Seekins SP10 First Match...The Good, The Bad, And The Ugly
HTML-код
- Опубликовано: 11 июл 2024
- VIEW MY PLAYLISTS BELOW!! Hi everyone! Shot my first match with my new Seekins and thought I'd share some good, bad and ugly with you...Enjoy!
00:00 Intro
00:32 The Bad
04:07 The Good
06:01 The Ugly
10:56 Final Thoughts
Optics Reviews - • Optics Reviews
PRS Practice - • PRS Practice Videos
PRS 22LR - • 22 LR
PRS Centerfire - • PRS Centerfire Rifles
Reloading - • Reloading Videos
PRS Accessories - • PRS Accessories
3-Gun Series - • 3-Gun Series
Non-PRS Pistol/Rifle Reviews - • Non-PRS Pistol and Rif...
Match Videos - • Match Videos
=========================================================
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RUclips channel (The 4GunGuy).
Any reloading data supplied on this RUclips channel (The 4GunGuy) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RUclips channel (The 4GunGuy) or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
The 4GunGuy can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RUclips channel (The 4GunGuy) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RUclips channel (The 4GunGuy) or in this video. 
Спорт
Thanks
Sounds like a lot of fun. I shoot local benchrest comps on occasion with 6ARC poverty pony gasser just for fun. I like loading my own ammo. I use holds from 100-1000yds no dialing (except maybe a tad for wind) it is zeroed at 600.
Great video! Always enjoy you sharing your experience.
Thanks Fattigla! This is a very humbling sport for sure...Just when you think you have everything tuned and running great, wham! Thanks for watching my friend!
Great recap and review of the rifle. I’m thinking of getting into PRS as well and the SP10 is my #1 consideration for purchase.
Hi Jordan! You'll love it. I'll recommend getting the upgrades that I did like the easy to tune gas block...It was so easy to adjust during that match. Hope you enjoy yours if you get one, and thanks for watching my friend!
Good info as always. Glad you got things figured out. I think i'm gonna shoot the 6arc this weekend here at the Riflesonly Brawl. We'll see.
Let me know how it shoots for you GMG and thanks for watching another one my friend!
I got the MPA dn5 on t tikka t3 and man that muzzle kicks like a wild horse. Plan on trying the area 419 sidewinder
Hi Project! I ditched the DN5 because it wouldn't stay on the rifle. I should have stuck with the Area 419 Hellfire Match, which I love now on both this rifle and my BRA. Thanks for watching my friend!
Too few videos out there, explaining how a gun worked out during an event. Greatly appreciate this report
Thank you Dimitri and thanks for watching my friend!
I've built a few 6GT LR308's they are just a perfect combo for semi auto PRS. Would you entertain having a 25GT custom build made?
Hi EagleEye! I'd love to look at a 6GT, but honestly, when I look at the cost of purchasing the reloading supplies (dies, etc...) I don't want to spend the money to only shoot it occasionally. Thanks very much for asking though, and thanks for watching another one my friend!
@The4GunGuy but you bought a seekins lol. I understand, however, 6.5CM in that platform is not a good option. COAL cannot be optimized and keep mag length.
@@EagleEyeShooting I agree, but I had all the 6.5 CM dies, etc...So it was a cheaper option to even see if I'd like a gas gun for prs. I was actually surprised at the minimal recoil and the accuracy at the match, and most importantly, I had a blast with it. I gotten in shooting like I got in golf, just enjoying myself, knowing I'll never be a scratch golfer.
Great video. Congratulations on the win. Thoughts on a AR15 chambered in 223 shooting in gas and tac division in prs?
Hi CJ! Some guys are shooting .223, but in bolt gun due to better handling and higher velocity...They are very accurate. But one thing to note is be ready to not have impacts called due to less force on impact out at distance. In some matches, I've seen spotters not call impacts simply because that 1.5" thick plate at 1,000 yds didn't even budge, and there was no impact "smoke". If you're going to run a gas gun, I'd stick with the 6.5 CM or a 6mm family like 6mm CM, GT, Dasher, etc... Thanks for watching another one my friend!
@@The4GunGuy great point. Thank you so much sir.
I’m going guess by the picrail on side of the SP10 you are running the Tactical Brass Recovery System. If your are that is the best on the market and the same that I run on my GAP10. The GAP10 and the Seekins are the same gun since GA uses the Seekins frame and use a Bartlein Barrel. Look forward to your next video.
Hi Malcolm! Yep, it's a TBR. Tried another brand, but my buddy Richard told me about TBR and I love it. Now if I can just get ME to work properly, it'll all be good. Thanks for watching my friend!
Did you consider the 6mm ARC? Curious as the Seekins DMR 6mm arc is well under 2K.
Hi TrueLine! I considered all the other options, but the reality was, I love the 6.5 CM cartridge and I already had all the dies and a ton of bullets, so it made sense for me. I've heard good things about the ARC round though. Thanks for watching my friend!
What is the white tape on your elevation turret?
just out of curiosity, because im considering building a 6.5 AR-10, what bullet have you seen good luck with? I was considering the berger 130 OTM but curious about longer bullets but I know COAL is a factor
Hi ForceRecon! I've run the Hornady 140 gr or 147 gr ELDM's in both bolt and gas guns with great results for me.
Good to know! I saw places selling the berger 140 hybrid ammo and considered that too.
Your sp10 is the 22” correct?
What grain projectile do you use in your 6.5 creedmoor?
140 or 147 Hornady ELDM's.
What is it about matches that makes guns want to not work?
IKR! The thing ran flawlessly until that buzzer went off...But, we adapt and carry on! Thanks for watching Takashi and wish we could shoot together again!
6.5 Creedmoor or .308?
6.5 Creedmoor
What trigger do you have
Hi Matt! I went with a TriggerTech 2-stage Diamond, the link is below...I get nothing for promoting it, so shop where you'd like. I just like their AR triggers. I use Bix n' Andy 2-Stages in my bolt guns. Thanks for watching my friend!:
www.eurooptic.com//TriggerTech-AR10-Two-Stage-Blk-Red-AR-Diamond-Pro-15-40-lbs-Trigger-ART-TRB-14-N.aspx?
@@The4GunGuy I appreciate you getting back with me. I don’t understand how it is. I’m a bit of a trigger ❤ myself, I have a lot of geissle triggers and they are great, but I’ve been wanting to explore other options
@@mattofjax Love my Geissle's in my AR's, but like you said, I just wanted to see how the TriggerTech would work and wanted a drop in trigger. I had great luck with TT until one day at the range practicing it went out on me, so I switched to BnA on my bolt guns. I like the BnA's because I can take them apart and clean them.