EXACTLY the tutorial I was looking for. Just getting into streaming and was hoping to use my Nanokontrol to control Voicemeeter and * BOOM * here we are! Thanks muh dude! fantastic explanation!
Great! I'm so glad it helped you! It's my first tutorial video so i'm sure i could have made a few things clearer. But i'm really glad it's doing some good for people!
I was planning out how to get a bunch of physical outputs from my computer just so I could pipe it into an audio mixer and have physical controls over Voicemeeter, but this save me so much headache and stress! I'm so glad that I could stumble on this today! Subscriber #2 here! Don't shoot yourself down on your explaining, you did a great job and look forward to implementing this myself!
That is exactly what i was trying to figure out before i came across this solution. Thought this might help a lot of other people aswell. Thankyou for the sub! I'm not sure i have much other knowledge to pass on, but if i ever do I'll be sure to upload it :)
just followed every single step to this tutorial today. one word. AMAZING! Your explaining was spot on and couldn't be more happier with the results! thanks for the help!
thanks for this video. It was exactly what i needed to pull the trigger to buy the nanokontrol. also perfect showcase and tutorial to show how to implement the usage with voicemeter. Thank you so much!!
hiiiii, can you send me your config pls?, is too much confusing for me. i had psyche dissability. a question too, if i pay for the license.. all the bugs and trial screen time out will be gone?. thank you. nice video anyway. is exactly i was looking for. unfortunately i speak spanish:( i you can do a translated video will be great. bye!!
Hi there. i can send you my config thats no problem. However unless you have set your inputs/outputs set exactly as mine it will need some parts adjusting. I'm not sure what bug's you are refering to so i cant say for sure if paying for the license will solve this. However it will stop the trial screen from coming up. Unfortunately i can't speak spanish so i cant help you with that.
you can fix the button mapping by setting the on and off value to the same value in kontrol editro (1 or some other value). voicemeeter expects the same button value for turning mute on and off. The led can still get out of sync!
This is 2 years later and thank you for making this comment! I could not figure out why it only worked every other time, this makes so much sense, you're a life saver!
Excellent video, I do wonder though if there's a way to use the knobs above the faders to control the channels volume to the stream, so knobs for stream volume and faders for my headphone volume.
funnily enough i have recently set this up for myself. So i use the volume knob's as External FX Send 1 on the channels i want to send to stream and then External FX Return 1 turned up full on Output A2 (Or whichever output you send to stream). It does make having the Record button send it to stream a little more difficult but it can totally be done, i can post my macro details for that if you'd like.
Here are my Button configurations for the record buttons; Request for initial State: Strip[0].FX1=0 Request for Button ON / Trigger IN: Strip[0].FX1=5.5
@@knottymister7252 I actually haven't ordered the korg just yet but that would he a great help! I hate having music too loud for my audience but I enjoy having my Spotify loud af
Great tutorial. I set the mute button on Toggle, min 127 max 127. Problem is the nanokontrol doesn't led the led status. When I restart my PC voicemeeter channels are set on mute but the nanonkontrol buttons aren't red. Any workaraound?
Sorry first time with this so maybe he explained it already but is it possible to set one of the macros for discord to mute yourself from discord chat but be able to still talk to twitch chat?
You would need to have your microphone going to two different output's in voicemeeter (A1 +A2 for example) and have A1 sent to discord and A2 sent to stream and then set the macro's accordingly. However the way i do this and a far easier way is just to set a keybind in discord to toggle mute. I hope this is helpful for you.
Hi dude, your video was amazing, i wanna ask you if you can show how you have this settings in obs, i think it will be so useful for me, ty very much and sorry for my english
Hi JaviM8. Glad you found the video so useful! So in OBS i have 2 audio sources. one for the overall stream audio output (everything but microphone) which on my setup is 'A2' Set to Virtual cable-B. Then one for my microphone which is 'A3' Set to Virtual cable-D. So my 2 inputs on OBS are Virtual cable-B For overall mix and Virtual cable-D for microphone. As a side note i have my A2 output set to a volume fader on my nanoKontrol2 so that i can adjust the overall volume of everything on the fly once i'm happy with the individual program level's (I normally have this set just slightly lower than my microphone) Also if you set the 'R' buttons to each channel to output to A2 (and A3 for micrphone) you can also stop certain programs being sent through to the stream and still be able to hear them yourself (sometimes handy for voice chat). I hope this is helpful for you!
@@knottymister7252 this is what i needed! is there any way to use this for a 2 pc setup? some how if so plz if you know how this can be done it would be appreciated because i aint trying to buy no damn goxlr for half of a graphics card no cap🧢
@@InSaiyanShinobi I havent personally set it up with 2 pc's however i'm sure you could. It would depend on what programs are being run on what machine i guess. My initial thought would be to have your HDMI audio output (or whatever output you have to the stream pc) set to it's own fader (say A2). You'd have to play around but I see no reason why it wouldnt work
Great video! Is it easy to set the faders back to unity? On VM you just double click and they auto reset to unity. If you move the software fader does the hardware fader simply re-engage control once you move it again?
Does this introduce any audio delay? I bought a Wave 3 which has Wave Link and can do this virtual routing type thing but it introduced about a 1 second audio delay. Trying to avoid this.
Whats gonna happen if I virtually adjust the input level through VB? In the goXLR case, the fader and the mute button will react correspondinly, which means u can controll the routed source (spotify, game, discord) no matter physically or virtually. I really want a GOXLR alternative but seems I cant find a perfect one....
There are midi controller's with active faders that will do what you want, however i expect it would be cheaper just to get a goxlr if you want that functionality. When i control the volumes through VoiceMeeter it will adjust the volumes until i touch the midi controller at which point it will revert to where the controller fader is currently set
I have just read the comment below by jarkino that says " Voicemeeter also has an option in the settings "Limit Remote Gain to 0 dbfs" I believe this will stop the faders going above 0db with something like a midi controller?" Maybe check to see if this option is ticked.
I use VoiceMeeter Potato to control the audio coming through my headphones independently from the audio going to my stream via OBS, I am using the knobs to control audio levels of different strips and want to know how to use the faders to control the audio levels directly inside of OBS via the plugin MIDItoOBS but I am having a little trouble
if you really wanne use the midi there also. You have to be sure the company you got your midi controller from supports multiple applications at the same time. The alternative is to use a virtual midi controller. But know the delay i experienced is like 3 seconds. Here it is. www.tobias-erichsen.de/software/loopmidi.html If you have the korg nano kontrol 2 the latest update of the driver with some software supports the multiple applications. So i recommend to do that first if you have that device.
I know this is kind of old, but just came across it and its really good!, one question, are you able to have a specific app, say spotify, have different volume for stream than for your headset? i.e. if you need lower the music volume on your headset on the fly without change the volume of music for stream
I wanted to do this forever, I found your Video when I researched if there were any setups for Voicemeeter with this MIDI controller. So thanks for the tutorial, you basically made me buy it. And when coding counting always starts at 0. Its because the first digital number is 0 and why would you waste it, just to start counting at one. You get used to it.
Hey man, I just started setting up my nanokontrol. I was fiddling with the settings to see if I can get the mute button to work without having to do the macros, and I think I got it. You need to switch the off and on values for each button in the Korg editor so off is 127 and on is 0, then enable the "PTT" button in voicemeters midi mapper. It toggles normally after that. Unfortunately it only seems to work for the mute buttons, because the PTT option isn't available for the other controls. Luckily I don't really have a need for the solo or record buttons with how i want to use it though.
To further add to this, I found just putting Off Value to 1 instead of 0 allowed it to function properly, without selecting PTT. I don't think it likes not having an off value! Solo and Mute both working without Macro buttons now.
I've just been in the same boat, looking at the GOXLR and realising the only feature I do not currently have is the faders. This seems like a much more fun & versatile solution!
Hi Everyone! I have now uploaded this video in a different format here: ruclips.net/video/c5elshHrvk8/видео.html Hopefully this will solve the resolution issues some people are having!
@@knottymister7252 hey man I got the same problem :D only 360p works. Every other RUclips video works :D On my phone and on my PC. I think the problem is on your end somehow. I hope I'll like the video :D I'll give it a try in 360p now. You might wanna re-upload if you still got the source file?! I think this video could be great, but seeing stuff is hard in 360p. Especially fonts
this video and everyone in the comments have been so helpful the buttons work great and I've been able to organize the knobs for the output volumes as well! ^^
Voicemeeter also has an option in the settings "Limit Remote Gain to 0 dbfs" I believe this will stop the faders going above 0db with something like a midi controller?
thanks for the tutorial. its exactly what i needet and the nano control 2 is perfekt for it. also the mute button have kinda problemes for me to i have to press it hard for it to work if i go to low it just take off the light its like there would be 2 button inside it
@@knottymister7252 aktually i found out it something else. i have to push the button 1 time for it to mute and then 2 times to unmute but then the button is still lit so i have to klick it again. when i clock it a second time it mutes again and everytime thats weird i think its kinda the same thing you had in your video at 13:00
THIS IS GOLD - i just bought KORG nanoKONTROL2 and had no idea how to MAP .... this video saved my time!
EXACTLY the tutorial I was looking for. Just getting into streaming and was hoping to use my Nanokontrol to control Voicemeeter and * BOOM * here we are! Thanks muh dude! fantastic explanation!
Great! I'm so glad it helped you! It's my first tutorial video so i'm sure i could have made a few things clearer. But i'm really glad it's doing some good for people!
Thank you so much Knotty mister i am just an amateur and wanted to use it mainly for the Mic enhancer etc. but also now you can use the sliders!
@@knottymister7252 only thing is the LED's won't toggle on? any idea
Great video, I'm only a minute in, but the fact that you are using the same software and controller gives me great hope!
I was planning out how to get a bunch of physical outputs from my computer just so I could pipe it into an audio mixer and have physical controls over Voicemeeter, but this save me so much headache and stress! I'm so glad that I could stumble on this today!
Subscriber #2 here! Don't shoot yourself down on your explaining, you did a great job and look forward to implementing this myself!
That is exactly what i was trying to figure out before i came across this solution. Thought this might help a lot of other people aswell.
Thankyou for the sub! I'm not sure i have much other knowledge to pass on, but if i ever do I'll be sure to upload it :)
just followed every single step to this tutorial today. one word. AMAZING! Your explaining was spot on and couldn't be more happier with the results! thanks for the help!
amazing! i'm so happy this tutorial was helpful for you! thank you for the lovely feedback!
thanks for this video. It was exactly what i needed to pull the trigger to buy the nanokontrol. also perfect showcase and tutorial to show how to implement the usage with voicemeter. Thank you so much!!
Excellent job. I needed this badly. 👍🏾👍🏾👍🏾👍🏾👍🏾
Thank you very much mate, you have helped me a lot with this tutorial, you already have my like, a hug
Thank you very much for this great tutorial. That’s exactly what I was looking for to round up my Voicemeeter setup.
hiiiii, can you send me your config pls?, is too much confusing for me. i had psyche dissability.
a question too, if i pay for the license.. all the bugs and trial screen time out will be gone?. thank you. nice video anyway. is exactly i was looking for. unfortunately i speak spanish:( i you can do a translated video will be great. bye!!
Hi there. i can send you my config thats no problem. However unless you have set your inputs/outputs set exactly as mine it will need some parts adjusting.
I'm not sure what bug's you are refering to so i cant say for sure if paying for the license will solve this. However it will stop the trial screen from coming up.
Unfortunately i can't speak spanish so i cant help you with that.
This is exactly what I needed. Thanks man! Perfect for my tabletop RPG stream. Cheers!
nice info
Bro i just bought this and wanted to do this your amazing dude.!
you can fix the button mapping by setting the on and off value to the same value in kontrol editro (1 or some other value). voicemeeter expects the same button value for turning mute on and off.
The led can still get out of sync!
This is 2 years later and thank you for making this comment! I could not figure out why it only worked every other time, this makes so much sense, you're a life saver!
Excellent video, I do wonder though if there's a way to use the knobs above the faders to control the channels volume to the stream, so knobs for stream volume and faders for my headphone volume.
funnily enough i have recently set this up for myself.
So i use the volume knob's as External FX Send 1 on the channels i want to send to stream and then External FX Return 1 turned up full on Output A2 (Or whichever output you send to stream).
It does make having the Record button send it to stream a little more difficult but it can totally be done, i can post my macro details for that if you'd like.
Here are my Button configurations for the record buttons;
Request for initial State:
Strip[0].FX1=0
Request for Button ON / Trigger IN:
Strip[0].FX1=5.5
@@knottymister7252 I actually haven't ordered the korg just yet but that would he a great help! I hate having music too loud for my audience but I enjoy having my Spotify loud af
The lights are out of sink 12:41 because you need to go in Kontrol Korg and put ON and OFF state to 127 and set button to toggle.
Thank you.
Thank you so much!
Great tutorial.
I set the mute button on Toggle, min 127 max 127.
Problem is the nanokontrol doesn't led the led status. When I restart my PC voicemeeter channels are set on mute but the nanonkontrol buttons aren't red. Any workaraound?
Sorry first time with this so maybe he explained it already but is it possible to set one of the macros for discord to mute yourself from discord chat but be able to still talk to twitch chat?
You would need to have your microphone going to two different output's in voicemeeter (A1 +A2 for example) and have A1 sent to discord and A2 sent to stream and then set the macro's accordingly.
However the way i do this and a far easier way is just to set a keybind in discord to toggle mute.
I hope this is helpful for you.
Can you help me the nano won’t connect to the editor software it can’t find it
Hi dude, your video was amazing, i wanna ask you if you can show how you have this settings in obs, i think it will be so useful for me, ty very much and sorry for my english
Hi JaviM8. Glad you found the video so useful!
So in OBS i have 2 audio sources. one for the overall stream audio output (everything but microphone) which on my setup is 'A2' Set to Virtual cable-B. Then one for my microphone which is 'A3' Set to Virtual cable-D.
So my 2 inputs on OBS are Virtual cable-B For overall mix and Virtual cable-D for microphone.
As a side note i have my A2 output set to a volume fader on my nanoKontrol2 so that i can adjust the overall volume of everything on the fly once i'm happy with the individual program level's (I normally have this set just slightly lower than my microphone)
Also if you set the 'R' buttons to each channel to output to A2 (and A3 for micrphone) you can also stop certain programs being sent through to the stream and still be able to hear them yourself (sometimes handy for voice chat).
I hope this is helpful for you!
@@knottymister7252 this is what i needed! is there any way to use this for a 2 pc setup? some how if so plz if you know how this can be done it would be appreciated because i aint trying to buy no damn goxlr for half of a graphics card no cap🧢
@@InSaiyanShinobi I havent personally set it up with 2 pc's however i'm sure you could. It would depend on what programs are being run on what machine i guess. My initial thought would be to have your HDMI audio output (or whatever output you have to the stream pc) set to it's own fader (say A2).
You'd have to play around but I see no reason why it wouldnt work
thank
Great video!
Is it easy to set the faders back to unity?
On VM you just double click and they auto reset to unity.
If you move the software fader does the hardware fader simply re-engage control once you move it again?
my nanokontrol is not showing up in voicemeeter. Do you know how to fix this?
does anyone know how to do the macro for mediakeys?
Does this introduce any audio delay? I bought a Wave 3 which has Wave Link and can do this virtual routing type thing but it introduced about a 1 second audio delay. Trying to avoid this.
Whats gonna happen if I virtually adjust the input level through VB? In the goXLR case, the fader and the mute button will react correspondinly, which means u can controll the routed source (spotify, game, discord) no matter physically or virtually.
I really want a GOXLR alternative but seems I cant find a perfect one....
There are midi controller's with active faders that will do what you want, however i expect it would be cheaper just to get a goxlr if you want that functionality.
When i control the volumes through VoiceMeeter it will adjust the volumes until i touch the midi controller at which point it will revert to where the controller fader is currently set
this needs to be updated you dont need the macros anymore..
for me the fader only goes up to 0 db. How can I change that goes up to 12 db
Sorry Christian, this is not a problem i have come across so i'm not sure how to help you with this. What midi controller are you using?
I have just read the comment below by jarkino that says " Voicemeeter also has an option in the settings "Limit Remote Gain to 0 dbfs" I believe this will stop the faders going above 0db with something like a midi controller?"
Maybe check to see if this option is ticked.
I use VoiceMeeter Potato to control the audio coming through my headphones independently from the audio going to my stream via OBS, I am using the knobs to control audio levels of different strips and want to know how to use the faders to control the audio levels directly inside of OBS via the plugin MIDItoOBS but I am having a little trouble
if you really wanne use the midi there also. You have to be sure the company you got your midi controller from supports multiple applications at the same time. The alternative is to use a virtual midi controller. But know the delay i experienced is like 3 seconds. Here it is. www.tobias-erichsen.de/software/loopmidi.html
If you have the korg nano kontrol 2 the latest update of the driver with some software supports the multiple applications. So i recommend to do that first if you have that device.
@@dashofawesome64 Thank you so much! Loopmidi and Midi-OX made this possible with such ease!
what can the knobs be used for...compression?
I mapped them to the 8 output faders.
Anything you like. Noise gate, compression, Reverb. Just set it in the MIDI Mapping menu
Does this work with other midi controllers?
It absolutely does, yea!
I know this is kind of old, but just came across it and its really good!, one question, are you able to have a specific app, say spotify, have different volume for stream than for your headset?
i.e. if you need lower the music volume on your headset on the fly without change the volume of music for stream
I wanted to do this forever, I found your Video when I researched if there were any setups for Voicemeeter with this MIDI controller. So thanks for the tutorial, you basically made me buy it. And when coding counting always starts at 0. Its because the first digital number is 0 and why would you waste it, just to start counting at one. You get used to it.
Hey man, I just started setting up my nanokontrol. I was fiddling with the settings to see if I can get the mute button to work without having to do the macros, and I think I got it. You need to switch the off and on values for each button in the Korg editor so off is 127 and on is 0, then enable the "PTT" button in voicemeters midi mapper. It toggles normally after that. Unfortunately it only seems to work for the mute buttons, because the PTT option isn't available for the other controls. Luckily I don't really have a need for the solo or record buttons with how i want to use it though.
Thats great. I'm glad you found an alternative solution. the macro's can be a bit of a pain!
To further add to this, I found just putting Off Value to 1 instead of 0 allowed it to function properly, without selecting PTT. I don't think it likes not having an off value! Solo and Mute both working without Macro buttons now.
I've just been in the same boat, looking at the GOXLR and realising the only feature I do not currently have is the faders. This seems like a much more fun & versatile solution!
Hi Everyone! I have now uploaded this video in a different format here: ruclips.net/video/c5elshHrvk8/видео.html
Hopefully this will solve the resolution issues some people are having!
RUclips just DOES NOT want me to watch this, it never loads past the first 15 secs
Thanks for the video, I'll find a way to watch ut
aha: looks like only 360p works. Fun.
@@dailythenoob Sorry about that. Maybe you've done something to upset youtube.
Hope you find it helpful!
@@knottymister7252 hey man I got the same problem :D only 360p works.
Every other RUclips video works :D
On my phone and on my PC.
I think the problem is on your end somehow.
I hope I'll like the video :D I'll give it a try in 360p now.
You might wanna re-upload if you still got the source file?! I think this video could be great, but seeing stuff is hard in 360p.
Especially fonts
@@maxzett That's very strange. i'll try and upload it again!
@@knottymister7252 it only let's me play it at 360p also, I thought I was going mad.
this video and everyone in the comments have been so helpful the buttons work great and I've been able to organize the knobs for the output volumes as well! ^^
Voicemeeter also has an option in the settings "Limit Remote Gain to 0 dbfs" I believe this will stop the faders going above 0db with something like a midi controller?
Can you bind the Buttons on the Left Side (play,stop,rec,fwd,rwd) to Buttons you like ?
You absolutely can yes! Just open MIDI Mapping in Voicemeeter
thanks for the tutorial. its exactly what i needet and the nano control 2 is perfekt for it.
also the mute button have kinda problemes for me to i have to press it hard for it to work if i go to low it just take off the light its like there would be 2 button inside it
I'm glad you found this helpful!
That's odd. i've not found that problem myself. Maybe you have a faulty unit?
@@knottymister7252 aktually i found out it something else. i have to push the button 1 time for it to mute and then 2 times to unmute but then the button is still lit so i have to klick it again. when i clock it a second time it mutes again and everytime thats weird i think its kinda the same thing you had in your video at 13:00
hello i might soun dumb but really need help..how do u install the audio cable? the video doesnt explain very well and idk how to set that bit up