#1 TIP for BMW Engine Malfunction! Reduced Power; Fault Error Trouble Code 2C57 - DO THIS FIRST!
HTML-код
- Опубликовано: 5 сен 2024
- If you have BMW Engine Malfunction! Reduced Power Warning
Error Code 2C57 - Charging pressure control, plausibility Pressure too low
Check the end of the BMW vac pipe hose 11657588773
This vacuum hose is connected to the boost solenoid. My vac hose (BMW calls it a pipe) failed near 130,000 miles. It is easily repaired for $0 or replaced for $30+.
If you need a code reader, use the Bimmer-Tool app from the google play store. It works GREAT and is relatively inexpensive. You need the appropriate K+DCAN USB cable.
dude this was it.... hose wasnt even attached. Was about to order 300$ in random parts. Thank you.
Exact same. Thanks Arthur!
I had unattached mine when I changed the spark plugs. And that hose fixed the problem
My local shop wasn't able to figure out the reason for the Reduced Power fault code on my 2013 X5. Thanks to this video and a temporary fix with some electrical tape around the split end, the code no longer pops up. A new hose is on order. Thank you so much for posting this video.
Glad my video helped you. Be sure to LIKE and subscribe. THAT will really help me! THANKS!!!!!
Bro you saved my life! I went right to the vacuum line and walla crack line. The same one your showing 8 dollar fix who hoooooo
This was precisely my problem!!! You saved me hundreds of dollars in for that. I appreciate you. I'm going to buy 30 ft of 3.5 mm silicone tubing.... Liked and subscribe to my friend!
Thank you for this video, im dealing with this exact issue, i could hear the air while driving at normal operating temperature with the throttle engaged anywhere from 40%-100%. I have 2011 n55 engine in 335i coupe and it sounded like passenger side, plus air intake tube was replaced with aftermarket aluminum, so im certain this is my fix. Thank you for saving me time and confirming that your engine malfunction occurred at the same temp and same throttle position
Every car needs to be maintained..in reality with the newer BMWs they are pretty easy to work on and fix..u will go through coils,plugs,tires,brakes and MAF's
Hi!
I have a 2012 BMW X6M. I just want to make a comment on your video. I wish everybody would make their videos like you did yours. You know how to make a video clear, precise, and to the point! I do not know whether your "fix" will fix my car, but I will sure look into it.
I assume that my X6 will be very similar to your X5 regarding this area of concern. I have the exact same problem as you describe. Acceleration causes the reduce power to come on. It's very annoying. Thanks for your video. I'll check to see if I can fix my car with your simple fix.
Thanks.
Yes, X5 and X6 will be the same when it comes to this issue.
Thanks to you sir, your video was more then helpful and may the almighty God continue to bless you and your family in everything you do
I appreciate the positive feedback. You are very welcome. I'm glad it helped you. I'd appreciate a LIKE and subscribe. THAT will really help me. THANKS
Hi bro., I would love to say thanks for your video. I have a BMW 2011 X5 M-sport, it was display Engine Malfunction Reduced Power Warning, Drive with Caution ... and when I driving (push the gas pedal) the engine was shareking) , I would like to know is that my vehicle problems was same with your vehicle posted? How do I fix it, thanks again.
Got a 2011 335i got that after changing my starter frm and negative ground wire I get this dumb shit lol thanks for the video very informative
Great video!! I have an X6 and this also worked on mine!
I’m months late , but does it run the same way for the x6, having that problem as we speak
BMW is the acronym for Bring Money Weekly....ask me how I know!
couldn't agree more. I thought my prior Mercedes Benz ML was expensive to maintain. My BMW X5 is FAR MORE EXPENSIVE and has more oil leaks at 100,000 miles than my ML had at 200,000!
More like breaking my wallet
Big Money Wasted fits as well sadly
Thank you for the great advice, and where to start
Thanks for doing this video. Very helpful. I got this warning last night on my 2013 X5 35i 108k miles. I did check the hose, and it was still attached firmly. Even though I didn't remove it, there was no sign of cracking when I felt it. Also, checked the charge pipe driver side and looked fine. I searched for a while to find a DIY replacing the booster selenoid and found a good video. FYI, here is the link in case someone needs to know how to replace it. - ruclips.net/video/TNx1MrW6dmc/видео.html - I still have to scan for codes, but in the end I may just have to start with replacing the selenoid and see if that clears the fault code. Trying to avoid the mechanic emptying my pockets 😎
Hey I jusr ordered boost solenoids literally 5 min ago on fcp euro, was that was your problem was? I scanned it with mhd and my mechanic said most likely boost solenoids
@@B58_Nick
What was your car problems ?? What alarm and message on your screen?
@@B58_Nickdid the boost solenoid fix it?
did the boost solenoid fix it?
@@matejovich sure did bro, I replaced both of them
So glad I found this video I bought a car and it’s gone back to dealer 5 times and fix and still keeps coming on when I drive over 70mph it’s stressing me is it something serious or not a big deal ? Goes off after it flashes up stays on few seconds then gone 😊
What was the fix for your x5?
Had fault codes reset not come back on since but I haven’t drove it hard on motorway since so may come back on
Same issue on my 2011 x5 msport pkg, but couldn't find that tube...maybe location is different for my year...
There are two hose connectors not sure if a previous mechanic put it in the wrong place . Can you please let me know where this line goes . First o. Second tube ?
Liked and subscribed. Do you have a link to your silicone part?
sorry, I had a piece of silicone hose but ebay and online auto parts stores have it. Your local auto parts store might even have it
I have 2011 x5 xdrive50 can’t find this horse. I have engine malfunction reduce
2911n55 owner here- exactly- after acceleration runs and goes away after turning off for a while
I can't see it through can you show me clearly?
Hi I’ve got the same problem with my BMW 320i 2007
Q1 ; where did you find the code?
Q2 ; there’s no code indicating any where!
Q3 ; where should I check it first?
Thank you
I have a 2008 bmw 335i drive sedan, it gives me the same problem , what can I check first to diagnose the issue, I have to cel.
Any problem with that silicone line collapsed every time it feels vacuum vacuum? The reason the vacuum winds are kind of rigid It's too prevent Collapse.
NO problems with silicone line
Have a code for 2c58 wondering if it's in the same area
I HAV CQDE CF2915 ENGINE SPEED FROZEN SIGNAL WHAT IS MY ISSUE!!! $$$$$
Not solved my problem
I have an x6 should I check the same place? Can you still drive it?
i could drive it but the power is reduced. Be sure to like and subscribe. The X6 has the same problem
I’m just now getting this on mines
Mine is doing this same thing but I'm getting code 3166, 2DCE, 2EOF, 2BCO, and 2BEA. Any advice?
Sorry, I have no experience with those codes. But those codes I think indicate Valvetronic related problems. Good luck.
Replaced the valve tronic on mine its a pain. Then you have to take it in to bmw to get it reprogrammed.. It tells the engine the timing for the gears i think 🤔. But it was annoying in the Freeway...
Where did you connect it ?
it's very hard to see. This video shows the braided jacket vac hose and connection to the boost solenoid at around 7:53 ruclips.net/video/TNx1MrW6dmc/видео.html
The boost solenoid has 2 vacuum lines and 1 electrical connector.
😮😢😂
Where did you get the silicon hose with the connector?