Permatex Gasket Maker | The Right Stuff Grey - The Best!
HTML-код
- Опубликовано: 18 июл 2018
- The Right Stuff - amzn.to/2NtSnz3
Permatex Gasket Maker | The Right Stuff Grey - The Best!
The information contained in this video is for general information purposes only. I assume no responsibility for errors or omissions in the in the contents of this video.
In no even shall I be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence, or other tort, arising out of or in connection with the use of the video or the contents of the video. I reserve the right to make additions, deletions, or modification to the contents of this video at any time without prior notice.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Хобби
The Right Stuff - amzn.to/2NtSnz3
When I used it I let it settle for about an hour then tightened and went on my way. Unlike other where you tighten and wait a day.
You definitely don’t have to wait a day. I just did to make sure that there wasn’t gonna be a Problem down the road, plus didn’t need to use right away. I believe it tells you right on the package how long you have to wait before you can use it and like you said it’s not long. 😎
Will this seal up my wife so I don't hear her complaining any more?
Lol. Shaking my head. 😎
its good stuff but it won't work miracles brother.
Another brilliant upload 👍
Great preaentation as always!I enjoyed it till the end!
awesome video ;D love it
Awesome upload!
nice stuff :)
awesome dude!
*Really nice* ! Keep it up ,man ! 👍👍👍💪🌇
Great review
this upload is awesome and the video is fantastic my friend :)
Stopping by to watch 🐼👍🏻
Awesome 👍🕶
WATCHED IT MY FRIEND !!
Used it on my car oil pan. Its a must for me. I usually drive the car 4 hrs after as opposed 24 hrs after. I probbably could do it sooner. It forms a better seal than even a gasket for the oil pan.
This stuff is pretty amazing!
Great video my friend.
I have a small engine repair shop. The Right Stuff is the only gasket maker I use. I’ve tried everything and nothing beats it. It’s expensive as hell but worth every penny. When I’m working I’ve got to finish a job and jump on the next one. I don’t have time to wait for gasket maker to cure. I need to try the can he uses in this video. I’ve been using the one with the plastic trigger. It’s OK but this looks much easier to use
Thanks for the support! This stuff is better than great!
Cool great job 👍👍👍💪🌇 🎹🎵🎶🎵🎹
Very nice video my friend.!!
Hello my brother, another video show, always with great products, my like 22, big hug of the nando, Success, 100% retention in the video - (the video you saw the waters are all icy because they are waters of springs )
2:18 Look at that little timing belt! OHC! I have a Subaru 14HP OHC.
*Really nice great job* 👍👍👍💪🌇*Awesome great job* 👍👍👍💪🌇
Great man wow
Fantastic !!!!
Great content !!!
Thank you soo MUCH for Sharing my friend !!!
Stay Blessed !!!
Keep making great videos !!!!
Have a Great day !!!
No problem! I turned on bell for you also, I hope you can do the same :)
Nice video :))))
Great review friend 3:15
great my friend ^^
like 9
Nice
Will this get hard in the can if all of it is not used at One time saying is it reusable
I used the whole can at one time so I can’t answer that. Try asking permatex, they should know 😎
top video name
Can you apply this stuff and then put a gasket on top of it?
Why would you do that?
@@NameItBuildIt I have no experience in this, so was just asking. So basically I would need to use this gray stuff instead of the actual gasket OR get the gasket and apply a sealer?
No. You would use this alone if you need to or only a gasket if your application had a gasket. You must clean the surfaces first perfectly, without scratching them, before doing either.
@@NameItBuildIt think it’s safe to use on a dirt bike carb? I have a bike that hard to get parts for and have a fuel bowl leak
The problem is will constantly have fuel in contact with it which could break it down and it could clog the carb. Typically it would only come into contact with oil. I wouldn’t try it unless you ask the manufacturer first. 😎
At last someone shows how to use the tip of the can.
Haha. Thanks for the comment and sorry about noise. The sprinkler system came on just as I was at that point in the video and I couldn’t stop the build :)
I agree
Can I use on water pump or thermostat housing?
You can use anywhere you need a gasket, but I would try to get original gasket if that’s what it had from factory. 😎
great content fam 👍🏻👍🏻👍🏻
very useful +1 Sub
Thanks so much! I turned on bell for you also and will always stay active! Have a great night
-Rich
Gasoline really won’t penetrate it?
That’s the point 😎