
Exactly. I didn't buy my Mark 23 because I needed a quality handgun. 🙂
I was replying to 1911 syndicate's post. FYI. LOL.
Man these things look sweet but hard to justify when the super duty exists for $1400 on sale and even at full price almost half as much as an hk, for the price of this rifle you could snag a geissele with a red dot sling flashlight and maybe a suppressor, but if you gotta have it you gotta have it 🤷🏻♂️
HK fan boys can’t say no… it’s not in there DNA 😊
@@jeffreyzeiszler8845 i can't hate i bought a scar a while back there's just something about it lol at least i can argue its still the lightest and most reliable of the battle rifles.....but i cant find a single reason to justify one of these other than its just plain cool and i have too much money lol
Where are you finding a $1400 super duty even on sale? Genuinely curious
@@jeffreyzeiszler8845”HK fan boys” can’t wait to throw their HK rail in the trash and upgrade to a Geissele rail. Explain.
@@jeffreyzeiszler8845”broke boys” always got to justify their psa trash build by complaining about a rifle that they’ll never ever be able to afford.
Merry Christmas guys great review!
Please do a video on the HK MR762 A4. Nice Christmas Sweater.
I bought my first suppressor last month. OCL polonium. ATF approval took 1 day. If youre gonna get a suppressor now is a great time people.
Honestly I dont think the wait times will be going back up the ATF started getting em thru quick cus they got accused of taking too long. If they slow it back down it’s not a good look
If you have 4k to spend, hard to go wrong with that one. Vast majority of people better off spending approx 1k on a Colt and the rest on ammo and courses, but the high end stuff is a lot of fun. KAC and LMT maybe?
Love how Chris can make that 16" look as small as Jake's 11"
What’s funny is Chris is so damn big that the 16” is proportional to the 11.5 on average dudes lol
@@SS-tr5ru The AZ Yeti could conceal carry the 11.5" with ease
@ appendix easy
Thanks guys for the good video
Thank y’all! Happy Holidays & Merry Christmas 🎄🤟🏿🤟🏿
Thank you sir. We appreciate you commenting and watching. Have a happy and safe Christmas 👊🏼
Is it hella expensive, yeah, no doubt, no argument here. But, the aesthetics of this rifle are nice. I like this a lot.
When it comes to products from H&K, I'm somewhere between Indifference and Can't be bothered to Care.
I've rarely even seen a H&K firearm at any LGS I've visited and those few times have a price tag attached to them that is eye watering.
the reason you don't care is revealed in your second sentence
Some complain about the huge HK logo on the hand guard. I say what’s the point of having a super expensive HK if you can’t flex at the range?
Plus it looks good. Red & black are the best color mates.
Correct me if I'm wrong - Mil-Spec barrels are 0.8%-1.3% chrome content in the barrel and HK's MR barrels are 3% chrome content. Thus, the HK has enough chrome to prevent tarnishing under regular use and will our shoot in accuracy and longevity an identical barrel with a chrome lining. Why does the 416 have it then? One reason only - for full auto. One thing I'd like to add too - they drastically slimmed the profile of these new barrels to help reduce weight compared to the A1. Things like the new ambi controls and new gas blocks from the A4 will not fit the A1 models, thus I'm swapping some stuff around the safe to get the MR762A4 and an 11" MR556A4. I've already seen prices on the 16" 556 hit low $3k mark, but they sell out immediately.
This video was all worth to figure out about William!
-Semi Auto Bolt Carrier Group
-Non Chrome lined barrel
The MR556A4 is just a neutered version of the 416. Much better options out there.
Doesn't need a CL barrel because they aren't using US Mil-Spec 4150 CRMOV for their barrels. They're using the same barrel materials that are in the HK mil-spec versions and has stated that no US based Chrome Lining company are up to HK's Standard.
@@boygonewhoopdataZZHK also only chrome lines the 416 barrels because of government requirements, not because they actually need it.
@@boygonewhoopdataZZlmao you think this will last more rounds than an FN, DD or Geissele chf chrome lined barrel? What a joke
@Bulking_Smeagol Yes it will.
The military has already proven 4150 is not even half as good as HK's and Steyr's metallurgy.
The only difference between CHF production and button cut production is the toolings available for working on harder, stronger materials.
@@boygonewhoopdataZZ military testing on these barrels would indicate otherwise. Braindead take
One rifle to rule them all.... I just wish it came out sooner, the money I've spent on rifles I could have just bought the A4 and been happy..... Buy once cry once.
After this I'm still happy with my lwrc 12.7 ic a5. Runs like a clock and doesn't give me eye farts.
I just got my first can and it took 4 days as well. Yes 4!
Mine took 11 months. MONTHS! instead of this rifle I might just go out and get 3-4 new cans instead
Thanks for ALL your HK content....
You’re welcome 🤘🏻
You should get the MR223A3 for less than two thirds of the cost
If it’s within the budget, please do a Spear Lt vs HK MR556 A4 comparison!
Preferring running the shorty you built or the factory 11?
Good vid. 1st mention I heard of additional adjustments to tune the gas block.
I love your videos and am always excited when yall drop a new one. Ive gotten these MR556's and even 416's in my hands, and I really do like them.
But...They dont do anything my LMT R20 Rahe doesnt do; Infact my Rahe is lighter and takes a bayonet with a Cold hammer forged Chromed lined, cryogentically treated barrel. Which is in itself a beautiful thing to say that we have so many choices today that we have the luxury to be snobby about the guns we like.
Keep making great videos, buds.
I have a love hate relationship with Hk but this thing is pretty dam cool. Honestly the 16” versions looks just as cool as the 11”
excellent coverage. i got mines!
I'd be interested in a cut take of Chris' philosophy on only running 16" length.
It’s just because he’s big and has long arms. A 16” to him is like an 11.5 to an average size person
We had the mr223 in ral8000 in Canada.... Had.
😢
Good to see the big man
Look guys, obviously you love each other. Just snuggle and make nice. It's Christmas time. Be with your special loved ones..❤❤
There are so many options out there if you wanted a piston gun. Brn copis, Sig stuff and so on. Most civilians would be fine without the overbuilt nature of 416. No Chrome lined barrel for $3k is a big a deal to me though.
Sigs aren’t that great. When Arisaka has to make a third party barrel brace because you refuse to acknowledge the problem does not bode well.
Checkout the caracal 816
what do you do that requires chrome lining? be honest
@@rustys.1070 nothing at all hence why he hasn’t returned.
@@rustys.1070 it is a $3k gun. You expect certain things for that kind of money. I want it to outlast me and get passed down as a family inheritance.
I already have the MR 556 A1 and MR 761 A1 and love them both. I probably have a MR 556 A4 11" in my future as I was considering doing a BRN4 build right before I found out HK was coming out with the A4's.
I have several HK's most very expensive now, but when it comes to an AR that costs north of 4k !! Nope, not me. I'll stick with me Lwrc M6 that cost half the price. It's not a hk, but it works great and never gives me issues and is still a piston gun.
just got a 16.5 mr556 a1. thinking about snagging a nefarious arms adjustable gas block to get it closer to the A4 until i can get my hands on one.
A perfect rifle from HK been waiting on ambi HK416 style rifle it’s perfect the 11 inch model and sbr it and put a stock on it and an oss suppressor is my perfect rifle for cqb and the mr762 a4 for long range stuff
Im just glad the yeti is back in a video. Oh and the gun is 🔥 too!
Jake, I’ll take yours after the non chrome lined barrel melts soon.
Lol
HK doesn't hate the consumer, they are truly just the only gun manufacturer who is utterly indifferent to the consumer and honest about their love for the consumers wallet. They only care about their contracts.
Saw all the A4 videos popping up recently, and I decided to wait for yours because I knew Jake wouldn’t pass up another HK video. Undoubtedly a well built rifle, just a level of performance gain I’m not willing to spend 2800~ more than my bcm for.
I will have an mp5 though.
And that’s totally fair it’s not going to be for everyone.
And this a honest no hate response which I can respect.
This is why you go to the HK class 😉
BCM doesn’t even make an Ambie lower. BCM’s parts mutts. BCM makes nothing. Parts distributor only.
@@1911syndicateat least yall realize that. The amount of people who don’t realize that just because something works for some people doesn’t mean it’ll work for everyone is insane.
What does HK consider a ‘shot out’ barrel?
When it reaches double it’s accuracy standard with match ammo. The factory requirement is no greater than 30mm (1.18”) at 100m. Considering every example shown so far including my own shoots way better than that, around .5-.7 moa, it’s going to be a hot minute before factory swaps are necessary.
@@SG-LLCtrainingyeah the accuracy is crazy. James reeves was able to get just about a 1 MOA group using 55 grain wolf gold. Not to mention, 2 moa is still perfectly good for a rifle like this. It’s not a precision rifle. I doubt most people are going to be shooting anywhere near enough to actually wear out a barrel
Love the sweater.
Tis the season to be merry
SLY SLINGS ARE BETTER THAN VICKERS. The T handle is superior, especially when you're wearing gloves. The range of adjustment seems to be wider as well.
MERRY CHRISTMAS !!
Don't forget, it comes with barrels made of "cannon grade" steel. Whatever that means. I know I have always been missing that "cannon grade" steel while plinking at the range.
this is the first gun im buying as soon as i get throught xmas
Merry Christmas fellas
Damn, love your videos!....
“Our Most Shilled for Video in Years”
Please HK, may I have some more?
The sweater might’ve been overkill but my thoughts on the gun are what they are.
@ I would certainly hope so, when you’re reviewing a rifle that 90% of your audience can’t afford.
@DocsSilverBullet Its like the adult equivalent of having supercars on the wall as a kid in your room. If you cant afford it yet, it should be inspirational to own one some day. If not for you, than someone else does.
@@DocsSilverBullet 90%? Brother, you just haven't met the right people. $3500 is KAC upper/ LMT lower and SCAR territory and i know alot of people with them. I have guns like this and work at a grocery store. You just gotta be patient, save, and not be tempted by garbage.
@@1911syndicate I actually like the sweater. It's like Cliff Huxtable was a 2A guy....and he could afford an HK.
6:56 “can’t get military rifles” lol explain the Steyr AUG, Sig 553, any imported AK 😂 the lack of 416s is due to German export laws, not ATF restrictions
B&T importing their stuff for them in limited runs... Its all nonsense. Its literally HK... They could if they wanted too!
It’s unique to HK. As stated many times
Finally someone gets it lol. German firearms laws and our laws and what we and they deemed as "assault rifles" isn't the same. I feel so bad for the germans because they can't have things that are Mlok or pic rails any sort of that matter because it "cools down the barrel and can lay more fire down" which ill say there's some truths to that but overall the barrel is still fucking hot when the rifle is being fired the temp is going to increase no matter what.
What i mean by mlok cools the barrel down it actually somewhat does due to the fact for one it has multiple sections for air to go through and such so theoretically, but majority of the cooling has to do with the thickness and how light the barrel is also the materials and quality of steel too. German laws are so fucking weird also they can't really obtain bullpubs too from what ive heard
@@ChrisWoo-d9d Dude they export them within the EU. All we want id for them to tool up and replicate here in the USA. I'm gonna take my comments being deleted as positive reinforcement...
HK USA has literally cloned the MR223A3 and then updated it to I believe 416 A7/A8 standards.
The biggest fault you can lay at their feet is the lack of chrome lining.(I am in this camp)
The lack of a full auto carrier is due to German export laws. HK USA is owned by HK Germany if they print 416 on the mag well it’s against the law. It is built exactly like a 416 in materials just not full auto and a different name.
Crispy steeping up his game
Dude continues to take it to the next level
@@Chrisblauyou guys better lock him down before he starts his own channel😂😂😂
So… They ignored all the feedback and didn’t chrome line the barrel like everyone has wanted for YEARS. The only thing different from the mr556a1 functionally are the ambi controls and adjustable gas block. And they’re charging $3500 for this. What a joke
Try watching the video.
@ what exactly did I say that wasn’t true…? Please tell me
Hk really has no shame
@@Bulking_Smeagol Ignoring feedback. Video explains otherwise.
You can buy a LWRC 10.5 Upper for 899.00 and build a very sweet rifle for much less.
Even these dudes get it finally. 😊
wish it was cheaper. same goes for the g36 when and if it happens. Definitely a cool gun though
Great video! I really appreciate all the good information. I just got mine today. I can't wait to get it to the range!
No way? Congrats that’s awesome dude have fun runnin it
@@Chrisblau Thank you!
You confirmed my thoughts on if that was the "Crispy" that posted his "first can" on Reddit yesterday haha. Hell yeah brother enjoy your new can Crispytenders!
Hey Shelby! I actually haven’t got my can yet! So sounds like it was someone else! I’ll enjoy the hell out of it when it gets here!
Commenting again to acknowledge that Shelby isn’t actually your first name🤣
@@ChristianFarringtonBurton is the name and Shelby is the game my friend. The name of Crispy Tenders I thought was too close to y’alls love to fight about chicken places. Keep up the awesome content. Cheers 🥃
Love this channel. As I retired RUC firearms instructor and ARV officer I approve.
Merry Christmas 🎄 and salutations from Belfast Northern Ireland 🇬🇧
Rock on bro 🤘🏻
Thank you sir. We love you and appreciate you commenting and watching from Belfast 👊🏼👊🏼👊🏼
@@Chrisblau This is my favourite new discovery. We can purchase weapons here, but not these type unfortunately.
That 12" is hard to find. Good for you.
Got 2 B&T can for my sp5 and ar, take total of 3 week from time of purchase to the time that I take it home from silence shop
yea im good ill stick with pws, or brn for a fraction of the money and buy ammo and optic on a good old psa lower.
never have been intrigued by HK, brother has a mk23 rather have a 1911 any day of the week. LMT > HK, but to each his own , cheers!
Happy Holidays
I ❤ the hk pullover
Are you guys in Utah? If so feel free to stop by our factory sometime!
@1911syndicate - If you had to choose between the MR556 A4, and the Spear LT, which would you choose? Why?
Just picked up one of each! 556A4 16” to replace my 556A1 16”, it rides with just an Elcan and a sling in Euro military fashion. It’s my main plinking range and match gun so the ambi controls will be great for locking the bolt back super easy to show clear, it’s honestly the #1 feature addition for me. Got the 11” because I’ve always wanted a shorty 416 and this one comes with all the fixings minus chrome, but the lifetime replacement guarantee is enough to soothe my worries there. The 762A4 will be replacing my 762A1 mainly for the ambi controls and the AGB. I have the Waffen Burke gas block on my 762 but it fouls up and sticks really quickly so I’m hopeful the factory HK one will perform better, plus it being a tune able 2 position is a huge upgrade over a multi position gas block. Too many to keep track of.
Once they add chrome lining in house in Georgia down the line all these haters are sure to run out and start buying them in droves I’m sure! Ha. I definitely wish they were chrome lined but I heavily value how accurate these rifles have been for me so I’m willing to let them take the time to build manufacturing capability here and have a 95% rifle in the meantime that outperforms so many of the 2-3k options out there.
My issue with this rifle is only the price. It’s hard to imagine it’s worth a Geissele Super Duty and BCM together. And nobody will convince me it’s a better rifle than either particularly the Geissele.
The lack of a chrome lined barrel killed it for me. Sure, I'm sure you can swap it out, but who wants to do that after spending this much money? There is a reason why chrome lining is used across the board in milspec rifles, with accurized bolt actions being the acception.
How does it stack up to the SIG 516?
i got the A1 and A4 HK should kick the hk sweater.
When do we get a review on that Lazarus 6?
At 1:45 I thought Chris finally decided to put down jakes misery
Missed the opportunity to put in the clip from the classic movie “PCU” - “you’re wearing the shirt of the band you’re going to see? Gutter…don’t be that guy”
can we talk about a brn4 build cost in comparison some time?
@pnwrob7041 1.5k with the cheapest handguard of your choice. Add in $100 for a lower so you're halfway there to a mr556a4 but a4 has german space metal as its barrel.
@@boygonewhoopdataZZthe Brn-4 is chrome lined… this isn’t. Take a guess at what actually lasts longer
@@Bulking_Smeagol german space metal > 4150 CL
@@boygonewhoopdataZZ German space metal that keyholes every 2000 rounds when it’s copper fouled. 💀 maybe you should do some digging on HKPro
@Bulking_Smeagol this is the first iteration of the MR556 in the USA to use Germam space magic barrel blanks. 🤪
With flow through suppressors like huxwrx I just don't see the point in adding extra weight to the front of the gun and paying a premium for this rifle. D.I. + flow through suppressor = life.
It's Mr. 556 to you!
👍Merry Christmas
Likewise sir thank you for watching
For that price, they could have at least made an anodized soft clone of the CAG blasters
Remind me how much a URGI can be had for again?
How does this compare to PWS?
For the price, PWS is hard to beat. So underrated.
is the 556 ever exciting?!
Do you prefer the ambi lower on this or the Griffin mk2?
Nice rifle but it’s hard to pick this over my LMT MARS-L Piston.
Random question but what’s the camo tape?
In all honesty every olight I have had has outlasted every surefire I have had and Ive had more QC issues with surefire too.
That real estate market better pick up or you’ll go from an HK man to a PSA guy
There’s plenty of PSA vids lol. We’re staying poor but with good guns
I'm up to 10 days on my first can.
I love you HK...but i'm sticking with BCM
You get more value at the price point of a BCM. Id rather have 3 BCM rifles over one HK
@robertwallace4515 100%
Dont get me wrong. Love HK. Innovative and their stuff really is some of the best due to their QC. I have a MP5 and it's a blast and if I had to grab it for defensive purposes, i'm very confident it would do its job and do it well. I also love the VP9. It's my go to fighting pistol if shot ever really does hit the fan. My nightstand gun is a P30. Carry a USP Compact. Needless to say, i'm a fan. But when it comes to the price tag of their rifles, i'm sorry but it's not happening. BCMs are lightweight, extremely rugged and overly simple. People claiming BCM is mid tier, they don't know a damn thing about real world gunfights. I run a MK2 Recce and i'll never look back. If I buy a complete AR from the factory, it's BCM.
@ScotchRanger945 i need to upgrade to a BCM. I'm running a 2019 PSA that I'm shooting alot more now because i have finally moved on to extended range with a primary arms 3x prism and it's at 1200 rounds now. I also have a tippman m422lr that iv shot thousands of rounds thru since its cheaper than 556. Idk how the PSA is going to hold up as the round count goes up. The PSA ARs seem to be okay but its budget for a reason.
@robertwallace4515 go buy a blem upper and lower when BCM has em. Theyre cosmetic blems at a great discount. Its just a cosmetic blem. Nothing wrong with the rifles themselves
Lmao.. BCM??? What a joke.
An HK product and no James?!
Is that newer accessory riser from Unity? The Eotech fits on it just fine?
With the extra heat, would you ever run a laser over the piston?
I don’t think it would be an issue. Rail stays pretty cool
@ awesome thanks.
HK algo sacrifice
HK makes the highest quality firearms. Period. No other company makes both pistols AND rifles with such quality. Fit, finish, reliability, aesthetics, reputation, etc. The only thing is their stuff isn’t cheap but the best never is. Great video!
FN, CZ, Sig. I wouldn’t say it’s the best there ever is. They don’t really have anything modern that’s good. The hk416 sucks, it’s heavy and is known to have parts failures. They make one good 45, it’s also heavy, terrible ergonomics and yeah. The sp5 was a horrible release, the only gun that’s went down $2300 msrp because of the issues.
As an mr556a1 owner I really hope someone starts selling a5 uppers! That’d be a real wallet saver.
😉😉😉
Well do get the upper to be like an A5 all you need to do is swap out the handguard and barrel pretty much
I'll take out a second mortgage if they make a run in RAL8000
That and the grey looking RAL number should be standard colors.
Stripped upper, brownells or NF chrome line barrel of choice, clone rail of choice, good to go