Thanks Eric. In the future, show more of the routing screen. Eric does a good job but we don't need to see him from 3 different camera angles. Next time, focus on the LCD display. Thanks.
I’ve used almost every console out there and the M and X32 have got to be the most confusing in terms of routing for me. Too many tabs to go through for a simple 1-1 patch in my opinion. Other than that, great consumer console.
I've been mixing on analog Midas boards for decades. For fun, I asked a colleague (a professional live audio engineer with a masters degree and decades of experience) to, without looking at a manual or video, route a mic with his voice, to the headphones, with reverb, within 5 minutes. The problem with this board is not that it doesn't make sense, because a reasonably intelligent person could figure it out using a well-written manual as a guide. The problem with this board is that Music Tribe is in radio silence mode. There is no well-written manual. And videos like the one presented here are worthless. The only way to learn this board is through rote memorization. There is NOTHING intuitive about it. I'm glad my competition got one first. He and his guys keep having problems trying to figure out their M32 during shows.
Our church recently bought an M32 but because the room gets dark often, we have now purchased a Littlite 18 inch gooseneck external lamp for it. But the lamp color is RED. I am told that there is a brightness setting that can be configured to raise it up beyond 70% where the lamp then turns WHITE. But for the life of me I can't find anywhere that this adjustment screen setting can be configured. Please help!!
I have the exact same model.input 2 mics and 1 phone as playback for minus one. im sending main output to my mac for recording. I have 2 ps15 speakers to use as monitor. during recording, I prefer only to listen to playback and I dont want to put on headphone.could you show me how can i have the option of 1)playback only 2)vocals only 3)playback and vocal using the speakers. thanks
Hi Kevin, I'm assuming the connection to the mac is via usb and it is this you are referring to as playback? If so, soloing this return channel will enable you to hear the playback via monitors. Be sure to link the monitors via the monitor/control room out sockets. Change monitor settings to AFL (After fade listen) if you want to hear the sound post EQ and fader. Isolating the vocals would have to be done via the DAW (recording software you are using). This would need to be setup so direct monitoring is enabled. Once this is done you can solo the vocal track on the computer - which will only hear the vocal through the playback return of the desk. A 3rd option is to route multiple channels out of the DAW to the desk. But that would require setup in the DAW. You could have separate channels for vocals and playback. Hope this helps
Bonjour voilà mon problème j'ai fait ce que Musictribe ma donner M32 FOH AES50 A > DL32 AES50 A (une petite précision c'est une table Behringer ) DL32 AES50 B > M32C AES50 A
Sur le la table façade Foh Allez dans Setup > Global et réglez votre taux d'échantillonnage et réglez la synchronisation sur interne. Sur le M32C (à l'aide de l'application M32-Edit) allez dans Setup > Mixer et réglez le taux d'échantillonnage pour qu'il corresponde à la console FOH, puis Synchronization to AES50 A. Le système devrait maintenant se synchroniser, indiqué par les cases vertes dans le coin supérieur droit de l'écran sur le M32 FOH et sur le côté droit de M32-Edit pour le M32C. Ensuite, sur votre M32C, allez dans le menu Routage > Entrées et réglez la Source sur les options AES50-A (voir capture d'écran suivante). Le M32C tirera alors les entrées du DL32. le souci c'est que tout fonctionne depuis la table FOH façade et retours pas souci , mais depuis ma tablette connecté et mon pc avec Edit m32 et sur mon routeur et MDL32 et M32C les volumes de fonctionne pas pas possible de les bouger comment faire le bon routing svp merci beaucoup
Hi, I have a M32R. is there any way I can send a stereo mix of my 1st two mics to the computer as a stereo mix for sending to OBS for live stream? I only get one side when selecting my input from the soundcard.. cheers
@@MidasOfficial bummer - maybe if i open the cosole and replace the screen with something bigger - would definitely be a nice feature on future models to include a vga, dmix, or hdmi port that would just duplicate the small screen - or maybe i'll tell the church to upgrade to the pro series
So, if I understood correctly, If I use this Stagebok DL16 together with the M32R Live mixer, linked through AES50, ...could I have all 32 preamps working together, 16 through DL16/AES50, plus 16 direct to mixer/analog snake? and..., could I record these 32 channels to SD card?
Yes you can, the one thing you'll want to bear in mind is setting the card inputs to be the 16 local and 16 AES50. As well as setting your channel inputs to be that
How do I route the Aux Ins to go into the card outs? This video didn't really outline that and I haven't been able to find it anywhere. I've downloaded the driver software and the audio into the console from my computer works, however I can't seem to get the audio out from the console to my computer. Any solutions?
thanks! question: I want to use my midas 32R as an analog summing mixer (usb out from logic) and record my installed x-live card. what I am thinking is to simply route the audio out the 8 main xlr outs on the mixer and right back into the mixer using xlr cables into the main inputs. I'm sure I'll have to deselect the input channels from the main outs to prevent a feedback loop, but are the steps to routing? is it even possible? seems like it should be. I guess it would be cool to rout it to the sd card 2 different ways. 1 to 1 for the 1st 8 channels. this would only record the color of the mic pres, but a second way where actual summing is taking place down to 2 channels if that's even possible (using a mix bus to the x-live?). obviously, I wouldn't need it to record both versions at the same time, but it would be ideal. I can then take the 10 channels back into logic and compare make my final decisions. if anyone can list the steps that would be helpful. thanks!
Hi Casey, please put this question in a support ticket via our website community.musictribe.com/pages/create-new-ticket you will be connected to one of our specialist support staff who can talk you through your options step by step
My question is this, when I change my routing to card in 1-8 etc for virtual soundcheck, my gain changes. But when I go back to local, it goes back to the normal gain that was setup during live practice. Am I doing something wrong on the setup/routing? Thank you in advance.
You are not doing anything wrong! This is by design. When you change routing to an input like a stagebox or local input you have the option of changing gain for those channels. Changing to a card input means it will be taking the signal from SD card or USB. As this is digital, you will not require any gain control as the volume should come back as the same volume that was sent for record. The confusion is that when card is selected in routing, an option of digital trim control is available on the channel. (Trim) not to be confused with Gain is designed for minor adjustments and in most cases is not used.
@@MidasOfficial Okay, so basically gain does not come into effect after you select the routing the come back from card (assuming your gain structure was good at time of record)? Now I did have a scenario, where when I selected the playback, the vocals/guitars dropped way out of the mix (and I am 99% sure that they didn't sound that low during live practice), that is when I first noticed the gain drop off, because I didn't understand why it was so much lower than live, have you ever heard of something like this? How should I start my trouble shooting process?
Hi Christian, please ask this question (and any others you may have) on our online webform. Our expert support staff will be able to answer any questions you have in great detail and can talk you through things step by step Technical Support Form: sforce.co/2xRBEjf
You can send the Main Left Right output through the Aux 1/4" jacks. That is what is being shown on the screen as he is talking. You can also send other things through those 1/4" jacks and you can also use them for "inserts" for outboard gear. What that means is if you have an outboard EQ or Compressor, or anything that you want to run a signal through, then these AUX in/out jacks are for that purpose. This would be really handy in a studio.
The routing is very disappointing. It is not possible to use the adat extension with the second 8 channels on the aux channels. i have to route to eight of the normal channels and loose two channels. why did midas programm such a crap? why they have to limitate the user? the block routing is a poor solution.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Thanks Eric. In the future, show more of the routing screen. Eric does a good job but we don't need to see him from 3 different camera angles. Next time, focus on the LCD display. Thanks.
I’ve used almost every console out there and the M and X32 have got to be the most confusing in terms of routing for me. Too many tabs to go through for a simple 1-1 patch in my opinion. Other than that, great consumer console.
I've been mixing on analog Midas boards for decades. For fun, I asked a colleague (a professional live audio engineer with a masters degree and decades of experience) to, without looking at a manual or video, route a mic with his voice, to the headphones, with reverb, within 5 minutes.
The problem with this board is not that it doesn't make sense, because a reasonably intelligent person could figure it out using a well-written manual as a guide. The problem with this board is that Music Tribe is in radio silence mode. There is no well-written manual. And videos like the one presented here are worthless. The only way to learn this board is through rote memorization. There is NOTHING intuitive about it.
I'm glad my competition got one first. He and his guys keep having problems trying to figure out their M32 during shows.
Our church recently bought an M32 but because the room gets dark often, we have now purchased a Littlite 18 inch gooseneck external lamp for it. But the lamp color is RED. I am told that there is a brightness setting that can be configured to raise it up beyond 70% where the lamp then turns WHITE. But for the life of me I can't find anywhere that this adjustment screen setting can be configured. Please help!!
I have the exact same model.input 2 mics and 1 phone as playback for minus one. im sending main output to my mac for recording. I have 2 ps15 speakers to use as monitor. during recording, I prefer only to listen to playback and I dont want to put on headphone.could you show me how can i have the option of 1)playback only 2)vocals only 3)playback and vocal using the speakers. thanks
Hi Kevin, I'm assuming the connection to the mac is via usb and it is this you are referring to as playback?
If so, soloing this return channel will enable you to hear the playback via monitors. Be sure to link the monitors via the monitor/control room out sockets. Change monitor settings to AFL (After fade listen) if you want to hear the sound post EQ and fader.
Isolating the vocals would have to be done via the DAW (recording software you are using). This would need to be setup so direct monitoring is enabled. Once this is done you can solo the vocal track on the computer - which will only hear the vocal through the playback return of the desk.
A 3rd option is to route multiple channels out of the DAW to the desk. But that would require setup in the DAW. You could have separate channels for vocals and playback.
Hope this helps
Bonjour voilà mon problème j'ai fait ce que Musictribe ma donner M32 FOH AES50 A > DL32 AES50 A (une petite précision c'est une table Behringer )
DL32 AES50 B > M32C AES50 A
Sur le la table façade Foh Allez dans Setup > Global et réglez votre taux d'échantillonnage et réglez la synchronisation sur interne.
Sur le M32C (à l'aide de l'application M32-Edit) allez dans Setup > Mixer et réglez le taux d'échantillonnage pour qu'il corresponde à la console FOH, puis Synchronization to AES50 A.
Le système devrait maintenant se synchroniser, indiqué par les cases vertes dans le coin supérieur droit de l'écran sur le M32 FOH et sur le côté droit de M32-Edit pour le M32C.
Ensuite, sur votre M32C, allez dans le menu Routage > Entrées et réglez la Source sur les options AES50-A (voir capture d'écran suivante). Le M32C tirera alors les entrées du DL32.
le souci c'est que tout fonctionne depuis la table FOH façade et retours pas souci ,
mais depuis ma tablette connecté et mon pc avec Edit m32 et sur mon routeur et MDL32 et M32C
les volumes de fonctionne pas pas possible de les bouger comment faire le bon routing svp merci beaucoup
Hi, I have a M32R. is there any way I can send a stereo mix of my 1st two mics to the computer as a stereo mix for sending to OBS for live stream? I only get one side when selecting my input from the soundcard.. cheers
how you connect 5050 amplifier to the snake?
My master is m32 and slave is m32r is there a way to keep everything from the m32 but still have individual control on the m32r
is it possible to connect a larger screen to this console instead of looking at a screen the size of my phone?
Hi Jason, unfortunately there is no way to connect a larger screen on the m32
@@MidasOfficial bummer - maybe if i open the cosole and replace the screen with something bigger - would definitely be a nice feature on future models to include a vga, dmix, or hdmi port that would just duplicate the small screen - or maybe i'll tell the church to upgrade to the pro series
@@mountains889 Thanks for the feedback, we hear you, we will definitely keep it in mind.
When on the Aux Outs tab, you mentioned the RCA inputs - wrong tab for that, yes?
Hello Erik. Can I use M32R as a stagebox? If yes, could you instruct me the connection?
How do I create scenes on the M32?
How rooting for streaming from usb to my iPhone
So, if I understood correctly, If I use this Stagebok DL16 together with the M32R Live mixer, linked through AES50, ...could I have all 32 preamps working together, 16 through DL16/AES50, plus 16 direct to mixer/analog snake? and..., could I record these 32 channels to SD card?
Yes you can, the one thing you'll want to bear in mind is setting the card inputs to be the 16 local and 16 AES50. As well as setting your channel inputs to be that
How do I route the Aux Ins to go into the card outs? This video didn't really outline that and I haven't been able to find it anywhere. I've downloaded the driver software and the audio into the console from my computer works, however I can't seem to get the audio out from the console to my computer. Any solutions?
You have to set the Card output blocks in Routing
I still dont know how to rout a DL16 on a M32r, so that i have the inputs and the outs on the DL16.!!
thanks! question: I want to use my midas 32R as an analog summing mixer (usb out from logic) and record my installed x-live card. what I am thinking is to simply route the audio out the 8 main xlr outs on the mixer and right back into the mixer using xlr cables into the main inputs. I'm sure I'll have to deselect the input channels from the main outs to prevent a feedback loop, but are the steps to routing? is it even possible? seems like it should be. I guess it would be cool to rout it to the sd card 2 different ways. 1 to 1 for the 1st 8 channels. this would only record the color of the mic pres, but a second way where actual summing is taking place down to 2 channels if that's even possible (using a mix bus to the x-live?). obviously, I wouldn't need it to record both versions at the same time, but it would be ideal. I can then take the 10 channels back into logic and compare make my final decisions. if anyone can list the steps that would be helpful. thanks!
Hi Casey, please put this question in a support ticket via our website community.musictribe.com/pages/create-new-ticket
you will be connected to one of our specialist support staff who can talk you through your options step by step
Thank you so much mr webb
can I get the exact link to your official page, I need to Download the offline editor for mac and windows
Hi Edem, You can download it from this page:
www.music-group.com/Categories/Midas/Mixers/Digital-Mixers/M32/p/P0B3I/downloads
Can I get a video on how a beginner can understand routing
My question is this, when I change my routing to card in 1-8 etc for virtual soundcheck, my gain changes. But when I go back to local, it goes back to the normal gain that was setup during live practice. Am I doing something wrong on the setup/routing? Thank you in advance.
You are not doing anything wrong! This is by design. When you change routing to an input like a stagebox or local input you have the option of changing gain for those channels. Changing to a card input means it will be taking the signal from SD card or USB. As this is digital, you will not require any gain control as the volume should come back as the same volume that was sent for record. The confusion is that when card is selected in routing, an option of digital trim control is available on the channel. (Trim) not to be confused with Gain is designed for minor adjustments and in most cases is not used.
@@MidasOfficial Okay, so basically gain does not come into effect after you select the routing the come back from card (assuming your gain structure was good at time of record)? Now I did have a scenario, where when I selected the playback, the vocals/guitars dropped way out of the mix (and I am 99% sure that they didn't sound that low during live practice), that is when I first noticed the gain drop off, because I didn't understand why it was so much lower than live, have you ever heard of something like this? How should I start my trouble shooting process?
Hi Christian, please ask this question (and any others you may have) on our online webform. Our expert support staff will be able to answer any questions you have in great detail and can talk you through things step by step
Technical Support Form:
sforce.co/2xRBEjf
2:20 at 2:28 i don´t understad that he says. Help me please
You can send the Main Left Right output through the Aux 1/4" jacks. That is what is being shown on the screen as he is talking.
You can also send other things through those 1/4" jacks and you can also use them for "inserts" for outboard gear. What that means is if you have an outboard EQ or Compressor, or anything that you want to run a signal through, then these AUX in/out jacks are for that purpose. This would be really handy in a studio.
The routing is very disappointing. It is not possible to use the adat extension with the second 8 channels on the aux channels. i have to route to eight of the normal channels and loose two channels. why did midas programm such a crap? why they have to limitate the user? the block routing is a poor solution.
Hi, I am curious if it works with Ububtu linux system... 🤔
There is a linus app for 32 and 64 bit available from our download centre
@@MidasOfficial thank you so much!! 😊
Hola amigo una consulta no podria hacer tutoriales sobre la M32r pero en español le agradeceria mucho gracias.
Hola amigo, gracias por los comentarios, haremos todo lo posible para que esto suceda
Who edited this? Stop with the alternate SME shot. It doesn’t work, it causes a disconnect for fucks sake!