EH0 реально - у меня та же причина... я не понял, у них что брак штампуют и никто не указывает им на этот недостаток пайки??? Michal Aron - ты красавчик!!! спасибо что поделился👍
Hello! I have the same problem and I don't know if yours could be fixed because maybe it was brought from America itself, but in my case nobody gives me the solution because I brought it from Spain to Ecuador, you could tell me if that has nothing to do with it and you could give me hope?
Hello. My Electrolux dryer heats but does not cool. The problem is that the laundry is hot and the water tank is empty. The compressor gets very hot. I would be grateful for any advice
@@michalaron4784 I disassembled the entire dryer and cleaned it. Unfortunately, I suspect the lack of R134a refrigerant. What is disturbing is that there was some dried oil under the compressor.
Google says: E52 indicates either a bad motor or motor controller. several articles say to access the motor and remove the power plug, and the ohms across pins 1 and 2, 1 and 3, 2 and 3 should be 4 to 6 ohms, and pins 4 and 5 should be between 105 and 130.
EH0 - indicates a problem with the power supply EH1 - Frequency of power supply out of range EH2 - Supply voltage too high EH3 - Supply voltage too low
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
muchas gracias. El mundo necesita gente como usted
Grand grand merci depuis la France , pour votre video , cela à solutionné mon problème .
I'm glad my video helped someone.
EH0 реально - у меня та же причина...
я не понял, у них что брак штампуют и никто не указывает им на этот недостаток пайки???
Michal Aron - ты красавчик!!! спасибо что поделился👍
PROBLEMS SOLVED. THANK YOU SO MUCH.
It works!! Thanks a lot for this video
Hello! I have the same problem and I don't know if yours could be fixed because maybe it was brought from America itself, but in my case nobody gives me the solution because I brought it from Spain to Ecuador, you could tell me if that has nothing to do with it and you could give me hope?
Grandee grazie ho risolto grazie al tuo video!!Stesso problema!
Ciao kilo puoi dire come hai fatto?
Hello. My Electrolux dryer heats but does not cool. The problem is that the laundry is hot and the water tank is empty. The compressor gets very hot. I would be grateful for any advice
not sure, your dryer works, no errors pops up? but no water in tank, clogged pipe from water pump ?
@@michalaron4784 I disassembled the entire dryer and cleaned it. Unfortunately, I suspect the lack of R134a refrigerant. What is disturbing is that there was some dried oil under the compressor.
Thanks! That works!
What is E 52 and how to fix
Google says: E52 indicates either a bad motor or motor controller. several articles say to access the motor and remove the power plug, and the ohms across pins 1 and 2, 1 and 3, 2 and 3 should be 4 to 6 ohms, and pins 4 and 5 should be between 105 and 130.
👍
EH1 عطل ايه يكون
EH0 - indicates a problem with the power supply
EH1 - Frequency of power supply out of range
EH2 - Supply voltage too high
EH3 - Supply voltage too low
HOLA Y QUE DEBO HACER CON ESA FUENTE DE ALIMENTACION, TIENE SOLUCIÓN ? ERROR EH0
thank you, i already fix EH0 @@michalaron4784
قع الآلة
الرججج