alternatively, you can turn that stream of tungsten into a "Magnetohydrodynamic" Cannon. otherwise known as the main gun on a Mass Effect(series) Reaper Capital Ship
Recommendation would be to remake this with a photon ray, I usually use void and GOL to get insane temperatures but you could probably make a plasma heater.
I think the issue was not pressure but air velocity. It was so high it was ripping the tungsten wires off. Maybe retry with the fans but less of then and more than 1 air intake channel to feed into the back of the gun?
Do something with ARAY. Some tips: pscn connected to aray fires it faster, and the ray coming out is the same temperature as the aray. Aray also doesn’t transfer heat.
Fun fact: in Swedish dentists are called tandläkare which roughly translates to into (and I kid you not) _Tooth healer_ also I know that this comment has nothing to do with the video but I have posted it anyway and there is nothing that you can do about it.
im not mad its unrelated, in fact heres another one: the incredibox horror mod orin ayo translated from Yourba menas" happy music" which means it is bipolae
This might seem a bit nerdy but you should try to make a warp core (from star trek) of course not using “WARP” the element in the powder toy. It’s just what the reactor it called.
I like imagining since he said “jumping spiders should be purged from the world” I like imagining he’s doing this to purge all the jumping spiders from the planet he’s destroying with the death star
Adding a exploding material to the center of the earth would make it work better because theoretically in real life if a core of a planet is punctured from the surface it causes a tremendous explosion
I appreciate him not understanding how air works towards the end there. It wasn't the pressure of the wind, it was the speed. You should have just sectioned the wires off and then added a vent that goes around the button.
For cooling: you can use clone and and liquid nitrogen, Doesent matter how cold it gets cause unlike heat it can’t melt. Plus the plasma will Somewhat warm the Death Star up
If you want an interesting video idea, try to convert CO2 to O2 without plant. The only way to do this is under extreme pressure (above 200) and maximum temperature. This results in the release of a few neutrons and oxygen. This is also the last step of fusion possible in the powder toy (in the real world it would fuse into silicon, then iron). The challenge is to use destructible or Meltable objects as a casing for this reaction. An additional objective would be to cool the oxygen down to extract it. I’ve completed this challenge and it would be a good video to watch. The solution to this challenge is in the replies.
Press read more for a solution (I’ve tested and it works) 1.) create a containment vessel with a large space for other components. 2.) Inside the main containment vessel. Place a smaller box (you can use gas/powder/liquid filters) to contain the CO2 3.) inside this box, place one or more clones that clone plutonium (heat & pressure), and uranium (heat). Then place pressure pumps inside the chamber and set to maximum pressure. (These are invincible, but it’s the only way to get high pressure effectively without burning something) 4.) in the main containment vessel, place a clone at the top that fills it with Gel (prevents heat conduction) 5.) start reaction, adjust for problems or issues, save before starting.
Could the issue have been windspeed? Pressure was fine, but the fans were moving to much to fast, sucking in particles that drift into the rear entry port (giggity) and thus destroying the tungsten as it came flying through the system.
Probably bots, even RUclips videos that don't have any understandable reason to be disliked get disliked, any video big enough has them for some weird reason.
This man single handedly proved why the Death Star needed vents
Cover it with a grate so rebel scum don't blow the space station up.
laser
Love how it's impossible to have watched this already
i guess
It is possible now
17* they respawned
@@Kevin-dq5in what
I love how half of every comment starts with "I love"
Hey... has our moon always had only one large crater and an equatorial trench?
Glad I came across this channel, learning more with powder toy.
That’s no moon!
The 2 people that disliked didn't like getting obliterated by lasers
I like
Its very comfortable tho!
Make that 14
@@snansserif316 _nah make it 19_
0:39
To show you the power of plasma, I sawed this world in half!
Welp, who knew that entropy would save the earth from the death star.
Entropy brought you into this world and entropy will remove you from it. Permanently
I would say that you were successful when you shot one side of the planet and the ocean on the other side instantly evaporated. 11:44
Nah that was a pixel or 2 of hyperheated water vapor
alternatively, you can turn that stream of tungsten into a "Magnetohydrodynamic" Cannon. otherwise known as the main gun on a Mass Effect(series) Reaper Capital Ship
Protons would be much more effective as there's hyper-dense deuterium under the surface of the planet. Turns it straight into a molten ball of rock.
So glad the powdertoy is getting the attention it deserves
Recommendation would be to remake this with a photon ray, I usually use void and GOL to get insane temperatures but you could probably make a plasma heater.
I think the issue was not pressure but air velocity. It was so high it was ripping the tungsten wires off. Maybe retry with the fans but less of then and more than 1 air intake channel to feed into the back of the gun?
You have not seen a jumping spider in your life.
No jumping spiders are adorable
Facts
Hey jumping spiders aren't that bad dude
I would make a nuclear reactor inside and when you press the button it opens a gap for neutrons to escape and create a blast from the reactor.
Do something with ARAY. Some tips: pscn connected to aray fires it faster, and the ray coming out is the same temperature as the aray. Aray also doesn’t transfer heat.
Fun fact: in Swedish dentists are called tandläkare which roughly translates to into (and I kid you not)
_Tooth healer_
also I know that this comment has nothing to do with the video but I have posted it anyway and there is nothing that you can do about it.
im not mad its unrelated, in fact heres another one:
the incredibox horror mod orin ayo translated from Yourba menas" happy music" which means it is bipolae
lava in this gqme can also get to 10000 degrees hot
so obsessed with pressure you forgot about velocity
Yesssssssss more powder toy!!!
“Jumping spiders are horrible and should be purged from this planet” never before have I been so offended by something I 100% agree with...
This might seem a bit nerdy but you should try to make a warp core (from star trek) of course not using “WARP” the element in the powder toy. It’s just what the reactor it called.
I like imagining since he said “jumping spiders should be purged from the world” I like imagining he’s doing this to purge all the jumping spiders from the planet he’s destroying with the death star
Adding a exploding material to the center of the earth would make it work better because theoretically in real life if a core of a planet is punctured from the surface it causes a tremendous explosion
I appreciate him not understanding how air works towards the end there. It wasn't the pressure of the wind, it was the speed. You should have just sectioned the wires off and then added a vent that goes around the button.
When the trident thing breaks
Viper: HEY
me: sees titanium fly away by the fan
Please tell me when you were joking when you said you hated jumping spiders.
That’s no moon
@Noah Maddage the sun wait no moon is a deadly lazer
when I made a deathstar I used mercury to conduct so that I could use non-metal things as wires. might work for this also idk
For cooling: you can use clone and and liquid nitrogen, Doesent matter how cold it gets cause unlike heat it can’t melt. Plus the plasma will
Somewhat warm the Death Star up
Also: you can make the death star laser out of titaniium
2x2 gol square in the corner
pov you are spike viper at 3am and watching star wars
It's a small thermal exhaust port, right below the main port.
Ahh yes fix pressure issues by blowing incredible amounts of air into object thus breaking it even more
I don't think it was pressure, I think it was velocity, I think you were just pumping air through so fast that it was ripping the wire out
The Death Star of death that dying itself
does anyone know what song starts at 7:36 ? Its so good
im sad you managed to build a functional one before i managed to make a fully functional one with the actual explosion
I hope you get 200k subs
Same!
@@SpikeViper I think you will easily get to 300k by next year spike
Thanks! Me too!
@@SpikeViper when is road to 180k
@@SpikeViper jumping spiders are adorable
What is the name of the background music in your video?
Not sure exactly but I'm pretty confident it's the background music from the Phoenix Wright games
You made more of a star killer base
use p-type silicon with instant wire to have a piercing death star, as normal metal cant conduct to instant wire
If you want an interesting video idea, try to convert CO2 to O2 without plant. The only way to do this is under extreme pressure (above 200) and maximum temperature. This results in the release of a few neutrons and oxygen. This is also the last step of fusion possible in the powder toy (in the real world it would fuse into silicon, then iron).
The challenge is to use destructible or Meltable objects as a casing for this reaction. An additional objective would be to cool the oxygen down to extract it.
I’ve completed this challenge and it would be a good video to watch.
The solution to this challenge is in the replies.
Press read more for a solution (I’ve tested and it works)
1.) create a containment vessel with a large space for other components.
2.) Inside the main containment vessel. Place a smaller box (you can use gas/powder/liquid filters) to contain the CO2
3.) inside this box, place one or more clones that clone plutonium (heat & pressure), and uranium (heat). Then place pressure pumps inside the chamber and set to maximum pressure. (These are invincible, but it’s the only way to get high pressure effectively without burning something)
4.) in the main containment vessel, place a clone at the top that fills it with Gel (prevents heat conduction)
5.) start reaction, adjust for problems or issues, save before starting.
Spike electricity cant jump through insulstion
Hm
hey, i cant seem to figure out how you lock your zoom in to edit things, can someone tell me how/what the keybind is?
15:29 I'm a big "fan"!
Just recess the plasma guns into the hull.and have the air vent move past it.
original video screw up release when
For me IT is like having highly cooled *LIQUID OXYGEN* canon
As a star wars fan, i approve.
You can use half life in a 2 by 2 square to cool fast
What background music you use, I've been looking for something like that?
It's mostly Ace Attorney music, I don't think it all is, but a lot of it is.
Ah destruction....
NOW THAT’S ALOT OF DAMAGE!
Is this a live stream?
Spike, use titanium instead of tungsten. Although you think it will melt, it will not.
Why did you not just use pump?
why didnt you use titanium for the cable? it is a conductor too
Instant conductor makes the beam pierce everything it passes. Any regular conductor causes it to just go poof on the tiniest particle
OBJECTION!
whenever i come to this channel i want to play tpt lol
Yesterday I learned how to make a pulse laser
Why you don't upload your creations I wanna play with them please upload them please
I wish i was that good at making stuff
bigger pew pew pew
You should turn earth in to starkiller base from the starwars sequel trilogy
I hate the fact he didnt make it out of titanium
WE NEEEEEEEEEEEED MOON
what did the 2 year old me think to write this
thanks you teach me how use cray
Next: life star
You showed me powdertoy and it’s my fav now
Death stars too pog
Dude make a laser that should destroy it like:phot laser
13:12 wait so you need a vent... ep 4 wasn't that stupid after all
😂❤😂
Could the issue have been windspeed? Pressure was fine, but the fans were moving to much to fast, sucking in particles that drift into the rear entry port (giggity) and thus destroying the tungsten as it came flying through the system.
But you know what you want
Maybe instead of plasma, use protons.
SPAAAAAAACCCCCCCEEEEEEEEEEEEEEE
Mission failed
Now put a reactor in it and meltdown the reactor
Now.
sometimes i understand why you're running this on a 3090
Just put the link to the game on this comment
Cleanse the galaxy
very cool video
it was hard to watch you yell about the pressure when the FLOW was the problem
Its colour me impressed
I legitimately don't understand how these get dislikes
Honestly its probably people who are bored and just want to dislike random videos, but who knows
Probably bots, even RUclips videos that don't have any understandable reason to be disliked get disliked, any video big enough has them for some weird reason.
It’s me being critical of myself, definitely
Remember universe sandbox? Also nice video
A US2 video is incoming!
@@SpikeViper Awesome. Also this is the first time a youtuber has ever responded to me so thank you
I love your vids
Cool video
69 likes and 0 dislikes. good vid
RUclips stopped showing dislikes
@@buddyguy4723 not on all vids and also not on all people.
@@cougotgames-theoldies2687 not according to youtube.
@@buddyguy4723 ?
@@cougotgames-theoldies2687 youtube said themselves they are hiding dislikes on all videos.
Oh shiii new video
you should upload hearts of iron 4 again
Nice
when u realize that ur early
This is my death ray. Search "id:2701041"
Or
1026
Maybe first
Claim your less than 100 views ticket here
too late for me :(