How to install Alisan Retrofit Switch Controller | Complete tutorial |Installation + Configuration

This video will explain you about each and every steps that are required for installation & configuration of Alisan IOT Switch controller.
These are retrofit switch controller that integrates inside switch board and make your existing switch board smart.
Once you buy our product this video will guide you about each and every step that is required for installation of our devices.
For more information: Call Toll Free: 1800-1211-300 or visit www.alisan.co.in
Installation steps:
Follow the steps below to connect your wires to the Switch Controller
Make sure to switch off all the appliances and power supply before opening the switchboard.
After opening the switchboard, identify the wire in it. The red wire is the Phase wire, black wire is the Neutral wire, and the load wire is usually yellow or blue in colour.
Now that the wires are identified, connect phase and neutral supply to positions marked P and N (P-phase and N-neutral) respectively on the device.
Remove load wire from each switch and connect it to the load terminal on the device numbered as '1' , ‘2’. Make sure that the load wire of the '1' ‘2’ appliance is replaced by virtual wire' 1' and so on.
Once finished, switch on the power supply and the device will blink blue in colour - indicating ready to configure. Test the switch to make sure it is working correctly (manual testing).
Configure switch Node with Mobile App
It is mandatory to use a Wi-Fi router to configure the device.If you are using mobile data, turn it off and switch to Wi-Fi. Ensure that you are following the steps for configuration, in the same sequence, mentioned in the operating manual.
Step 1 - Download Alisan Home Automation App. The app is available in Google Play and Apple's App Store. Create an account and log in.
Step 2 - Once logged in, set up your Home' by clicking on the 'New Home' button. If you have already created a 'Home', skip to 'Step 3' . To create a home, pick a name and location and click on 'Create Home'.
Step 3 - To set-up the switch device, Go to 'Settings + Devices' .Tap on the button Out of the products list, select ‘2 Switch' and tap on 'Next'.
Step 4 - Ensure that the mobile data is disconnected. When connected with your Wi-Fi, go to Wi-Fi settings and find the device Wi-Fi - 'SW_2 **', In the list of Wi-Fi networks. Return to the app and click on the checkbox 'Connected to SW_2*** and tap on Next.
Step5 -Once the device Wi-Fi is connected, you will get a list of available Wi-Fi networks you can connect with to complete the configuration. Select your Wi-Fi and enter the password to finish the configuration process.
Final Step - As soon as the device connects, you will see a notification Configuration Successful - Tap ( Next to proceed'. Once you tap on 'Next', you get an option 'Assign to a room' where you add the device to a particular room (where the device is located). Also, you get an option to 'Name your Device', then click on 'Create Device'.
After you create the device, you get a notification Successful - Your device is added to the home, Go to switches tab to start using switches.

[@michaeldavid1340]

Sir I am interested in pune available

[@angadbelurkar9291]

It required internet or not

[@alisansmarthomes]

It requires internet sir