Really like the care that you put into this video. Not everyone take the time to go over the installation of connections like you did. That is my biggest pet peeve and you nailed it. You earned a new sub. It has been fun learning how to upgrade this MacBook. I'm showing her a lot of love. Installed 16 GB of ram, new battery, cloned hdd to 1 TB SSD. Practically rebuilt it. I have been noticing my fan coming on.
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! i'm glad that you got the laptop serviced and upgraded, enjoy it now 🍻 Should you have any questions or requests in the future, please don't hesitate to ask me.
absolutely the best instructional video I have seen... thanks so much.. the right way to disconnect and reconnect the wire connections is so important and your camera work is top notch.
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.
thank you for making this video, i went to a tech store and they wanted to charge me $100 for this service which is absurd. i came to youtube to find a solution and your video was very helpful. thanks!
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P that's why i do this videos to save time and money for people and they can enjoy from outcome too :) Should you have any questions or requests in the future, please don't hesitate to ask me. cheers🍻
Your video is easily the best step by step video for this model Macbook Pro. Thanks for making this video it helped me a lot with disassembly and cleaning.
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P i always try to show in detail of steps. if you have any question or request in the future feel free to ask me.
It's my pleasure my friend. 😊 AWESOME JOB AND RESULTS! Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.
TYSM for this video! It all worked flawlessly and my MBP is running better now! A little tip for the tricky keyboard cable I found helpful: I was also having problems to get it in and found that if you taker a long (5 cm or so) piece of not too sticky isolation tape and tape it to the cable once you put the tip of it into the socket, you can very easily "pull" it into the socket, using the tape as something to hold onto. Afterward you can carefully pull the tape off by pulling it at a very sharp angle. Do so at your own risk, but for me it worked very well, because I felt I was damaging the cable using tweezers or my fingers. EDIT: just realized that someone already commented that technique
Thanks for your feedback! If you want to help the channel, you can either like the video, subscribe to the channel, or do both! About the tip you shared, it's really good, and I'll use it in my future videos. I appreciate your suggestion, and I'm happy to assist and support people with their services and improvements. If you have more questions or requests later on, feel free to ask. I'm here to help!
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P i do try to keep up and learn ways to bring better quality video / audio, Should you have any questions or requests in the future, please don't hesitate to ask me.
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! I'm glad my videos are helping!🫠💞 Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, absolutely not my friend they are not required to be placed. Should you have any further questions or requests in the future, please don't hesitate to ask me.
that plastic is part of the battery or something some corner plastic, but for me is very hard to say what part is. but it is safe to say that it is a plastic and any broken plastic in the re is not important.
You are welcome! Glad you liked it and helped you repaste it all by your self 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.
Hi. Sometimes the heat sink pipe has a barcode sticker that can stick to the layer underneath which covers the keyboard backlight. In my case I ended up ripping the layer below slightly while attempting to lift the logic board, but it shoudn't be that big of a deal
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.
hyy may i ask something i have a model of this laptop but i havent use it for a long time so it doesn’t really open up. where can i send it for a service or they just dont service this type of model anymore?
Hello! After doing this my LED backlight does not work, i have tried resetting SMC and taking off the backlight cable and putting it back. Still no result Any suggestions?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: its not with software or SMC, something is wrong with connector or the flex cable, make sure its inserted all the way inside the jack.
You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request feel free to ask my anytime my friend :)
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. cheers🍻
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P awesome there is always some techniques that you can learn by doing it your self :P If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.
Really like the care that you put into this video. Not everyone take the time to go over the installation of connections like you did. That is my biggest pet peeve and you nailed it. You earned a new sub. It has been fun learning how to upgrade this MacBook. I'm showing her a lot of love. Installed 16 GB of ram, new battery, cloned hdd to 1 TB SSD. Practically rebuilt it. I have been noticing my fan coming on.
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback!
i'm glad that you got the laptop serviced and upgraded, enjoy it now 🍻
Should you have any questions or requests in the future, please don't hesitate to ask me.
absolutely the best instructional video I have seen... thanks so much.. the right way to disconnect and reconnect the wire connections is so important and your camera work is top notch.
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
thank you for making this video, i went to a tech store and they wanted to charge me $100 for this service which is absurd. i came to youtube to find a solution and your video was very helpful. thanks!
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
that's why i do this videos to save time and money for people and they can enjoy from outcome too :)
Should you have any questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Your video is easily the best step by step video for this model Macbook Pro. Thanks for making this video it helped me a lot with disassembly and cleaning.
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
i always try to show in detail of steps.
if you have any question or request in the future feel free to ask me.
Some cable are a hard job, but it seems to work all. Really good video, thank you. Now 54 C. Before it was 84 C.
Thank you again.
It's my pleasure my friend. 😊 AWESOME JOB AND RESULTS!
Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
Should you have any further questions or requests in the future, please don't hesitate to ask me.
Just finished my thermal paste maintenance here, your video was very usefull. Thank you very much.
Thank you for your feedback! We appreciate your support for the channel.
cheers🍻
TYSM for this video! It all worked flawlessly and my MBP is running better now! A little tip for the tricky keyboard cable I found helpful: I was also having problems to get it in and found that if you taker a long (5 cm or so) piece of not too sticky isolation tape and tape it to the cable once you put the tip of it into the socket, you can very easily "pull" it into the socket, using the tape as something to hold onto. Afterward you can carefully pull the tape off by pulling it at a very sharp angle. Do so at your own risk, but for me it worked very well, because I felt I was damaging the cable using tweezers or my fingers. EDIT: just realized that someone already commented that technique
Thanks for your feedback! If you want to help the channel, you can either like the video, subscribe to the channel, or do both!
About the tip you shared, it's really good, and I'll use it in my future videos. I appreciate your suggestion, and I'm happy to assist and support people with their services and improvements.
If you have more questions or requests later on, feel free to ask. I'm here to help!
Thank you very much now i am confident to open up my macbook pro video saved
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
i do try to keep up and learn ways to bring better quality video / audio,
Should you have any questions or requests in the future, please don't hesitate to ask me.
@@uFixTek no need to ask bro i liked it when i watched it for the first time
much appreciate the awesome support brother 🍻
Very helpful guide, help me a lot. thank u!!
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
thanks for the tutorial, I just change de thermal paste and put 16 gb of ram.
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both!
I'm glad my videos are helping!🫠💞
Should you have any questions or requests in the future, please don't hesitate to ask me.
🍻cheers
Thanks, with your help my idle temps went from 60-72C to 40-45C -- those little pieces of tape-- were those necessary to put back?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, absolutely not my friend they are not required to be placed.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
@@uFixTek thanks. Also, a random piece broke off.. do you have an email I can send an image to, to get your help with finding where it came from?
sure send it here: ask@ufixtek.com
or send me here the pic via link , use this site: imgur.com/
you don't need an account to use it.
@@uFixTek thanks, email sent
that plastic is part of the battery or something some corner plastic, but for me is very hard to say what part is. but it is safe to say that it is a plastic and any broken plastic in the re is not important.
Thanks 👍😊
Helped me fix my MacBook all by myself
I'm grateful 🥰💓
You are welcome! Glad you liked it and helped you repaste it all by your self 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
Hi. Sometimes the heat sink pipe has a barcode sticker that can stick to the layer underneath which covers the keyboard backlight. In my case I ended up ripping the layer below slightly while attempting to lift the logic board, but it shoudn't be that big of a deal
no need to worry it is absolutely fine.
this happens often.
Thank you for the video. Keyboard flex cable was the bugger. Dropped my working CPU temp by 6 C.
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both!
Should you have any questions or requests in the future, please don't hesitate to ask me.
🍻cheers
thanks very helpful guide I want to try soon
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
hyy may i ask something i have a model of this laptop but i havent use it for a long time so it doesn’t really open up. where can i send it for a service or they just dont service this type of model anymore?
it all depends where you live and what repair shop you have around you, most repair shop do take them and service it.
@@uFixTek does it cost a lot to repair?
it would cost anywhere from 30-60usd i would say
Hello! After doing this my LED backlight does not work, i have tried resetting SMC and taking off the backlight cable and putting it back. Still no result
Any suggestions?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: its not with software or SMC, something is wrong with connector or the flex cable, make sure its inserted all the way inside the jack.
thanks!
You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request feel free to ask my anytime my friend :)
Awesome
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
Should you have any questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Thanks! 🤓
The keyboard connector was difficult to reattach. I used a piece of tape to guide it in. 👍
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
awesome there is always some techniques that you can learn by doing it your self :P
If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.
Thanks, very helpful tutorial!
You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.