I've never trusted those sequencers, I built a 12 channel out of digital relays. When you say you went to turn on through app meaning the entire system was already on?. If you don't know, the order does matter. It usually creates speaker or sub thump when components turn on or off. Could be something with the DSPs sequencer itself unless you used it in another build and know it works properly. My order is headunit starts the sequencer, sequencer than triggers the EQ up front, sequencer than triggers the active crossover in trunk, sequencer than triggers bass processor, sequencer than triggers 2 amps (4 channel first followed by sub amp). Sequencer also triggers capacitor (the ones nobody likes😂). But delivery service throwing a amp...that's not cool. Hopefully everything works out. Still yet to upgrade my system, been 4 years running effortlessly.
Appreciate the advice and the comment bro! Idk it was weird didn’t happen with the New (SAME) amp or since! I mentioned in the video, ik about pop threw speakers when turning them on without a relay but I didn’t have speakers hooked up nothing just power, ground, remote/sequencer! It don’t make sense bc I didn’t change not 1 thing, not even the sequence that the sequencers came on! I have it setup! LEDs, 4channel, then sub amp with 3 sec delay between all. I believe the amp was either damaged in shipping and/or manufacturing defect of the cap! Just sucks I had to just buy another bc couldn’t wait the time it was gunna take to see what was wrong & im sure they would’ve try to put it off on me! 🤷🏻♂️🤦🏻♂️ thanks again bro! 🫡💪🏼💯
Also what’s weird is that it still powered on (green) led, no protect, no smell just no output on speaker output! Even when I took it apart I checked the internal fuse, everything else was fine except blown cap!
@@MoToArchY crazy with blown caps it still came on when with blown internals surely should have triggered protect. That's some sort of safety, I wouldn't risk it.
@@theycallmeherbie Man i know, RIGHT!? That’s crazy I put a pic up in the video and point it out! I’m guess, from what lil research I done it was just an output cap 🤷🏻♂️ idk but the reviews on Amazon some ppl stated they lost certain output channels after like a month r so! So I really don’t know! I was hesitant getting another EXACT 1 but I built my 4channel mids and highs around that particular amp! But I mentioned the same, I wasn’t and not about to chance it, I was ready to yank ERYTHING Out! 😤😡🤬 LoL
@@MoToArchY the downtown shot where the FedEx guy was. World's longest construction project. I work in Georgetown at Toyota and I go thru Paris on the way home to avoid Lexington traffic and I75 at all costs
@@slocavkyhell yeah I appreciate you watching til the end! 🫡💪🏼💯 I didn’t know how many ppl would catch that considering I put it after the outro, kind of ah Easter egg lol! I thought it would’ve been from the trash can(Kirby) city of Paris! LoL Shows you definitely watched til the end and I appreciate that! You’re exactly right! My cousin and aunt work at Toyota and have for YEARS, now! Do you know any Lawrence’s!?
Damn bro!😳 I'd be soooo pist! Ya know tho, one of the caps probaby took a charge too fast when u connected it. And maybe it was already in rough shape cuz it was tossed? Deff sounded like a cap. And it could still work after blowing one. That one lil blue cap is literally leaning on the copper windings? Yeah thats the one. Its got a hole in the top of it lol.
Duddeee, I was! 🤬🤣 I was ready to yank it ALL out! Lmao yeah it blew from where that wound up “paper” is, but like I said in the video I’m not a amp internal expert, so I reached out to @barevids and he said pretty much the same! I love how we all support 1 another in the bass community! 🫡💪🏼💯
If you had the amp carpet it might have built up a little Static electricity that could do it
Never thought of that, thanks!
Go online and look for that capacitor in the amp
That's what's up bro
Appreciate yah boss and the support! 🫡💪🏼💯 When you going to do more videos!? How’s that rogue going!?
@@MoToArchY doing 153.7 on the. Meter
@@bassmansl9596🤯hell yeah, that’s what’s up! 🫡
I've never trusted those sequencers, I built a 12 channel out of digital relays. When you say you went to turn on through app meaning the entire system was already on?. If you don't know, the order does matter. It usually creates speaker or sub thump when components turn on or off. Could be something with the DSPs sequencer itself unless you used it in another build and know it works properly. My order is headunit starts the sequencer, sequencer than triggers the EQ up front, sequencer than triggers the active crossover in trunk, sequencer than triggers bass processor, sequencer than triggers 2 amps (4 channel first followed by sub amp). Sequencer also triggers capacitor (the ones nobody likes😂). But delivery service throwing a amp...that's not cool. Hopefully everything works out. Still yet to upgrade my system, been 4 years running effortlessly.
Appreciate the advice and the comment bro! Idk it was weird didn’t happen with the New (SAME) amp or since! I mentioned in the video, ik about pop threw speakers when turning them on without a relay but I didn’t have speakers hooked up nothing just power, ground, remote/sequencer! It don’t make sense bc I didn’t change not 1 thing, not even the sequence that the sequencers came on! I have it setup! LEDs, 4channel, then sub amp with 3 sec delay between all. I believe the amp was either damaged in shipping and/or manufacturing defect of the cap! Just sucks I had to just buy another bc couldn’t wait the time it was gunna take to see what was wrong & im sure they would’ve try to put it off on me! 🤷🏻♂️🤦🏻♂️ thanks again bro! 🫡💪🏼💯
Also what’s weird is that it still powered on (green) led, no protect, no smell just no output on speaker output! Even when I took it apart I checked the internal fuse, everything else was fine except blown cap!
@@MoToArchY crazy with blown caps it still came on when with blown internals surely should have triggered protect. That's some sort of safety, I wouldn't risk it.
@@theycallmeherbie Man i know, RIGHT!? That’s crazy I put a pic up in the video and point it out! I’m guess, from what lil research I done it was just an output cap 🤷🏻♂️ idk but the reviews on Amazon some ppl stated they lost certain output channels after like a month r so! So I really don’t know! I was hesitant getting another EXACT 1 but I built my 4channel mids and highs around that particular amp! But I mentioned the same, I wasn’t and not about to chance it, I was ready to yank ERYTHING Out! 😤😡🤬 LoL
My sequencer on my cheap prv dsp never let me down. Turns on all my amps fine for yrs 🤷♂️
That’s scary shit!
Tell me bout it! 🫣😬🤷🏻♂️🤣🤣🤣
Ah nice paris kentucky.... I live in Irvine... small world..
lol hell yeah how yk!? What gave it away lol and I have family, aunt and cousins that live in Irvine! Yeah it is!
@@MoToArchY the downtown shot where the FedEx guy was. World's longest construction project. I work in Georgetown at Toyota and I go thru Paris on the way home to avoid Lexington traffic and I75 at all costs
@@slocavkyhell yeah I appreciate you watching til the end! 🫡💪🏼💯 I didn’t know how many ppl would catch that considering I put it after the outro, kind of ah Easter egg lol! I thought it would’ve been from the trash can(Kirby) city of Paris! LoL Shows you definitely watched til the end and I appreciate that! You’re exactly right! My cousin and aunt work at Toyota and have for YEARS, now! Do you know any Lawrence’s!?
@@MoToArchY the trash can did get me pondering 🤔 lol. And I've heard of some Lawrence's don't know any personally
Damn bro!😳 I'd be soooo pist! Ya know tho, one of the caps probaby took a charge too fast when u connected it. And maybe it was already in rough shape cuz it was tossed? Deff sounded like a cap. And it could still work after blowing one. That one lil blue cap is literally leaning on the copper windings? Yeah thats the one. Its got a hole in the top of it lol.
Duddeee, I was! 🤬🤣 I was ready to yank it ALL out! Lmao yeah it blew from where that wound up “paper” is, but like I said in the video I’m not a amp internal expert, so I reached out to @barevids and he said pretty much the same! I love how we all support 1 another in the bass community! 🫡💪🏼💯
@MoToArchY hell ya! He saved my smart 3 a couple yrs ago lol.
@@1ohmwrecker Helluva guy! That’s what I’m currently running for my sub! (Big boss 3k)
nooooooo 🤯im sorry that happend to you, bro that has happended to me more than i can count ik that feeling
Yeah thanks, bro! CRAZY, bc idky it happened or what really caused it!? But I’m getting it together and it’s coming along! Thanks for the comment!🫡💪🏼💯
Cap blew in the amp
I did, but I done had it replaced and put in, check out my 3D amp rack video to see what I done, if u haven’t already! Thanks for the advice & comment
bro i just go with pioneer or alpine kenwood etc etc name brand amps.......... i smell China on this amp...
Yeah, I feel that and prob is china! I built my system around their rgb speakers and I’m ocd so I wanted it all to match! LoL🤣