GGF is on a different level! An expert builder! The level and thought that goes into his build is like nothing else I've seen before on YT! His builds are always so clean and so well put together. Synergy to the max. Love it! Wish he could build me a system. Always fun to watch and educational! Showing people how it's suppose te be done.
love this build. i reckon its size doesn't come across well on camera, its such an awesome little build and probably one of my favorites that you have done. that handle is perfect for it. very OEM sorta look
I knew I'd seen this build before! ;-) Love these in-depth making-of vids, especially when there's a fair bit of component selection considerations or modding involved.
Kind of misleading mentioning the Barrow pump/block since T03's CPU cooler clearance is 56mm on paper while the height of the said component is 64.10mm (and this is without the fittings on the in/out ports). I'm pointing it out just because I also have the T03 and really really wanted to get the Barrow pump/block. Currently running Alphacool Eisbaer LT Solo and am not very happy with it. Other than that, I love your build and how clean it is. This was my first PC build and made a lot of mistakes. I purchased a TUF3080 with a Bykski 3080/3090 block and was not aware that the PCB is much taller with the TUF cards. Almost had to start from scratch again but I managed to fit it with a flat terminal (it has 6 ports!), though it is a bit longer than where the panel should be so I used 10mm standoffs where the panel screws into - not bad looking.
Awesome, always hoped you would get into SFF. Regarding the Meshilicious, I know you wanted to do a cpu only build w/ a 3090 but I'd love your take on a dual rad set up for a full custom loop. I always appreciate the creative solutions on this channel. Maybe a 120/140 where the 3.5" drives would be or a mod to slap a 280 rad on the side panel, idk lol.
I love your work but I would love to know where to go to learn how you set up your custom displays in your cases that show the temps etc. Also want to know how I can set it up so that it is configured on boot if possible or would I have to manually set it up each time I boot the machine?
*How do you set up that display? Is it just another small monitor (with a temp app set to run on windows startup?) and plugged into the gpu? You did something similar in the P120 Crystal build and I've been trying to figure it out since I also have the P120 Crystal case.*
The block says it's 20 series compatible, but unless I've been completely wrong about the 1660Ti and 2060 being identical PCBs, I'm eyeing my board and I'm suspicious. The PCI-E power looks just way too far in to fit.
I click thumbs up before 2 seconds in a video. The confidence I have in this channel is unwavering.
GGF is on a different level! An expert builder! The level and thought that goes into his build is like nothing else I've seen before on YT! His builds are always so clean and so well put together. Synergy to the max. Love it! Wish he could build me a system. Always fun to watch and educational! Showing people how it's suppose te be done.
Thank you
I love SFF. You do amazing work. I look forward to more SFF content. Your work is always amazing.
One of my favorites you’ve done.
Great Job, i love this build. Cant wait to see more SFF Builds from you
Thanks for the SFF! I'm researching how to make mine and this helps
I really love the new backdrop.
Awesome build! Love the SFF builds.
Stellar build. More SFF builds pls!
Awesome build as always!
This is an awesome build! I would love for you to build in a FormD T1 with this much information (what you used, why you used it, etc)!
Super clean looking. I love it!
Thank you for telling the website where you get those cool PC cases!
love this build. i reckon its size doesn't come across well on camera, its such an awesome little build and probably one of my favorites that you have done. that handle is perfect for it. very OEM sorta look
Insane Build mate !
Looks real nice, also SF-Builds ftw :D
I knew I'd seen this build before! ;-)
Love these in-depth making-of vids, especially when there's a fair bit of component selection considerations or modding involved.
Love all your builds but this one rivals the Destroyer (o11 dynamic mini build) for sure. Keep them coming.
Kind of misleading mentioning the Barrow pump/block since T03's CPU cooler clearance is 56mm on paper while the height of the said component is 64.10mm (and this is without the fittings on the in/out ports). I'm pointing it out just because I also have the T03 and really really wanted to get the Barrow pump/block. Currently running Alphacool Eisbaer LT Solo and am not very happy with it. Other than that, I love your build and how clean it is. This was my first PC build and made a lot of mistakes. I purchased a TUF3080 with a Bykski 3080/3090 block and was not aware that the PCB is much taller with the TUF cards. Almost had to start from scratch again but I managed to fit it with a flat terminal (it has 6 ports!), though it is a bit longer than where the panel should be so I used 10mm standoffs where the panel screws into - not bad looking.
You need some rest my brother
Very pretty and capable!
great my firend .from iran👍👍
Can you please do a build with Z490 Xtreme Waterforce?
dang what cleanliness!
you don't have water temps available?
Sorry I dont
Awesome, always hoped you would get into SFF. Regarding the Meshilicious, I know you wanted to do a cpu only build w/ a 3090 but I'd love your take on a dual rad set up for a full custom loop. I always appreciate the creative solutions on this channel. Maybe a 120/140 where the 3.5" drives would be or a mod to slap a 280 rad on the side panel, idk lol.
Wau, excellent work
I love your work but I would love to know where to go to learn how you set up your custom displays in your cases that show the temps etc. Also want to know how I can set it up so that it is configured on boot if possible or would I have to manually set it up each time I boot the machine?
id recommend building something in the sm580
Is that the new set ? I love it, the build is beatiful
music from 7:06 ?
Can you add wich color or how to get that coolant color guide )
Craftsman!!
Are you using a pump/fan controller for the two pumps and fans as I’m looking to do something similar.
Anyway to make this work with 3000 series cards, especially with that new EK waterblock for them
3080 fe card would work with ek block. Just have to be careful of temps with a 240mm rad.
*How do you set up that display? Is it just another small monitor (with a temp app set to run on windows startup?) and plugged into the gpu? You did something similar in the P120 Crystal build and I've been trying to figure it out since I also have the P120 Crystal case.*
Do you think the 240mm radiator can handle stock 5900x and 1 rtx 2080 super
Good job)) They watch you in Russia!
What coolant have you used ?
👌😍
Please build thermaltake core p8
The block says it's 20 series compatible, but unless I've been completely wrong about the 1660Ti and 2060 being identical PCBs, I'm eyeing my board and I'm suspicious. The PCI-E power looks just way too far in to fit.
if only the case could be made a little taller, then you could fit a second radiator on the bottom to allow for more powerful hardware!
It would be too big then. It's only a 10L chassis
孙总牌面啊！
First
second
That's one sweet build. So clean 😎👍