Bricklaying Basics Should you hit your level?? laying 4 bricks
HTML-код
- Опубликовано: 12 июн 2024
- how to lay 4 bricks and level them,
learn how to lay brick with bricklaying courses available at bb academy wigan
visit www.bestbricky.com
Join as a channel member for, loyalty badges at the side of your name in the comments. / @stucrompton1
SUBSCRIBE FREE HERE : ruclips.net/user/stucromp...
Bricklayers talk group facebook
/ 381770512162719
NEW MERCH STORE HERE :
streamlabs.com/stucromptonuk/...
LEARN TO LAY BRICK WITH ME HERE
VISIT : bestbricky.com
any donations welcome in appreciation for my content here : www.paypal.me/stucrompton
Twitter: stucrompton
Facebook: stucromptonyoutube
Instagram: stucrompton
SnapChat: stucrompton
live streaming
Periscope: stucrompton
Blab: stucrompton
Meerkat: stucrompton
Music from www.epidemicsound.com
Business: stucrompton@ymail.com
Thanks for watching! - Развлечения
Absolutely for the reason you just demonstrated: tapping the level imparts force along all the bricks at once, bringing them to level. It's not like you're hammering that level, they're designed for being knocked and dropped around. If anyone is worried about damaging their level, first make sure it's a stabila, and just replace it every few months as part of the job. I'd argue that the rule of tapping the brick and not the level is antiquated at the very least, if not wrong.
yes aj and stabile just brought out an impact protecter so they encourage hitting level, they know its part of the job
Хуя ты умный😉
Just tap it, stabila levels are good enough for it. Most of the stuff you learn in college don't work in a real working environment anyway. It's just a good starting point. Subscribed
Hi Stu, spot on mate I always tap the level with my trowel handle , I had a client tell me years ago he had been on a course for bricklaying and I was doing it wrong ! I asked him if he still fed the steering wheel through his hands when he drove around a corner , he said of course not , I rest my case then ha ha , also he put a shed base in for me to build a shed workshop and he was 10 inches out of level in 10 foot ! Ha ha muppets ! Love em .Mike from Spain .
lol mike funny story buddy
As a Diyer this type of vid is very useful , ta Stu
Wow, that’s some slope on the pad..maybe he didn’t want water to collect 🤣🤣🤣🤣🤣
👍🏻Increases productivity and therefore profits if you price by the job; increases accuracy and therefore referrals for sharp work. Even if tapping does hurt the level (which it appears it wouldn’t) you could probably buy a new level every month with the business. Love your work Stu!🤛🏻
Good honest approach! Most guys are told not to tap the level but everyone on site does. Keep these vids coming!
Been bricklaying over 40years nothing wrong with tapping the level.
I need to get myself a decent level for this reason. Like you mentioned, a video about different types of level would be great 👌🏻
Going to do one tomorrow on levels Robin
Stu, I watch so many of your brilliant videos (old and new). As well as an expert builder, you truly are an amazing Tutor with great attention to detail - which suits absolute beginners (like me) to advanced, with brilliant tips, guidance and camera angles along the way. THANK YOU SO MUCH FOR SHARING. Much Appreciated mate. 👋👋👋👋👋
Thank you for this demonstration.
Excellent job!
Stabila make a masons level designed with protective strips for tapping level :-)
Hi
U can buy the strips for most levels now
Thanks stu. I am self taught with brickwork nowhere near as good as you but i do learn a great deal from your videos. Thanks
I was gonna say Stabilas are my favourite levels and then I've realised you're using one too! Greetings from Germany
Agreed. Gotta yap the level. Loved that you stressed with the butt of the trowel not the blade. Great video! Keep it up bro!! Respect from USA 🇺🇸🇺🇸
That’s what I got taught in level one in college is that tapping on the side of the brick but I never done it I just hit the level makes life so much easier also I’ve been watching your vids for a while and you’ve made me improve in my work so much thanks so much
Nice to know I could help budd
Legend
Hi Stu, I wish I could give this 100 thumbs up. I recently did a bricklaying course and everyone mentioned, don't hit the level, but tapping each brick is slow, and you end up having to redo half of them. Waste of time. Much faster and more accurate to tap the level. I understand not to hit it too hard, but a few quick taps made things much easier.
Yes stu very true! I’ve always tapped my level it’s just so much better, quicker, and easier
Another great video keep up the good work mate 😁👍
So true if you are looking for tips this is spot on, when I was at college it was "DO NOT HIT THE LEVEL" it was BS. Just get a good 4 foot level. Great advice.
Thanks for sharing your experience.
Great video Stu ! Love watching your skills! !!☺👍
Built a 10ft by 5ft raised fish pond with big breeze blocks then layed reclaimed brich all around thanks to watching you for the past couple of years now stu.. I thank you kindly. All the best mate you deserve this opportunity /break bro👌👍
Brilliant demonstrations, cheers for this
I think that "don't tap your level" came from the old days when levels were made of wood and were more easily damaged. You are not going to damage a high quality metal level with a slight tap from a wooden or plastic trowel handle.
Absolutely brilliant video. I watched it on my TV as its better to learn. I can scroll back and reassure Ive sussed it. Thank you as always Stu you are brilliant!
Another fantastic video stu pal.well done and keep up the good work 😁😁😁😁
Thanks for the video mate. Very useful
I havent been taught to use a gauge brick, this small change will make my life a lot easier i think
Lots of respect to u stu for taking the time and showing us the basics of Bricklaying .
Could u please go through how to lay block on uneven ground on concrete at below ground level
Thanks for showing the examples
hi stu...you are very good teacher for everyone ..easy to understand and your videos are just great... greetings from Germany 👌👍😀
Great to know that I’m understood from Germany thank you. 👍👍
Makes perfect sense stu great sensible video all the best
Makes sense to tap the level. Nice one Stu. 👍🏾
Nothing wrong with tapping the level. If your a half decent trowel they’ll be close when you put them in so it’ll only require some light tapping. Hitting the bricks with the blade can also chip or break them. Only thing is you tend to cover the level in muck when you tap it.
I did exactly this today on my 16' x 10' first course and found it the easiest way to level the bricks, i used the 4' level and the 6' level and yes your bang on the mortar needs to be soft enough, my brickwork was for a greenhouse base 7 course high. thx for re confirming that i was doing the right thing, it made sense to me to hit the level to get a row of 6 or more brick leveled quickly.
Thanks for sharing your experience.
My block wall was as crooked as a dog's hind legs so I need help for sure.
Blessings and more Blessings
You am a top tappa mate !! Keep tap tap tapping
Makes sense to me stu.
Great video yet again.
Nice one Stu have always tapped the level your explanation was spot on the tip tap of the bricks drives you round the bend and that beam level you use would take some bending, side ways yes it would bend if you stood on it but the levelling edges very strong like an RSJ, tap the level and save the brick, great tip Stu hope things are going to plan
I'm on my first week of my bricklaying course and I have already realised that tapping the bricks makes it uneven from one side. I suppose if you are an experienced bricklayer then it ain't a problem.
Thanks stu quick and easy👍😁
The walking stick foot on a trowel handle is what I do. 👍🏻
Great video and great information
I have the same stabila level with the guards built in. 15 year's at it and this is the best I've had I usually slap it with the palm of the trowel it works perfectly fine 👌
The newer stabila levels are made with a dead blow that are made specifically for tapping with your trowel they have a plastic bumper on one side , 1 of the best levels
Just started laying bricks last year when I started my business the level being a straight tool.its been great for me do want to learn more to get better I also find the pic and dip method better than continuous
Interesting video 👍 👍same among all trades, with textbook theories and what's practical. I prefer practical... keep tapping Stu 👏👏
A friend of mine builds pillars by putting on around 5 courses without plumbing at all then plumbs it by hitting his level with a lump hammer till he's happy tbf looks fine when he done but I never worry about tapping my level with a trowel after seeing that 😂😂😂
Absolutely makes sense to me.
same way on setting beads for render / plaster no harm on tapping it
Hi Stu, watching some brickies🤔 on a site in Preston today, they never used a level😳😂 all free hand, and rack o eye.
Stu please do a video on keeping bond when laying.🙂 everybody loves even perps. Cheers mate
Put the level on the front edge (face edge )and tap bricks in the middle in the middle , simple .
By the way, I really enjoy all your vids and, for what it’s worth, learning bucketloads 👍
These levels can take a hammering best thing I ever bought 👌
Easiest and fastest way ,every single bricklayer I've ever known taps the level👍
This is a good bit of advice to use your tools wisely.. for better results with less effort
I'm not a bricky but when I did a small diy job I used the level method.
Good work Jay P
Hi Mate. Might go back to b4 Marshaltown, when trowels could cut bricks, and they had a steel rivet to the ferule handle end, and maybe levels we not as good. Makes sense. Another tip I've given learners is to turn the level, this shows the high spot if doing it that way. Great to see you taking pride pal.
thank u for the advice, but what about the straightness of the bricks? they could be going left or right
Thank you
Hi Stu. Ye! we where all thought the same. But levels can take a bit of a hit dropped mine off scaffold and after accurate checks it was perfect. But another way i was shown and it has worked best for me down the years. Lay 1st brick then level 4th and with 2 level points lay the the 2 between by eye always slightly up between them then place level on top a slight tap in middle and your done. This method after time trains the eye so good you only put your level on top to confirm your accuracy.
Хороший комментарий, так делают печники в России
Great video 👍 question- how deep do you make your footer? Is there a general rule for footers - like 5 ft wall , use 5 inch footer, or 10 ft wall, use 10 inch footer.
Good stu
My lecturer at college stressed the fact that you should never hit your level but as you said Stu as long as your not bashing it with a lumpy then it shouldn't throw your viles out-especially with Zzz German Stabillas!!! 😉👍
You can also put a crutch foot on the end of your trowels handel.
Just makes sense to tap the level.
But it is only a suggestion from a subscriber who admires your work and who has followed you for several years, greetings!
Hi stu do you ever use the stabila girder level as that type of level is little more heavier then the ordinary box type level.
spot on stu, well explained.
Nice one Paul
Fantastic video as always, random one but what make are the boots you have on, look solid boots them
ambler boots callum
Thanks for the upload, I think the majority of time is personal preference to the Bricklayer, when I was in college I was taught not to tap the Level, why? the reasoning them days in the early 90's spirit levels were not robust enough to take a stool end of a trowel especially being an apprentice just couldn't afford to replace my box section Rabone level. I tell the students in college not to hit the Level that way I was taught, but what I say with modern levels which are better made there is no harm, like you have demonstrated in tapping the level with the stool end of the trowel, however tell my students the importance of looking after the spirit level, and that its bad practice to see trowel mark on the spirit level through hitting it with the metal part of the trowel.
Cane bumper on handle of trowel is mandatory for me. Then you never hear tink tink tink... I'm a big fan of crick levels, I've never used a metal level for masonry. Nice video👍
Makes perfect sense to me. But how would you level up heavy blocks, where there is more mass to move around.
good thinking
Could depend if your on time work or a price 😂😂 just makes sense to tap the level
Bang on stu, I always tap the level, saves time and is the easiest and best way to do it. Just don't twat it 😂. Good video 👍
Haha so no sledge hammer then ! 🤠👷♂️
@@topcatcoolio8807 never tried it. Try it out and let me know the results 😂
Excellent point Stu. You should work with hardware vendors to design a level designed to take some impact specifically for levelling brick work.
if i ever come into some real money i will definately work on some of my own product as i have a few ideas
As long as the motor is soft as you point out, I was just asking as a mere motol
Yeap I tap level! I use a wood handle trowel, and I use a rubber cap/bumper on the end. Stabila is a very accurate level too!
Stabila makes a Mason's level specifically for this. They make a 24 and 48 in level with a strike pad. It's made to hit with the trowel.
Great advice.
Now, would a square level as wide as a brick be event better?
I always tap my lev best way
Was working with an experienced Bricklayer who had already done few courses and when I worked with him , My laying was bang on but because of lack of experience the work ethic wasn't great but I did okay but when I did it on my own from first course it was a Flippin nightmare. The type of day where u feel like leaving the job because for one u are annoyed with your self and obviously the employers not happy with your work ethic
Stu, after setting the corner brick do brickies consciously lay the next 3 ever so slightly high to facilitate "knocking down" to the level of the gauged brick?
Straight outta crompton folks
Trying out the new level Stu
oh aye mate its a belter! you need one for your wall
Think I need a new back first 😂🤣
Lol mate, sleep well then ha you will be reet lee you’re out the trenches now on to the finale
Please how do you correct levelling brick if the floor is slightly uneven?
Hi stu where do u buy your work boots?
Makes sense to me and I'm just a thick plumber ! 🤔
Can you give me some info regarding the course plz thanks
Стју Кромптон је озбиљно ушао у наш живот.Врло позитиван лик!
From Egypt..... I like this..... Sorry.. Dont speak english
@stu crompton what are you using for a practice mortar mix? Are you able to break it down and reuse it when you’re done with the project?
Yeah as long as you don’t let it dry fully. Sand and hydrated lime
I rarely ever strike my level with my trowel. The only time that I do is when there is only a tiny amount of adjustment needed. All other times I use my hand on the level. I feel that it is less likely to damage it and it stays cleaner. That being said I have bent cheap levels with my hand.
In Tec in the 1970 had wooden level ,it was level one brick at a time and never hit level
In college it's pretty easy but In real life it could be a whole different story because of the awkwardness(work conditions) confined spaces , uneven ground etc
I have a habit of using a long plasterers straight edge and sitting the level on it and tamping the straight edge with a rubber mallet. I hate hearing tap tap tap.
Wouldbe nice if trowels had a rubber end as a tamper.
Not a bricky , but I’ve got 2 of the old school stabilla bricky beam type levels that must be 20 odd years old and a 6ft stabilla box level similar age , they’ve been knocked about on site all that time ,dropped stood on ect - I checked them all last week against a brand new stabilla and they were all still reading level and plumb , the green vials are now clear on all , but goes to show a decent level can take a life on site
Are you using a plasticizer and very fine sand for your training mortar? Your mortar is the most beautifully plastic mortar I have ever seen. I make my training mortar with 3 parts sand to 1 part hydrated lime; I cant find plasticizers here in the States.
Stabila are the best, and are lifetime investment, they won’t let you down! I’ve sent a few back to factory to get calibrated and they sent me entirely new level! You can’t just abuse them but if you find the bubbles don’t agree they will make it right. Worth every penny!
Put the level on then tap the bricks.👍. I think😬😬
I did ur way in my collage and people say it's wrong but I know it's right
yes ben they may say that because its the colleges level, i should say wait till you have your own level before you tap it