Do you know what the Ram part # is for the blank panel you drilled to install the control button? If I do Redarc I want to pull it and return the panel to original before I trade the truck.
There are too many factors at play to make a good guess. Generally speaking, you'd start out with the gain adjustment knob set around 5, then adjust up or down depending on the level of braking desired. The adjustment procedure is listed on page 4 of the instructions, which we've linked for you below: www.etrailer.com/instructions.aspx?pn=RED24FR
No programming needed. Other than the # RED24FR Tow Pro Liberty and the # 331-TPH-020 wiring harness, you won't need anything else assuming your truck is already equipped with the OEM 7-way trailer connector. www.etrailer.com/Trailer-Brake-Controller/Redarc/RED24FR.html
Awesome vid for installation. Did mine in about an hour. 2023 Ram 1500
Do you know what the Ram part # is for the blank panel you drilled to install the control button? If I do Redarc I want to pull it and return the panel to original before I trade the truck.
Sorry, we sure don't.
Any suggestions on what number to have it set at let’s say If towing a 4,000lb trailer?
There are too many factors at play to make a good guess. Generally speaking, you'd start out with the gain adjustment knob set around 5, then adjust up or down depending on the level of braking desired. The adjustment procedure is listed on page 4 of the instructions, which we've linked for you below:
www.etrailer.com/instructions.aspx?pn=RED24FR
No need for programming?
No programming needed. Other than the # RED24FR Tow Pro Liberty and the # 331-TPH-020 wiring harness, you won't need anything else assuming your truck is already equipped with the OEM 7-way trailer connector.
www.etrailer.com/Trailer-Brake-Controller/Redarc/RED24FR.html
Every single video I have watched on this controller shows nothing but installs. No video shows actual real time set up on how this thing gets set up.