I was descaling my Saeco exprelia and came back the power was off. Now it wont turn on at all. Is there a similar issue with the exprelia transformer, or something on the PCB? I can get a powerboard replacement for a decent price, maybe i should just swap the whole thing?
Hi Milen, I have power to the board (JP13 and TR1) of my Magic Deluxe (118v) with the door switch closed, but no lights. How can I test to see if the transformer has failed without removing it?
Hello everyone, i have saeco initelia espresso machine everything was working properly but i went for business trip and when i came back i couldn't turn on my machine so i disassemble the machine i checked brew unit motor and its working fine but machine was still doesnt work i dis connected pump grinder to see if it would turn on it didn't turn on but when i accidentally touch the electronic board it shocked me so there was electric on the board but i couldnt find the issue could it be the transformer on the board if you reply i would be very happy
I have saeco royal and it throws the safety when I connected to the power, it started, and it shows a "locked group" error. it doesn't stop from the bottom button or from the door switch ... what market is the electronic board?
Hi there, i like your videos and i already subscrive. my Saeco vienna have all lights on at the same time both also the greens and the red one. do you know what componente can make this error because the machine dont works too? thanks right now!
Hi there, I was messing around with my Saeco caffe buono in test mode, tried to test the heater (boiler) - water knowb to mid -12- , holding coffee button for 10-20 seconds and the power went down completely. I cannot start the expressor anymore. Does anyone have a clue on what could break?
I was descaling my Saeco exprelia and came back the power was off. Now it wont turn on at all. Is there a similar issue with the exprelia transformer, or something on the PCB? I can get a powerboard replacement for a decent price, maybe i should just swap the whole thing?
Hi Milen, I have power to the board (JP13 and TR1) of my Magic Deluxe (118v) with the door switch closed, but no lights. How can I test to see if the transformer has failed without removing it?
Hello everyone, i have saeco initelia espresso machine everything was working properly but i went for business trip and when i came back i couldn't turn on my machine so i disassemble the machine i checked brew unit motor and its working fine but machine was still doesnt work i dis connected pump grinder to see if it would turn on it didn't turn on but when i accidentally touch the electronic board it shocked me so there was electric on the board but i couldnt find the issue could it be the transformer on the board if you reply i would be very happy
I have saeco royal and it throws the safety when I connected to the power, it started, and it shows a "locked group" error. it doesn't stop from the bottom button or from the door switch ... what market is the electronic board?
Hi where can i buy the transformer from?
can u show how to check all parts on electronic board ?
Hi do you know why a saeco royale exclusive says ventilate and will not change even after I let the water out of the steam nozzle?
Limpar contador volumetrico.
sir what if all the parts are replaced but the grinder still does not work?
Hi there, i like your videos and i already subscrive. my Saeco vienna have all lights on at the same time both also the greens and the red one. do you know what componente can make this error because the machine dont works too? thanks right now!
Hi there, I was messing around with my Saeco caffe buono in test mode, tried to test the heater (boiler) - water knowb to mid -12- , holding coffee button for 10-20 seconds and the power went down completely. I cannot start the expressor anymore. Does anyone have a clue on what could break?
Ami solo me sale un baras no se porq 😊
merci
Saeco via Vittorio Veneto