WE - Not that i'm aware of but they would be easy to scratch build. Just use similar sized Square Tubing from Evergreen and cut to replicate the outside legs. Use a little smaller size for the inner leg. Drill holes in the inner legs to pin through the outer legs. Add a foot and POOF fully articulated legs! Thanks. -Doug
Doug,isto é um trailer frigorífico? Eu trabalhei muitos anos em um frigorífico, eu era lombador carregava a carcaça de bois nas costas, um serviço muito muito pesado, me deixou com problemas na coluna,então este kit aí me lembra isto.
Hello Doug...just a little thing i don't understand is Moebius say that kit is in 1/25 scale but if i put the floor side to side from the AMT 40 Foot regular box trailer the Moebius its a little bit wider than the AMT'S trailer kits...just for saying i thing for me its look more 1/24 than 1/25 scale...don't know 🤔🤷♂️
France, I think there are too many variables here. The Moebius 1303 kit is a 53-foot Great Dane Smooth Side Trailer while the AMT/ERTL 40' Semi Trailers are Fruehauf Model FB Beaded Panel Trailers. Without knowing the exact dimensions of those 1:1 subjects it's easy to think that they may both be correct! Thanks for sharing -Doug
@@RightOnReplicas ok...its just because I put the 2 front end panel side by side together and the Moebius is wider than the AMT Fruehauf ...thats all..😉🙂
I really enjoy your work and presentations. I know you might find this out of context, place and time, but seeing your build, and for whatever reason, I thought how about organizing a cross World group build honouring Freedom Convoy 2022. You have a lot of contacts and am following many similar modeling channels with hopes of getting the idea out there. For me as a concerned Canadian who loves his models, Every bit helps! Thanks!
Mike, I think that's a fine idea. I'm always for promoting the hobby! -PS, please subscribe if you haven't already to help us reach more modelers! -Doug
When I built mine, the alignment pins didn’t line up right, the back two on each side were slightly off. Enough not to fit into their slots. Just enough flashing to be annoying. Other than that, it was a fun build.
The barn door rear doors have the inspection panel. That is on reefer units not usually on dry van trailers. Roll up doors can be on either dry or reefer trailers. Carefully cut the handle for retracting the landing gear so it can be folded. Handles are folded for the highway and left dangling when landing gear is down. Not often left in the ready use position to prevent yard damage or a fine for the driver if seen by the respective transportation departments.
Does anyone sell aftermarket kit to make the legs articulate it up-and-down.
WE - Not that i'm aware of but they would be easy to scratch build. Just use similar sized Square Tubing from Evergreen and cut to replicate the outside legs. Use a little smaller size for the inner leg. Drill holes in the inner legs to pin through the outer legs. Add a foot and POOF fully articulated legs! Thanks. -Doug
I love the variety of models on this channel.
Con - as numerous as the stars in the sky! -Doug
Just picked this kit and the 352 pacemaker kit up yesterday at my local hobby shop. Gonna do a slightly custom owner op theme with them
DB - Awesome dude. That's what modeling is all about. Do it your way! -Doug
Doug,isto é um trailer frigorífico? Eu trabalhei muitos anos em um frigorífico, eu era lombador carregava a carcaça de bois nas costas, um serviço muito muito pesado, me deixou com problemas na coluna,então este kit aí me lembra isto.
Hello Doug...just a little thing i don't understand is Moebius say that kit is in 1/25 scale but if i put the floor side to side from the AMT 40 Foot regular box trailer the Moebius its a little bit wider than the AMT'S trailer kits...just for saying i thing for me its look more 1/24 than 1/25 scale...don't know 🤔🤷♂️
France, I think there are too many variables here. The Moebius 1303 kit is a 53-foot Great Dane Smooth Side Trailer while the AMT/ERTL 40' Semi Trailers are Fruehauf Model FB Beaded Panel Trailers. Without knowing the exact dimensions of those 1:1 subjects it's easy to think that they may both be correct! Thanks for sharing -Doug
@@RightOnReplicas ok...its just because I put the 2 front end panel side by side together and the Moebius is wider than the AMT Fruehauf ...thats all..😉🙂
This trailer came out awesome.
Why thank you J, -Doug
I really enjoy your work and presentations. I know you might find this out of context, place and time, but seeing your build, and for whatever reason, I thought how about organizing a cross World group build honouring Freedom Convoy 2022. You have a lot of contacts and am following many similar modeling channels with hopes of getting the idea out there. For me as a concerned Canadian who loves his models, Every bit helps! Thanks!
Mike, I think that's a fine idea. I'm always for promoting the hobby! -PS, please subscribe if you haven't already to help us reach more modelers! -Doug
When I built mine, the alignment pins didn’t line up right, the back two on each side were slightly off. Enough not to fit into their slots. Just enough flashing to be annoying. Other than that, it was a fun build.
Earl, Thanks for watching and sharing! -Doug
That is a great kit looks great
Thanks MC, it was well designed! -Doug
Awesome kit Doug! Thanks bud!!
Thanks Mike, 'preciate that! -Doug
The barn door rear doors have the inspection panel. That is on reefer units not usually on dry van trailers. Roll up doors can be on either dry or reefer trailers.
Carefully cut the handle for retracting the landing gear so it can be folded. Handles are folded for the highway and left dangling when landing gear is down. Not often left in the ready use position to prevent yard damage or a fine for the driver if seen by the respective transportation departments.
CR, Thaks for the info! -Doug
Nice build, when I attempt, will do with the Mack DM in YRC livery.
Sounds great SM! -Doug