hi coverman66 bad news I got into a serious car accident with my Trailblaze r SS . I wanted to start a youtube channel with my TBSS but unfortunately God has other plans for me. This was my second TBSS looks like I have bad luck with them but that doesn't stop me ....I will always be a Chevrolet fan ! watching yours brings joy to me . keep it up and thanks
@@Coverman66 it broke my heart seeing her into disaster .....but I came out alive and thats all that matters thank you for your videos reminds me of mine 👍
Awe man, you're killing me with those crab cake looks! Keep up the great work bro, and I'm glad you didn't show heating the spring and just trim it! That's a much better way of lowering; than messing with the springs metal integrity!
Liked for the crab cakes shout-out! I got an aftermarket rear coil spring and strut kit for my 1998 Olds Regency as the GM air system was shot years ago. The rear is about 3/4" higher than the front, looks a bit like a 70's jacked-up Nova. Thanks for the 'rule of thumb' when cutting - I'll go for 1/2 of a spring revolution first. I'm OK if the rear is a tiny bit higher, just as long as it is not lower.
Float like buttafly/sting like a bee....ima BAAAD MAN!! The champ is herE!! U could play him in a movie if they made another one without will lol or a documentary, u are like a spitting image frfr
I have been watching your videos for some time now during my project I took your advise and purchased ls simple front end on my LSA swap and I can honestly say it has been a big disappointment so far I am hoping he gets back to me soon because this is the third belt that it has destroyed
@@Coverman66 he has actually contacted me and we've talked over the phone he seems like a really awesome guy and is more than willing to help me get it straightened out so hopefully we'll get it resolved
Hey Terry I have a pontiac g8 gt the l76 6.0. I having a misfire in cylder number 1 (p0301) I have spark and fuel and can't figure out why I having this problem. I'm going to try and search for a exhaust leak and see if that my problem but so far no luck. Any advice would be much appreciated 🙏
did you check the coil? i would swap the coil with a cylinder that not having the problem and see what happen.. sometime the wire could be the culprit as well.
Clean an subtle♤ -saw a person use wide belt sander fora more even spring face - grinder werks but b gentle w the hard disc(lota meatgone+heatbuild up)..120+grit "flapper"lil slower tho -acquired a carN1998(poorly slammed).. blew drvr ball joint@4 way Fri nite. Dealer pressed old out N new in on Sat(1st one free@that). fixed sat eve drove Sun morn on ruff rd, heard clatter, stopped (uneven driveway) Rpsnger coil collapsed from sitn compressed (bn heated) could dislodge by hand lol - fill up gas tank, pack it w friends/fam/ ladies then finda speed bump/rd krater.. stop ther an measure for clearance.
Im tripping on this dude, Mohammed Ali to the T....I love it
lolol thanks brotha MPG
I literally only clicked the video to drop the mohammed ali dig to see this comment here right at the top already lmaooooo
hi coverman66 bad news I got into a serious car accident with my Trailblaze r SS . I wanted to start a youtube channel with my TBSS but unfortunately God has other plans for me. This was my second TBSS looks like I have bad luck with them but that doesn't stop me ....I will always be a Chevrolet fan ! watching yours brings joy to me . keep it up and thanks
Chino.. that broke my heart reading this.. let me know if you need anything to get right.. i will help out best i can brotha..
@@Coverman66 it broke my heart seeing her into disaster .....but I came out alive and thats all that matters thank you for your videos reminds me of mine 👍
Tell you what Brotha.. should our paths cross, i will give you the key and we will go for a ride..
@@Coverman66 thank you coverman66 if you ever come to Orlando hit me up brotha
you know i will.. i have a couple of things going on that might land me there.. thanks CG.
Awe man, you're killing me with those crab cake looks! Keep up the great work bro, and I'm glad you didn't show heating the spring and just trim it! That's a much better way of lowering; than messing with the springs metal integrity!
i cant help it.. i love those crab cakes.. lolol
It does look much better now, great job on the trimming!
thanks brotha RM.. it rides a lil better too..
Liked for the crab cakes shout-out! I got an aftermarket rear coil spring and strut kit for my 1998 Olds Regency as the GM air system was shot years ago. The rear is about 3/4" higher than the front, looks a bit like a 70's jacked-up Nova. Thanks for the 'rule of thumb' when cutting - I'll go for 1/2 of a spring revolution first. I'm OK if the rear is a tiny bit higher, just as long as it is not lower.
keep me posted.. love to see the results.. thanks brotha El
Love it , your allways thinking outside of the box 💪🇦🇺
Very nice tip on lowering the ride height! Thanks for the info Terry!
Any time!.. much appreciated thanks brotha Marty..
Float like buttafly/sting like a bee....ima BAAAD MAN!! The champ is herE!! U could play him in a movie if they made another one without will lol or a documentary, u are like a spitting image frfr
I was bout to say the same thing!!
lolol thanks brotha Chad.. i get that all the time and its a beautiful compliment..
I love car tips from a young Muhammad Ali lol
much appreciated brotha Justin.. thanks
Whooo, for a second there I thought you were going whip out the torch and drop it old school low rider style.
no no no.. dont want to ruin the integrity of the spring.. this way is alot safer. thanks brotha B..
Doctor does it again great view
lolol thanks brotha DB..
Your mind is your greatest weapon! If you cant create your own methods withoutscrewing something then something is wrong😅
Looking good Terry, keep it going
always brotha, thanks much appreciated.
thanks again for great tips and information
my pleasure brotha Manuel.. thanks for viewing..
I have been watching your videos for some time now during my project I took your advise and purchased ls simple front end on my LSA swap and I can honestly say it has been a big disappointment so far I am hoping he gets back to me soon because this is the third belt that it has destroyed
Russell, im sorry to hear this.. i have not had any issues with the bracket.. what problems are you having? maybe i can help.
@@Coverman66 he has actually contacted me and we've talked over the phone he seems like a really awesome guy and is more than willing to help me get it straightened out so hopefully we'll get it resolved
thats whats up.. Murphy is a great guy..
Details. Tiny, tiny, details. That's what separates the good from the great. An obsession to the tiniest details that most can't see.
thanks brotha Noah..
Looking good 👍 👌
Thanks for the content. I bet you can do a badass Denzel Washington impression Lol.
lolol this is a first lolol i will practice and do it on one of my next videos. lolol watch for it lolol
@@Coverman66 lol
Hey Terry I have a pontiac g8 gt the l76 6.0. I having a misfire in cylder number 1 (p0301) I have spark and fuel and can't figure out why I having this problem. I'm going to try and search for a exhaust leak and see if that my problem but so far no luck. Any advice would be much appreciated 🙏
did you check the coil? i would swap the coil with a cylinder that not having the problem and see what happen.. sometime the wire could be the culprit as well.
@@Coverman66 yea man I swapped cylinder 1 with 3 and did same thing with the plugs wire and coilpacks
@@Coverman66 I pulled the heads found a bad lifter. Now I'm going to cam it lol 😆! Thinking of going with a btr stage 2 cam
I don't think I ever lowered a vehicle in my life. I always wanted them to ride higher than physically possible!!! lol...
lololol
Clean an subtle♤
-saw a person use wide belt sander fora more even spring face
- grinder werks but b gentle w the hard disc(lota meatgone+heatbuild up)..120+grit "flapper"lil slower tho
-acquired a carN1998(poorly slammed).. blew drvr ball joint@4 way Fri nite. Dealer pressed old out N new in on Sat(1st one free@that). fixed sat eve drove Sun morn on ruff rd, heard clatter, stopped (uneven driveway)
Rpsnger coil collapsed from sitn compressed (bn heated) could dislodge by hand lol
- fill up gas tank, pack it w friends/fam/ ladies then finda speed bump/rd krater.. stop ther an measure for clearance.
Can you show before and after pictures?
i will see if i have any and post them.. thanks brotha Hector
Muhammad Ali Jr.! 😄
you know it lolol
Muhammad Ali's younger brother
lolol i get that all the time lol
NO before and after picture truck ride height, ,come on man
i know.. it was an last minute video once i started, i started getting emails about this..
I clicked because i saw muhammad ali
Too much effort for little gain.
the plan was for just a lil gain without having to change the springs or shock.. the truck sits beautiful.. thanks..