GP thank you I asked the other day about this!! Very cool. That second STIHL 47 foot long bar was so long you almost were not in the video. Thank you great demonstration
It looks like the WCS cover definitely gives you a more focused stream of chips. I clyod see it being handy if you're cutting in a place where you don't want the chips flying everywhere and making a big mess. A situation close to a property line where you don't want to make a mess in a neighbors yard might be a good example. It would pose a problem when it came to bucking logs on the ground. The concentrated stream would build a pile of chips up in one spot faster and need to be cleared out more often maybe to get your saw close to the ground to finish a cut 🤷♂️
@groundpounder24365 Absolutely! I'd say I find myself trying to block the chip spray with my leg more often than I find myself kicking the pile of chips out of the way.
@@groundpounder24365 you’re welcome! Stupid RUclips hasn’t been sending me notifications of your videos even though I have them turned on. This morning I’m going to a local rigging class held by a tree service. You can never know enough.
Did you have to take the limiters of the hi lo screws to tune the 880 after the bark box install? I've got one for my 880 but haven't installed it yet.
I've made 1 cut with the bark box installed, and that was one you saw on camera there. So you and I will both learn 🙂 I was curious as to what it was going to do, and that's the main reason I was playing with the throttle like that.
@groundpounder24365 I see. My saw shop mechanic said I should be able to increase fuel enough without having to remove the limiters, but to tune with a tach just to be sure. I just permanently mounted a tach to the saw, she's a dedicated Alaskan sawmill powerhead.
It sure seemed to..admittedly I have done zero tuning to the carb as of yet after the installation of the bark box. That there was the first cut on it...
Love gordys parts ..use them all for last 4 years. Or so..I do need to get those covers.i am thinking of down sizing the doggs there great protection for case when saw sucks persimmons bark or anything Into the cases .but lose few inches on bars .there just little big on the 462 and 500i. But there nice ..wish he had medium. Size dogs.generlly don't need them that big here in east Tennessee. Except on big trees .going to switch back to the velocity stack on 500i it's much cleaner setup with more flow .then max flow and less messy to assemble after swap ing filters .but not good for rain with no cover .I'll just keep a max flow filter ready for raining days.those covers are huge difference.have one on 661 but hardly use that heavy thing .500i is great for big wood if your just bucking try a 8 pin sprocket taz man told me it's better for that
GP thank you I asked the other day about this!! Very cool.
That second STIHL 47 foot long bar was so long you almost were not in the video.
Thank you great demonstration
I'm not really sure if there was a difference on camera, but there sure is in person
Ah, just found this after seeing your reply to my comment on your other video. I'll have to give this a watch.
What you think??
It looks like the WCS cover definitely gives you a more focused stream of chips. I clyod see it being handy if you're cutting in a place where you don't want the chips flying everywhere and making a big mess. A situation close to a property line where you don't want to make a mess in a neighbors yard might be a good example. It would pose a problem when it came to bucking logs on the ground. The concentrated stream would build a pile of chips up in one spot faster and need to be cleared out more often maybe to get your saw close to the ground to finish a cut 🤷♂️
@zaccheus I feel like it's one of those 6 one way, half dozen another kind of things
@groundpounder24365 Absolutely! I'd say I find myself trying to block the chip spray with my leg more often than I find myself kicking the pile of chips out of the way.
Looks like it’s well worth it, definitely cleans out better
It surely does
Woof! 😂 thank you for the demo, and chainsaw noise.
Whaaa?
@@groundpounder24365bark box.
@dan-dan-da-treeman yeah...I called the damn cover a bark box 🫤 I almost just deleted the video cuz of it...oh well...f it....
880 is LOUD
Those slabs would make some nice end tables GP. Safety first.
🫡
Looking good!
Thank ya
@@groundpounder24365 you’re welcome! Stupid RUclips hasn’t been sending me notifications of your videos even though I have them turned on. This morning I’m going to a local rigging class held by a tree service. You can never know enough.
Armchair experts! 😂 Love that sarcasm! Lots out there.
Yeah I should probably chill with it 😅
Im a big fan of wcs clutch covers they add some weight but they stout
For sure
Nice demo GP
Thanks Jc
Good job
Thank ya sir
Man thanks for busting out the 880 😁
For sure
Both saws are beast but that second saw with that bar is so freaking cool . 👍🏻🇺🇸🪵🔥
Thanks stopping in Del..the second one is the 880 with a 41" bar on it
Yah don't know why stihl change to such a small chip cover the Gordys are awesome i just got the captive nuts for my covers 👌
It really dont make any sense to me..but hey, Gordy saw a need for these and capitalized on it.. great products at Wcs
Did you have to take the limiters of the hi lo screws to tune the 880 after the bark box install? I've got one for my 880 but haven't installed it yet.
I've made 1 cut with the bark box installed, and that was one you saw on camera there. So you and I will both learn 🙂
I was curious as to what it was going to do, and that's the main reason I was playing with the throttle like that.
@groundpounder24365 I see. My saw shop mechanic said I should be able to increase fuel enough without having to remove the limiters, but to tune with a tach just to be sure. I just permanently mounted a tach to the saw, she's a dedicated Alaskan sawmill powerhead.
Did the 880 perk up with the bark box? I imagine it wakes up quite a bit
It sure seemed to..admittedly I have done zero tuning to the carb as of yet after the installation of the bark box.
That there was the first cut on it...
@@groundpounder24365if all goes well i will be putting one on an 084 this weekend, pretty amped about that.
@@Super-Dave-Outdoors NICE!!
Love gordys parts ..use them all for last 4 years. Or so..I do need to get those covers.i am thinking of down sizing the doggs there great protection for case when saw sucks persimmons bark or anything Into the cases .but lose few inches on bars .there just little big on the 462 and 500i. But there nice ..wish he had medium. Size dogs.generlly don't need them that big here in east Tennessee. Except on big trees .going to switch back to the velocity stack on 500i it's much cleaner setup with more flow .then max flow and less messy to assemble after swap ing filters .but not good for rain with no cover .I'll just keep a max flow filter ready for raining days.those covers are huge difference.have one on 661 but hardly use that heavy thing .500i is great for big wood if your just bucking try a 8 pin sprocket taz man told me it's better for that
I agree..I wish the dogs were slightly smaller as well
Nice!
🫡
That saw lol.lol 😂 LOL..
Show them if ya got them
I'm a clown...west coast clutch cover..NOT bark box
🫡
Looking good!
🫡