I took it out to my balcony, wore a mask, closed the windows, started the air purifier at full speed, and pointed my blow dryer at full speed on the purifier fan from above the grill and all the dust inside blew out of the purifier. It does not clean perfectly but it's good enough.
i had hard time taking video of clips, mostly white panels which is clipped to the gray skeleton, the entire thing is clipped . i broke 2 clips by the way
Took 3 hours to dismantle and clean. What a xiaomi nightmare. For the bottom 2 panel sides, I got someone to hold it apart rather tightly, in order to see the clip. Vertically downwards, I used my tiniest screwdriver to fit and angle into the clip to take them apart. There's also that center portion/catch, just use a small screwdriver to push down and out. Hope this helps a bit!
Managed to undo the whole thing without breaking any clips, but i still couldn’t separate the sode panels from the top. After you open the first 4 clips, there’s a central catch. After that you can stick your hand inside and slowly apply force in the middle of the panel to make it curve. it will release the next set of clips
Yep, xiaomi purposely make it hard to clean so that you either, 1) buy new purifier when it got dirty OR, 2) send to their service support for some fee. Some bs right there.
Extremely difficult to disassemble for cleansing. A very stupid design. It looks good on the outside but not paying attention to easy of maintenance or ownership. They just don't care.....
I gave up lol fk this too much for a man who doesnt have that time. Yeah just do the strong blower just make sure the power is off, remove the filter open the lid and make sure you have like a stick to hold the fans in place while blowing.
I took it out to my balcony, wore a mask, closed the windows, started the air purifier at full speed, and pointed my blow dryer at full speed on the purifier fan from above the grill and all the dust inside blew out of the purifier. It does not clean perfectly but it's good enough.
im going to try this thanks
jesus christ, what a nightmare of a cleaning routine. I am considering throwing the entire damn thing away.
LOL Just watching this now and TOTALLY AGREE!! You probably won't see my comment, but you gave me a good laugh :D
I used compressed air. Seriously. They make it so you can't just clean it. It got dirty? Buy another one... Such a BS
doesnt show the most importatn part how did you unclip the rest of the panel where the clips are hidden in the top part
i had hard time taking video of clips, mostly white panels which is clipped to the gray skeleton, the entire thing is clipped . i broke 2 clips by the way
the top.part should be the last to remove , clips off easier, please be careful of the digital panel , it can be unplugged
Min Air klinet blev bare så ren tak for din video 😊🌺
They just should have made that lid removable. What a nightmare :)
Took 3 hours to dismantle and clean. What a xiaomi nightmare. For the bottom 2 panel sides, I got someone to hold it apart rather tightly, in order to see the clip. Vertically downwards, I used my tiniest screwdriver to fit and angle into the clip to take them apart. There's also that center portion/catch, just use a small screwdriver to push down and out. Hope this helps a bit!
Bad design on the fan, the ac M1 just unscrews from the top by hand.
Thanks, I would have been stuck without this video
Just throw the whole things away…my labour cost is not worth it haha
Managed to undo the whole thing without breaking any clips, but i still couldn’t separate the sode panels from the top.
After you open the first 4 clips, there’s a central catch. After that you can stick your hand inside and slowly apply force in the middle of the panel to make it curve. it will release the next set of clips
Yep, xiaomi purposely make it hard to clean so that you either, 1) buy new purifier when it got dirty OR, 2) send to their service support for some fee. Some bs right there.
cb make until so hard to clean
It is not possible to remove side panels so easy
Omg huhu. So much hassle. Can I just send my purifiers to you and then clean them? 😭😭
Extremely difficult to disassemble for cleansing. A very stupid design. It looks good on the outside but not paying attention to easy of maintenance or ownership. They just don't care.....
Thanks you
I gave up lol fk this too much for a man who doesnt have that time. Yeah just do the strong blower just make sure the power is off, remove the filter open the lid and make sure you have like a stick to hold the fans in place while blowing.
Have you tried to disassemble mi air purifier 2c?
i dont have purifier 2c , only the 2s and the pro 1
That's super overengineering lol.
В мене на таком кнопка вмикання отпала, тож прийшлось розбирати, чуть всі пальці собі не посчесував😅
You didn't show how to remove or pick the upper clip part of the side panels, how many hours it took you to remove them?🥵
it took me 2 hours to take apart, broke 2 clips
plastic clips remover will be big help, and also flat screw, sorry it was hard to video the internal parts
How to clean the filter I have Cleaned it with water last time...
Це жорстко , краще купити балон повітря з трубкою та продути😢
This appliance is a disaster!
Filter resuable?
can.reuse but it has annoying rfid reminder
I did that and my diaplay problem
pls be careful of the display, it can be unplugged slowly
Side panel not possible to remove.. your cheat cut shot..
there is some mystrerious charm btw 4:59 - 5:03, don't like the video because of that
after watching this video i will say use strong vaccine cleaner and throw it after it stops working