Hindsight 101 yes! Bought it yesterday and looked at the manual and thought “no way”. Googled vids, watched yours and then thought “seems straightforward”. I was worried about lifting it up by myself but it was not as heavy as I thought.
Great video. You are an excellent teacher. I am handy, but had injured myself installing my previous opener. Only a 3 week wait for a professional convinced me to endeavor it once again. There was no RUclips in 2001 during my last install, I was overjoyed to find your clear and concise video series. A leisurely install review the video as I went resulted no issues. Homelink in my older Toyota is going to be one for sure.
Man! I wish you could demonstrate every how to video. That is extremely descriptive and you show the pieces you are describing by turning them to show the piece and how to connect. Every video I have seen is either someone who is talking from across the room or someone from another country that is difficult to understand. Not just language but low voice volume. Awesome!!
Thanks for this video. Replaced my 22 yr old Craftsman today and only needed the manual at the end for wiring the sensors in unit, button near door and adjusting up and down.
There are a lot of Chamberlain installation videos out there but yours is absolutely the best. You give a level of detail that few others can match. Thank you for posting!
I just wanted to say your a video on the cell phones getting SIM cards out help me out a lot the other day and you are a modern genius my friend keep it up
I'm glad you included how to adjust the trolley travel from 14:53-15:30 Other videos didn't include this. My trolley wasn't anywhere near the top of it's limits when I got the whole thing assembled and I worried that I'd done something wrong. Thanks so much!
Thank you very much. Great video. Very well done. I was able to install my b1381 opener by watching your video. I didn’t even try using the manual after watching your video. Keep up the great work.
Thank you for this! I installed the same model. Your instructions are not only infinitely better than the paper instructions but WAY better than any video on RUclips.
Derrick - Your video is awesome! Helps me tremendously with the installation of the garage opener. Chamerlain's instructions and video is no match for your videos. Thanks again and keep up with the great work. +++++++
my wife wants me to put up the same model # next spring but i didn't know if i wanted to do this myself but this is giving me confidence i can do this and save me money.
Derrick, I just bought you a cup of coffee on your link. I forget to sign it. But here is my comment that I wanted to tell you...I'm about to install a new Chamberlain Garage Door Opener and your video was very thorough and greatly appreciated. Very well thought out too
The instructions that came with my opener almost completely omitted the important task of how to connect and tension the belt. If it hadn't been for this video, my installation would have been a lot more difficult. Thank you.
WOW!! I am installing one right now. I wish I had seen this video before I started. This video is sooo much help. All the things I had to do over again are addressed in this video. this video is sooo helpful and Chamberlain's instructions are WORTHLESS!!
I hope Chamberlain has paid you a consulting fee for creating this video. Their documentation is pathetic and this saved a lot of frustration... thank you!
Thank you very much for posting this! Very well done! As others have said, you did such a fantastic job of showing each part and component as you went through the assembly and provided great advice and tips along the way. This is vastly better than trying to follow printed instructions and your presentation is excellent!
Wow man, i thought this was a Chamberlain video. Thanks for the hard work you put into this, I'm getting two of these units next week (two car garage.)
Well Derrick, you make it sound easy or at least not overwhelming. I will try it out since my existing garage door is on its last leg. Thanks for your videos. I watched both to get an idea. Thanks
Thank you fine sir. Your video was perfect. Installed it by myself in about 4 hours with troubleshooting the error I was getting. Door was closing to tight and opening back up.
I sent you a tip well deserved I felt like I did everything 100% right and I struggled for two to three days with my garage opener your point of adjusting the down set and upset made a difference thank you
Great video - brief and to the point. Will be installing my Chamberlain 510 belt drive unit this weekend - this was helpfull to prep me for the install. Thx for posting !!!
Homerun install thanks to this video! My wall controller is different though, and WiFi wouldn't connect, will try it again tomorrow with a fresh slate. Thank you again for all your help!
Very nicely made video! I installed a Genie in my garage today, it was very similar to this, but the belt was way easier to install as the threaded ends were pre-assembled.
Hindsight 101 same as yours I believe but led lights instead of bulbs. I opened the box and looked at the manual and was discouraged. Went on RUclips and found your channel and got it up running in no time :) again big thanks!
Thank you, I found your instructions easy to follow. Personally I learn better by watching a video than reading, my only suggestion would have been to add the door adjustment instructions in the video as these are critical
Thank for the comment. It was a very long and hot day and I didn’t have the energy to re-record it. But I may do a follow up bc you are right it is important
Thank you so much. I’m not very good at following instructions and the Manuel was not particularly well done or easy to understand. You made the job so much easier for me and I appreciate it.
I know I'm just adding to the pile here, but I wanted to say THANK YOU for making this video, it was immensely helpful and very thorough. Kudos to you good sir! :)
I installed a similar unit. It was a huge pain. The standard unit works for garage doors up to 7 ft. If your garage door is taller than that you need to purchase an extension accessory to make a longer track. It does not come with the parts needed to mount to the ceiling of the garage, so be sure to pick up some perforated angle iron for that part.
2 QUICK THINGS AND A MAJOR SHOUT-OUT! QUICK THINGS FIRST: 1. If you watch this INCREDIBLE video and decide to install the garage door opener afterwards, please also watch part 2 beforehand and READ THE COMMENTS made by Blondie SL regarding installation of the battery pack (which Derrick does in part 1 at 15:36). These comments are near the bottom of the comments section in the part 2 video. I followed Blondie SL's advice and DID NOT INSTALL the battery pack when Derrick does in part 1. Instead, I waited until after I installed and programmed everything (garage door opener, numeric keypad, door keypad, and MY IQ app) before installing the battery pack. 2. At 5:26 of this video (part 1), Derrick transitions from step 3 to step 4 (see owner' s manual), but he forgets to do "substep" 3 of step 4 (winding the belt around the socket). At 6:34 he acknowledges that he skipped doing that, and he reminds viewers that they must, indeed, wrap the belt around the socket before completing substeps 4, 5, and 6 of step 4, and then beginning step 5. My advice: when it comes to step 4, read the owner' s manual before/at same time you watch video and don't forget to wind the belt around the socket! For all it's worth, I brought my laptop into the garage and mostly watched the video during installation process, only referring to owner's manual when I need clarification or didn't quite understand something. MAJOR SHOUT OUT! This video series is the very best how-to-video I've ever seen on RUclips. Major props to Derrick and any/all who helped him. I'm 95% certain that I couldn't have installed my garage door opener if I hadn't watched them. These videos are THAT GOOD, people! Thank you, Derrick, for taking the time and energy to make them. You have enabled me to enjoyably and successfully do something for myself and my family. Thank you, bro!
You are VERY welcome, Derrick! Also, in #2 comment I mistakenly referred to the sprocket as a “socket.” Oops, my bad. 😬Wind the belt around the SPROCKET, not sprocket!
Just discovered your video after taking four hours to install my Chamberlain B1381. This is the longest time its ever taken me to install a garage door opener. All my friends call me to install their openers (tops....two hours for an install). The biggest item was installing the belt with that spring loaded nut. It's the one item you glossed over in the beginning. The 43 pages of instructions, in my opinion, did not explain the spring nut well. What I discovered was, after removing the long screw with the spring, unscrew the spring from the long screw. Make sure the belt is attached at the other end to the sled assembly and that the belt is not twisted and is threaded around the sprocket. Put the flat sided screw through the sled assembly hole. Pull the belt toward the screw and put the link nut through both ends and secure with the locking link. If you choose to connect the screw with the belt without having everything in place, it's possible to connect the ends backwards. Once the locking link is in place, Slide the long screw through the hole and reattach the spring nut. If you continue to hand tighten the spring nut, it will automatically engage and you won't have to use a wrench (not a set of pliers) and a screwdriver to activate the spring. A suggestion: Even though the instructions indicate to use pliers.....never use them. Use the correct wrench size or an adjustable wrench or a socket set. Pliers can leave a nut mangled. Pliers are very destructed. Thanks for your video.
You are awesome dude!!! So far the most effective video ever. I'm about to set mine up. I watched a few videos but yours is the best and the simplest one. I hope Chamberlain sponsor you.
Thank you for the video details, I was able to review yours with my installation and found that I missed the spring/nut release step so I just did that about few minutes ago, all good! Sprint/nut release's just required little bit of force and it would pop out!
I have a Facebook group if you can post a picture there I might be able to help. Also try 2 flathead screw drivers to separate the locking piece. m.facebook.com/?_rdr#!/groups/236612123674028?ref=bookmarks
Thanks so much for taking the time to put this video guide together. Your insight and instruction gave me the confidence to go ahead and install a new replacement Chamberlain B4545 garage door opener today. I ended up replacing all of the hardware except for the door sensors. I kept the existing ones in place and put the new ones away for spares.
Thank you so much for taking the time to make this video, It sure helped me alot. These belt drives are super quiet compared to the screw drive I used to have.
Tech came and noticed right away that my door was sticking to the weather seal on the outside of the door. I cleaned the tacky residue off and the initial start problem was solved. I only had one spring on a double door and it was 9 years old so I had him replace and add an additional spring. He lubricated and tightened the hinge bolts but the door is still really noisy. I had already replaced the rollers to nylon. I may be thinking about insulated doors. Thanks for the help.
Thanks for sharing. Have you measured voltage and resistance on the sensor wires? You mentioned unit won't work without sensors hooked up but if one doesn't need them you should be able to fool the unit with resistor. Will find out more when I go through install soon.
Great video. I give you 9 out of 10 stars because of how informative your video is. I deducted one star because I didn't like how you mounted the door opener. The mounting braces are typically supposed to be running in a vertical position with cross bracing if needed. I noticed the opener tweaked a slight bit at one point in the video but I guess if it works for you then that's what matters.
Great job Derrick. Hindsight is very appropriate because I found your installation video 2 days after I installed mine. I have a question about the Trolley and Belt system and have not been given much help from the Chamberlain support folks. There is a plastic cover over a portion of the Trolley which is opposite the area where the Belt attaches. The Belt rubs against that portion of the Trolley and I'm concerned that it will cause the belt to wear prematurely. I'm curious to know if your setup shows the same thing. I have a photo showing the problem but don't see any way to post it. Thanks again for the video and any help you or your followers may provide.
I actually never notice what you were talking about until now I have the same thing it rubs up against but mines been installed for a year and I see no issues those belts are pretty tough I think they’re made out of like rubber and have some like steel in them or something so I think you’ll be good
This young man should be on TV. This video was well thought out and well presented
Thank you glad you liked the video
@@Hindsight101 detailed explanations.thanks
great job.
@@c19comandante57 thank you
@@Hindsight101 You are welcome brother.
it takes time to make videos,edit,etc.
Great job. Thanks a lot for your knoledge and experience with this stuff.
You're welcome
THANK YOU! Because of you this almost 49yo women dismantled old and installed new garage opener.
Charles Dunn Awesome I’m glad it worked out. Did it go better than you thought?
Hindsight 101 yes! Bought it yesterday and looked at the manual and thought “no way”. Googled vids, watched yours and then thought “seems straightforward”. I was worried about lifting it up by myself but it was not as heavy as I thought.
Charles Dunn oh ok good to hear.
Hello Derek. I wanted to say thank you for a very informative video.
Thank you
Your video really helped me out a lot to the point where I did not even read the manual. Thank you so much for your help!
Awesome glad I could help
I'm an installer with 24 years experience... this is an excellent video..
Wow thank you
Do i have to use all of the black rails?
Thanks so much. Your step by step guide is much better than Chamberlains own install guide.
Thank you
Great video. You are an excellent teacher. I am handy, but had injured myself installing my previous opener. Only a 3 week wait for a professional convinced me to endeavor it once again.
There was no RUclips in 2001 during my last install, I was overjoyed to find your clear and concise video series.
A leisurely install review the video as I went resulted no issues.
Homelink in my older Toyota is going to be one for sure.
Wow thank you for the comment. Its always great to know that my video helps people
Man! I wish you could demonstrate every how to video. That is extremely descriptive and you show the pieces you are describing by turning them to show the piece and how to connect. Every video I have seen is either someone who is talking from across the room or someone from another country that is difficult to understand. Not just language but low voice volume. Awesome!!
I appreciate the feedback thanks for watching
Thanks for this video. Replaced my 22 yr old Craftsman today and only needed the manual at the end for wiring the sensors in unit, button near door and adjusting up and down.
Awesome glad it worked out
This is the best instructional video i've seen on RUclips.
Thank you
I just installed this same opener watching your video. It was a HUGE help! Well done!
Thank you
Thanks!
Welcome
There are a lot of Chamberlain installation videos out there but yours is absolutely the best. You give a level of detail that few others can match. Thank you for posting!
Wow thank you
I just wanted to say your a video on the cell phones getting SIM cards out help me out a lot the other day and you are a modern genius my friend keep it up
Thank you I use these methods all the time
Thanks, I Couldn't have done it without your instruction. Very detailed.
Signed All Thumbs
Ha ha glad it worked out
Excellent Video! Thanks for the tutorial and instructions. I watched it prior to installing my new Chamberlain and it helped me greatly!
Thank you for the comment and I am glad it helped
I paused it and did it step by step with him worked awesome
Glad everything worked out
Awesome video! So much better than trying to get through the goofy manual. I'll definitely buy you a cup of coffee. Thank you!
Thank you and glad it helped
I'm glad you included how to adjust the trolley travel from 14:53-15:30 Other videos didn't include this. My trolley wasn't anywhere near the top of it's limits when I got the whole thing assembled and I worried that I'd done something wrong. Thanks so much!
No problem glad I could help. How you are enjoying you new opener.
Good video for someone who has never installed an opener. Very detailed. Made our installation a breeze. Many thanks!
Thank for watching
Best step by step video ever
Thank you
Thank you very much. Great video. Very well done. I was able to install my b1381 opener by watching your video. I didn’t even try using the manual after watching your video. Keep up the great work.
Thank you so much, if you would like to see some of my future "how to videos" feel free to subscribe
Thank you for this! I installed the same model. Your instructions are not only infinitely better than the paper instructions but WAY better than any video on RUclips.
Thank you. I love this model I can’t believe how quiet it is compared to my old chain version
@@Hindsight101 agreed!
Thanks you really help me out were chamberlain didnt , keep it up , appreciate ya
No problem glad the video helped out. Thanks for watching
Good presentation, young man. keep up your good skills and thanks for sharing them.
Thank you
Excellent video; installed the B1381 version of this yesterday and could not have done it without this excellent video! Thanks for doing this!
Thank you so much for the comment
Derrick - Your video is awesome! Helps me tremendously with the installation of the garage opener. Chamerlain's instructions and video is no match for your videos. Thanks again and keep up with the great work. +++++++
I appreciate the compliment it good to know the video is helpful.
my wife wants me to put up the same model # next spring but i didn't know if i wanted to do this myself but this is giving me confidence i can do this and save me money.
It's not bad just time consuming
Great job 👍 appreciate people that offer up personal experience to help others
My pleasure thanks for watching
Derrick, I just bought you a cup of coffee on your link. I forget to sign it. But here is my comment that I wanted to tell you...I'm about to install a new Chamberlain Garage Door Opener and your video was very thorough and greatly appreciated. Very well thought out too
Thank you for the kind words and the donation. I often wonder if this videos help or not.
This is really a great presentation. Straight forward, and not cluttered with clumsy jokes or a horrible music track. Well done, Sir.
Derek Smalls thank you I seem to get that comment a lot about the unnecessary stuff. Ha ha
Gotta say, nice job explaining this. Especially the portion where you joined the wires together for the sensors and such
Thanks glad it helped
The instructions that came with my opener almost completely omitted the important task of how to connect and tension the belt. If it hadn't been for this video, my installation would have been a lot more difficult. Thank you.
You are welcome thanks for the comment
Amazing video! The instructions are crispy clear:) You will not find a better video tutorial out there! Thanks Derrick:)
Thank that means a lot
SO much easier than trying to follow the unneccesarily complicated instructions. Thank you!
Awesome happy it helped. Out of curiosity what didn't you like about the paper instructions.
WOW!! I am installing one right now. I wish I had seen this video before I started. This video is sooo much help. All the things I had to do over again are addressed in this video. this video is sooo helpful and Chamberlain's instructions are WORTHLESS!!
Thank you it’s much appreciated
I hope Chamberlain has paid you a consulting fee for creating this video. Their documentation is pathetic and this saved a lot of frustration... thank you!
Thank you I really appreciate the compliment
G
Thank you very much for posting this! Very well done! As others have said, you did such a fantastic job of showing each part and component as you went through the assembly and provided great advice and tips along the way. This is vastly better than trying to follow printed instructions and your presentation is excellent!
You're very welcome!
Super helpful and clear instructions! I watched your video and finished installing my unit by myself! One woman! 😄 Thank you so much for this.
You are welcome
Wow man, i thought this was a Chamberlain video. Thanks for the hard work you put into this, I'm getting two of these units next week (two car garage.)
Thank you for the comment I installed 2 as well and the second is much easier once you understand all the steps
Well Derrick, you make it sound easy or at least not overwhelming. I will try it out since my existing garage door is on its last leg. Thanks for your videos. I watched both to get an idea. Thanks
Its time consuming but not hard, good luck and reach out if you have questions
Thanks for a great presentation. We couldn't have figure it out from Chamberlain's instructions.
No problem glad it helped
Thank you fine sir. Your video was perfect. Installed it by myself in about 4 hours with troubleshooting the error I was getting. Door was closing to tight and opening back up.
Awesome
You have provided an excellent How to for the first timer with Garage Openers. Excellent instructions my friend....Well done and thanks again!
Thanks for taking the time to comment
I sent you a tip well deserved I felt like I did everything 100% right and I struggled for two to three days with my garage opener your point of adjusting the down set and upset made a difference thank you
Thank you so much I appreciate it
Thank you for sharing me and my dad really needed it
No problem hope the video helped
Thank you so much you save me $250. I followed your instructions to the letter and you were on point.
Excellent!
Man, this video saved me so much time! Thanks 👍 perfect cadence on speech and video instructions.
Thank you
Great presentation Derrick, I bought the exact Chamberlin just today. Your instructions were great!! Well done sir!!!!
Thank you much appreciated
Exactly the tutorial I need on Chamberlain GD opener. Tks for sharing,bro..
Glad the video helped thanks for watching
Thank you so so much! I really really really appreciate this. Chamberlain needs to pay you
Thank you for the comment
No shit. Concise, well planned, great TV presence. Kudo's.
Thank you it’s nice to know it’s appreciated
Thank you! Helped me out a lot during my installation.
You're welcome
Thanks for video! Never even opened instruction booklet. Spot on perfect- thank you
You are welcome
Hey Derrick thanks for taking the time to make this video, it is very helpful.
No problem thanks for watching
Great video - brief and to the point. Will be installing my Chamberlain 510 belt drive unit this weekend - this was helpfull to prep me for the install. Thx for posting !!!
Thanks for the comment good luck
Super Professional!!!! Great job and Thank You!
Thank you
Very detailed instructional video. Thank You!
Thank you
Homerun install thanks to this video! My wall controller is different though, and WiFi wouldn't connect, will try it again tomorrow with a fresh slate. Thank you again for all your help!
No problem my pleasure
@@Hindsight101 - The wife's look of surprise and happiness when the garage door actually opened and shut was quite nice! :-)
That’s awesome if you need anything else please ask
Thank You! I did an install today and your video was very informative and helpful
You are welcome thanks for watching
I spent 4 hours installing one of these. I should have watched this video and done it in less that a hour!
Thanks for the comment at least you can share it with the next person so you can save them some time
I would hire it out
Thanks I will be replacing my garage door opener soon. I just started your video. Thanks for your time in advance.
No problem thanks for watching
Very nicely made video! I installed a Genie in my garage today, it was very similar to this, but the belt was way easier to install as the threaded ends were pre-assembled.
Excellent video!... very well explained!
Glad you enjoyed it! Thank you
Fantastic job...keep up your videos...thank you.
Thank you I appreciate it
This video was a huge help . . . thank you!
You are welcome
Thank very much. Very detailed and saved me $200.
You are welcome thanks for watching what model did you end up installing?
Hindsight 101 same as yours I believe but led lights instead of bulbs. I opened the box and looked at the manual and was discouraged. Went on RUclips and found your channel and got it up running in no time :) again big thanks!
great great video Hindsight 101!!!!
Thank you
Thank you brother - saved me a lot of time !
No problem glad to hear
Your video is awesome. Worked like a charm. Thanks for saving me an hour or two!
Thank you glad the video helped
This video was awesome and you made my Chamberlain B970 installation super easy. Thank you so much!
Thank you I'm happy it worked out
Thank you, I found your instructions easy to follow. Personally I learn better by watching a video than reading, my only suggestion would have been to add the door adjustment instructions in the video as these are critical
Thank for the comment. It was a very long and hot day and I didn’t have the energy to re-record it. But I may do a follow up bc you are right it is important
Excellent instructional vid. Thank you sir. I had 3 units to install and this tutorial saves me several hours of heartache. Blessings.
You are welcome
Thank you so much for this! So well done, saved me so much rime. Chamberlain needs you.
You’re welcome and thanks for the feedback lol
Thank you so much. I’m not very good at following instructions and the Manuel was not particularly well done or easy to understand. You made the job so much easier for me and I appreciate it.
Thank you so much for your comment
I know I'm just adding to the pile here, but I wanted to say THANK YOU for making this video, it was immensely helpful and very thorough. Kudos to you good sir! :)
Thank you the comments are always appreciated
I installed a similar unit. It was a huge pain. The standard unit works for garage doors up to 7 ft. If your garage door is taller than that you need to purchase an extension accessory to make a longer track. It does not come with the parts needed to mount to the ceiling of the garage, so be sure to pick up some perforated angle iron for that part.
Awesome video! Did mine this afternoon and this was a TREMENDOUS help!
Great to hear it worked thanks for watching appreciate it
2 QUICK THINGS AND A MAJOR SHOUT-OUT!
QUICK THINGS FIRST:
1. If you watch this INCREDIBLE video and decide to install the garage door opener afterwards, please also watch part 2 beforehand and READ THE COMMENTS made by Blondie SL regarding installation of the battery pack (which Derrick does in part 1 at 15:36). These comments are near the bottom of the comments section in the part 2 video. I followed Blondie SL's advice and DID NOT INSTALL the battery pack when Derrick does in part 1. Instead, I waited until after I installed and programmed everything (garage door opener, numeric keypad, door keypad, and MY IQ app) before installing the battery pack.
2. At 5:26 of this video (part 1), Derrick transitions from step 3 to step 4 (see owner' s manual), but he forgets to do "substep" 3 of step 4 (winding the belt around the socket). At 6:34 he acknowledges that he skipped doing that, and he reminds viewers that they must, indeed, wrap the belt around the socket before completing substeps 4, 5, and 6 of step 4, and then beginning step 5. My advice: when it comes to step 4, read the owner' s manual before/at same time you watch video and don't forget to wind the belt around the socket! For all it's worth, I brought my laptop into the garage and mostly watched the video during installation process, only referring to owner's manual when I need clarification or didn't quite understand something.
MAJOR SHOUT OUT!
This video series is the very best how-to-video I've ever seen on RUclips. Major props to Derrick and any/all who helped him. I'm 95% certain that I couldn't have installed my garage door opener if I hadn't watched them. These videos are THAT GOOD, people! Thank you, Derrick, for taking the time and energy to make them. You have enabled me to enjoyably and successfully do something for myself and my family. Thank you, bro!
WOW thank you for the compliment. Also glad it worked out for you
You are VERY welcome, Derrick! Also, in #2 comment I mistakenly referred to the sprocket as a “socket.” Oops, my bad. 😬Wind the belt around the SPROCKET, not sprocket!
“SPROCKET, not ‘socket’” ! Yikes, I guess I’ve lost all my brain power after I finishing this installation! Double oops. 😬😬
Just discovered your video after taking four hours to install my Chamberlain B1381. This is the longest time its ever taken me to install a garage door opener. All my friends call me to install their openers (tops....two hours for an install). The biggest item was installing the belt with that spring loaded nut. It's the one item you glossed over in the beginning. The 43 pages of instructions, in my opinion, did not explain the spring nut well. What I discovered was, after removing the long screw with the spring, unscrew the spring from the long screw. Make sure the belt is attached at the other end to the sled assembly and that the belt is not twisted and is threaded around the sprocket. Put the flat sided screw through the sled assembly hole. Pull the belt toward the screw and put the link nut through both ends and secure with the locking link. If you choose to connect the screw with the belt without having everything in place, it's possible to connect the ends backwards. Once the locking link is in place, Slide the long screw through the hole and reattach the spring nut. If you continue to hand tighten the spring nut, it will automatically engage and you won't have to use a wrench (not a set of pliers) and a screwdriver to activate the spring. A suggestion: Even though the instructions indicate to use pliers.....never use them. Use the correct wrench size or an adjustable wrench or a socket set. Pliers can leave a nut mangled. Pliers are very destructed. Thanks for your video.
Derrick great video for I am going to have to replace my mom's garage door opener soon! Peace
Thanks for the comment
Good video. I had to buy a new opener just this morning.
Thank you
You are awesome dude!!!
So far the most effective video ever. I'm about to set mine up. I watched a few videos but yours is the best and the simplest one. I hope Chamberlain sponsor you.
thank you so much
Thank you for the video details, I was able to review yours with my installation and found that I missed the spring/nut release step so I just did that about few minutes ago, all good!
Sprint/nut release's just required little bit of force and it would pop out!
Great! Glad it helped.
I've been messing with mine for about 40 minutes and can't get the damn thing to pop out. Not sure what to try next.
I have a Facebook group if you can post a picture there I might be able to help. Also try 2 flathead screw drivers to separate the locking piece. m.facebook.com/?_rdr#!/groups/236612123674028?ref=bookmarks
Thank you very much for your time and effort! This made my install so much easier! You Rock!
Thank you you're welcome
Thanks so much for taking the time to put this video guide together. Your insight and instruction gave me the confidence to go ahead and install a new replacement Chamberlain B4545 garage door opener today. I ended up replacing all of the hardware except for the door sensors. I kept the existing ones in place and put the new ones away for spares.
Thats awesome congrats on doing it yourself
Very nice video. One of the best
Thank you
Thank you so much for taking the time to make this video, It sure helped me alot. These belt drives are super quiet compared to the screw drive I used to have.
Thank you. Interesting I wonder how the sound of a belt drive compared to screw drive
@@Hindsight101 The belt drives were specifically introduced as quieter, although more expensive.
Thanks
Tech came and noticed right away that my door was sticking to the weather seal on the outside of the door. I cleaned the tacky residue off and the initial start problem was solved. I only had one spring on a double door and it was 9 years old so I had him replace and add an additional spring. He lubricated and tightened the hinge bolts but the door is still really noisy. I had already replaced the rollers to nylon. I may be thinking about insulated doors. Thanks for the help.
That’s great you got someone to come out so quickly
The other videos I looked at dident even mentioned the battery you did thanks good info 👍
Thanks for letting me know. Glad the video helped
fantastic video. love the manual pages in conjunction with the steps taken.
Your welcome glad it helped
WAAAAAY better than the instruction "bible sized" instruction booklet given. THX! This will be simple!
Thank you
Awesome video! Very detailed.
Thank you glad it helped
Thanks Derrick, video was very informative and a big help. I appreciate your taking the time to share.
Welcome thanks for watching
Good detailed instruction. thanks,
Thank you
Excellent video. We got one!
Thank you. Let me know how you like it
thank you very much for your help. Very clear I like that
I appreciate the comment thanks for watching
Thanks for sharing. Have you measured voltage and resistance on the sensor wires? You mentioned unit won't work without sensors hooked up but if one doesn't need them you should be able to fool the unit with resistor. Will find out more when I go through install soon.
It’s a safety feature but I’m should if someone tries hard enough they could bypass it
You rock Derrick!
Thank hope everything worked out
Great video. I give you 9 out of 10 stars because of how informative your video is. I deducted one star because I didn't like how you mounted the door opener. The mounting braces are typically supposed to be running in a vertical position with cross bracing if needed. I noticed the opener tweaked a slight bit at one point in the video but I guess if it works for you then that's what matters.
Thank you for the feedback
Great job Derrick. Hindsight is very appropriate because I found your installation video 2 days after I installed mine.
I have a question about the Trolley and Belt system and have not been given much help from the Chamberlain support folks.
There is a plastic cover over a portion of the Trolley which is opposite the area where the Belt attaches. The Belt rubs against that portion of the Trolley and I'm concerned that it will cause the belt to wear prematurely.
I'm curious to know if your setup shows the same thing. I have a photo showing the problem but don't see any way to post it.
Thanks again for the video and any help you or your followers may provide.
You can email me derrick@hindsight101.com or post it to my Facebook group m.facebook.com/?_rdr#!/groups/236612123674028?ref=bookmarks
I actually never notice what you were talking about until now I have the same thing it rubs up against but mines been installed for a year and I see no issues those belts are pretty tough I think they’re made out of like rubber and have some like steel in them or something so I think you’ll be good
@@Hindsight101 Thanks! I just can't understand why that plastic covered THING is there. Thanks to you I'll be able to sleep tonight :)