Your videos are absolutely high quality! Everything thing is well done: the information, the presentation, narration, the camera work, audio, and you get right to the point. Thank you for your time!
So to clarify, @@FishingwithNat, you would recommend a swivel over an anti-kink vane? I used to have serious issues with kinking line, so since returning to lure fishing at the start of the pandemic, I've always used anti-kink vanes rather than swivels. Mine are clear, hopefully low visibility, and are always mounted 12" - 18" up the line from my wire traces; for traces, I use the smallest, lightest ones possible, as I do fish in areas that produce Pike, while at the same time not wanting to spook the Trout...
@@NobleKorhedron Either way will reduce line twist. An anti-kink vane will probably outlast most swivels because a swivel can rust or corrode over time and lose its ability to spin internally and fight line twist. But a vane is much more conspicuous and may spook fish more than a swivel would. I prefer swivels, personally.
I completely understand your point about the vane, @@FishingwithNat; are there any particular small - medium swivels you'd recommend that will resist rust well in freshwater? If it matters at all, I mainly use Flambeau Z-Rust lure boxes for storage of everything but individual jig heads.
My son turned me into a spinner fan !! Who would have thought that 15yr would teach his momma some new tricks 😝. I absolutely love mepps! And roostertails. I’ve been slaying them this year with them and caught some real monsters.
Spinners and spoons and I have a box of grubs and jigs, I have a sling bag I carry, I used black and orange fury today and I caught white bass/sand bass, and a nice large mouth, those are the only lures I use, I also have a catfish box, but you can catch about anything on those lures multi species, it was overcast today.
The only spinner I use for trout is a Panther Martin. I’ve tried plenty but day in and day out, Panthers have produced thousands of trout for me from Washington State, Oregon, California Sierras to Tennessee! I’m convinced that they are the best spinners on earth!
I remember an epic moment early this spring with a 1/4 oz rooster tail. A rainbow trout bit a fly off the top of the water. I casted right at him, reeled in a tiny bit, and felt a thud. It was a nice 2 lb rainbow
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ruclips.net/user/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Caught a small striped bass in my local river today. Too small for food but it was my second fish ever so a nice confidence booster on my in-line spinner. Thanks Nat :)
Even though I'd say I've been pretty successful using spinner baits most of my life, I continue to get more knowledge from videos like this. Great video!
I absolutely love the Mepp's Aglia. My favorite is the 1/6 oz with the willow blade and orange glow in the dark treble hook shank cover. No hair skirt needed. If there's a lure that I would choose to use, to guarantee that I catch fish that day, it would definitely be the 1/6 oz Mepp's Aglia. It'll catch sunfish, perch, bass, and even pike species. It's a very effective and very affordable lure.
Agreed. An Aglia or Rooster Tail have always produced fish for me. I am always shocked when people tell me that they've never used a spinner or never caught anything on one.
Excellent video! Black and silver Roostertail. Pike, walleye, crappie, black bass, white bass, channel cat, sauger, flathead, perch. It's my all time favorite and most productive artificial bait
I've had a lot of success with Blue-Fox Vibrax , i think they "rattle" a little bit which helps get the fishes attention. Also , Celta (great spinner and easy to replace the hook) . Spinners don't necessarily allways have to be shiny though. I've had a lot of success using black spinners.
Definitely. There are a lot of spinners with painted blades instead of polished metal. I like the Vibrax spinners too - I remember as a kid I would go to a small creek that flowed into the river near my house and cast a Vibrax minnow spin. The number of big rock bass and largemouth I would catch there on the Vibrax spinner was just unbelievable.
I grew up casting Rooster Tails for trout in Central NJ. I have a good assortment of sizes now and use them to catch just about any fish that swims…largemouth, smallmouth, perch, northern pike in Ontario, trout. I have some huge ones for musky, but I haven’t thrown them 10,000 times yet.
Nice breakdown of these spinners. Your selection is almost exactly what I have in my tacklebox. A few sizes of Mepps aglia in (rainbow FTW), a couple small rooster tails, and a perch or shiner comet. I can fish any stream with those around here in the north east.
Great information, I really like using spinners because they work really well for catching bass, pike, bluegill, trout… pretty much anything! Great job on this video, I love the underwater shots of the spinners!
You should see my box, @@FishingwithNat; I have a Flambeau model 5007(or possibly 5005) with Z-Rust inserts. It's divided into the following sections * hooks/disgorgers/snips/scissors * small/medium plugs * medium/large plugs * floating topwater lures * slow-sinking topwater lures/poppers * small/medium spinners * medium/large spinners * Flying C spinners (mainly for salmonids) * Tasmanian Devils * Chatterbaits * Minnows * spare anti-kink vanes And those are just the sections I remember off-hand... I have another entire 5005(possibly 5007) box I always carry with all of my soft lures of various kinds; paddle tails, ribbon tails, shads, etc.
When I was a kid I threw spinners almost every time I went fishing because they so reliably caught fish for me. Smallmouth, largemouth, rock bass, and pike. I fished for years without really even learning how to use other baits because I never saw a reason to change my lure!
Man, I absolutely love your videos. Simple, easy to understand, and to the point. Even as an experienced angler, although still relatively young, I can't stop watching your beginner guides (never mind the other ones).❤ If I may, you keep using the verb "casted" [1:04] in various tenses. Especially past tense. It is an incorrect form of the word. It is always either "cast" or "casting." For present, future, or past. 😀
Hmm - that's interesting. I didn't know that cast is the correct past-tense in this case. Thanks for teaching me something in exchange for learning from my videos. :)
Spinners are a blast, and I agree they're a great choice for the beginner angler -- especially because they attract such a variety of fish. Mepp's are great, but can be pricey, especially if you're learning where/where not to throw spinners. I would add to your comments that even cheap spinners catch fish, so don't be afraid to throw something like Walmart's South Bend value pack or whatever is most budget-sensitive for you. Great video -- thanks for sharing!
Totally agree! I would say Mepps' spinners and Rooster Tails are the cream of the crop, but a lot of other brands will catch plenty of fish too. I have had luck with South Bend spinners, Panther Martins, Blue Fox, and others.
Can confirm about learning where not to throw hahaha. Got mine stuck around a tree branch 15-20 feet above the water and broke it off while yanking on it. It will be dangling there for quite some time to remind me of that day. I’m learning to kayak fish and figured if I get a lure stuck I’d be able to paddle over and remove it. Gonna have to diy a 10 ft ladder onto the yak somehow hahaha
I had a big Mepps weed master and that thing caught me more pike than any other lure I’ve ever owned. It was bright pink which is what I found so hilarious about it. I snagged it on a submerged root and have been looking for one in a shop for months.
Learning angler here. Have had some luck catching bass and even a northern pike on a spinner from fishing lake and pond shores. It has been weeks since I have caught anything and I have lost 5 spinners to larger creeks and rivers by getting snagged on rocks. Starting to get discouraged. Any tips for not losing spinners to rocks or snags? Thanks!!
Unfortunately, spinners are good at getting snagged because of the treble hooks that most come with. You could look for spinners with single hooks - many brands sell popular models with a choice between single or treble hooks. Otherwise, the best you can do is to keep your spinner up high where you can see it, and actively avoid snags.
As one who has fun making their own inline spinners, this was a SUPER helpful video!! I actually made several of mine with weedless hooks exactly like shown in the video. Kinda feeling unoriginal now. 😅
@@FishingwithNat treble hooks I’ll leave bare simply because I don’t know how to tie on “feathers” or “hair” I bought a kit with pre dressed hooks for that. If I build one with a weedless hook, I’m tossing on what ever the fish are feeling like. My fave, though I have yet to catch anything with them, is these curly tail grubs with glow in the dark tails! Small rubber minnows or rubber frogs are good too. 😁 pike love them some spinner frogs come mid/late summer. 🎣
@@diaryofagoat-lass1023 Look into fly tying, it’s actually really easy and great fun! You need a vise, scissors, thread, a bobbin, and some glue, and the variety of hair and fur up you can attach is endless.
When I make my own Inline spinners, I find most kits you buy never have enough brass to make them heavy enough for effective casting or depth, so I make my favourite hybrid inline spinners, where the top is standard spinner fair bot the bottom, I attach a small minnow head jig and slip a nice juicy curly tail on, especially if it has a glow in the dark tail. Good casting weight and the pike just can’t ignore them. I made some double blade spinners this time and I think I did not too bad. Silver+green and Red+gold, paired respectively with blue silver and hi vis orange curly tails.
Of all the considerable choice out there, only Joe's Flies Potomac Coachman (nickel blade) has come close to Mepps Aglia for lake trout in my experience here in British Columbia. Great video, thanks.
Mepps Nr. 5 Aglia in Gold is my absolut Pike and Perch Killer in my home waters over here in Europe, can only recommend! Its always my last lure to fish on every fishing day.
Panther martin yellow with red in murky and black with yellow in clear water are what I use for trout, those 2 are significantly more effective than my other ones.
I'm surprised not to much mention of blue fox . Im in northern California and have been making squid spinners with different color and type of blades and river friendly weight
Blue Fox makes good spinners too. One of my favorite spinners as a kid was a Blue Fox minnow spin. I caught hundreds of rock bass and smallmouth on that thing.
love Joes Flies spinners. Although my Thomas Spinner 4 gold beads and an orange bead(Trout lure) SLAY PIKE . I use 6# test on a 5'6 ultra light Mitchel 300(Old) reel or ambassador 5500 with 15# lead core. Mepps Aguila are go to as well.
@@John-vu5qm Pike are very good at finding spinners in cloudy water. I'd suggest a gold-bladed inline spinner or spinnerbait, or a Mepps black fury with a black/yellow or black/orange pattern.
@FishingwithNat Thanks, yes I have a gold in line spinner also a bete lotto spinner if you've ever heard of it it has caught a lot of fish love your videos!!
You could attach it with a swivel and a split ring. It might need a bit of leader line to get it far enough back beyond the tail and out of the main blade's turbulence. There are also trailer hooks that you can add, and some of those come with swivels and blades.
Great video, thanks! I really like rooster tails and panther martins. I have all the supplies to build my own but haven't started yet. On the list before river salmon and fall pike fishing gets going
Trust me when I say this, once you start making your own you will continue and have a lot of fun with it. I have been making my own and they work great!
@@FishingwithNat it is fun and it really is rewarding when you catch some nice fish with your own homemade spinners. You just need some basic hand tools and a pair of round nose pliers. Hit me up if you have questions.
How do you add weight above the spinners, i bought some cheap spinners from temu app they are only 3 grams and they don't cast very far , can you please help me or make a video about it😢
The easiest way to add weight above a spinner is just to clamp on a tiny split shot sinker about a foot up from the spinner. Another way to do it is to tie a snap swivel to your spinner connected directly to the spinner. Or you can add a swivel further up your line.
Shockingly I say it...this presentation grants PHD diploma in spinning lures _ techniques and tips, a crow bar effects (eyes opener) on these guys who already claim ,, years of experience "🤣 pleasantly devastated, I'm watching 👀 your show over and over .. all the best from pacific north west👍
@@FishingwithNat any bright colour grub with sparkle works fine. But as I don't like rubber because it tends to melt paint and plastic of others lures, I started to use very fluffy dressed treble hooks and they work fine too especially in the river, bucktails and woolly worms are very easy to make and very effective with panfish like perch.
@@joaotorres2810 Cool. Are you running them near the bottom? I've had cats take my crankbaits all the time but I've only ever caught one cat on a spinner.
I'd go with a #3 dressed Mepps Aglia like this one: amzn.to/4fQaLQk. Soft swimbaits are also great for smallies. Check out my Life of the Smallmouth Bass video for tips on fishing for smallies if you haven't seen it already. ruclips.net/video/nwKE-44BPCU/видео.html
Some people do it. Unless it's perfectly centered on the treble, it can create uneven drag and result in the entire lure spinning around and potentially overwhelming the swivel. I generally don't like adding any kind of trailer to an inline spinner. I opt for a spinner with a dressed hook for a similar appearance without the unbalanced effect of adding a trailer on one of the hooks.
Hey Nat, much apreciated your videos, very helpfull to those willing to take fishing one step further. I am yet to give spinners a chance, got some 3-4 grams Panther Martin though, and I was wondering if I can add a split shot or two for extra weight and if that will affect the spinner in a negative way, would appreciate your advice. Regards, Florin
You can add a split shot ahead of a spinner for extra casting distance or to fish deeper/faster without impacting the spinner's action. I would keep it at least 8-10 inches ahead of the bait though for a more natural appearance.
Spinners can be used in the sea along the shore or rocks. If the sea becomes rough/windy, I'd switch to fresh bait on the bottom with a heavy sinker rig.
I haven't used the Bronze Slammer myself, but I am rarely disappointed by a Mepps spinner. They make good stuff and I appreciate that their headquarters is right here in Wisconsin.
I usually retrieve them as slow as I can to keep them spinning, but you also want to consider how deep the spinner is running. If you think the fish are mid-column or near the surface, keep it near the surface. If the fish are probably deeper or you want to run it past deeper structure/vegetation, slow down the retrieve so it sinks down further. I will occasionally twitch a spinner, but it's mostly just a steady retrieve. Sometimes I'll move the rod tip to the other side of me to simulate a baitfish darting in a different direction.
Is it just me, or do Mepps spinners have no range when you cast them? Maybe I need to move up to a medium heavy rod for those 1/3 and 1/2 ounce spinners.
A lighter line will give you more casting distance than a heavier rod will. Heavy fluoro or mono lines don't allow you to cast small lures very far. 1/3oz spinners work well with a medium-light or medium power rod and 8lb mono/fluoro or 8-15lb braid.
Hello, I am following you from Egypt and I do not know the English language. I want to clarify how this type of bait works and what it targets, and does the spinner play the role of an insect or what? Please reply
The blade of a spinner reflects light and imitates a small fish in the water. It also adds vibration that a predator fish can detect from a long distance. Some spinners have blades that look like insect wings (like the Mepps Thunderbug) but they still imitate a small fish in the water.
I don't think that would work very well. You could attach a blade to the Zerak by just adding something like this www.cabelas.com/shop/en/bass-pro-shops-blade-spin?ds_e=GOOGLE&ds_c=Cabelas%7CShopping%7CSmart%7CProprietary%7CGeneral%7CNAud%7CNVol%7CNMT&gclid=CjwKCAiAv9ucBhBXEiwA6N8nYC3S5O47qOpuOMnQnf41zlcnf7lGpowVT-73cWkyHOZRatTYCKYkoBoCGscQAvD_BwE&gclsrc=aw.ds That would be a lot more weedless and would look better overall.
I don't have any specific boxes for inline spinners. They do get tangled up when you put a bunch into a pile, but I just deal with that. I'm usually fishing out of kayaks and I typically take 1 box or 2 at most.
I have never used an inline spinner larger than a mepps 1, I am interested in what number is right for which fish type. I cannot find a good hook or blade size chart for whatever reason. Sincerely, a learning fisherman!
A #0 or #1 is great for panfish and trout, or small bass. You'll catch the occasional pike on it too. #2 and #3 is good for bigger fish, mostly pike, walleyes, and decent-sized bass in my area. I've also caught sheephead, channel cats, salmon, and small muskies on them. I use the #4 and #5 mostly for pike and musky. The magnum sizes are pretty much for giant musky and pike.
@@movinon1979 I do not. In my opinion, the right hook size for a particular fish is a balance between being able to easily get it into its mouth and the hook being strong enough to pull the fish in. Hook sizes of 6/0 or bigger (7/0, 8/0, and up) are mostly for really big bass, catfish, or big saltwater species. Hook size gets smaller as you get back to zero and then continue getting smaller as you go to #1, #2, etc. (#2 is smaller than #1). Really small sizes like #10, #12, and smaller are mostly for panfish or micro-fishing because the gap is too small to hook a larger fish, and the wire is too weak to pull them in.
I find size 4 to be large enough to cast and small enough for seatrout to take it. Anything below size3 has never worked for me. I didn’t use spinners much at all, because of the line twist, but since they do work, I have stopped caring.
A size 4 is a really nice lure for larger fish. I've caught rainbow trout and brook trout on a size 00 but you have to be using an ultralight with 2lb or 4 lb line or you'll never be able to cast it.
Cool vids, just got back into it. All these vids really help me out. Used to only just use spinners but crank baits feel the best. Get more bass with cranks, dont like pikes lol
@@Akon-D Their teeth are nasty. I've had big ones cut 50lb fluorocarbon leader. Sometimes it seems the only thing that won't get cut by pike is steel wire.
So, I've been using a mepps #5 bucktail on 50lb braid, after watching your video I feel like I should try a lighter line, but I've still been catching fish what do you think? Will it spin even faster with lighter line?
I use #5s on 20-30lb braid often, but there is a chance you'll get a really big pike/musky/striper on a #5 so it doesn't hurt to have 50lb. I doubt the spinning speed of a #5 blade will change if you downsize the line.
@@FishingwithNat thanks man! Actually had my #5 hammered so many times by bass and pike, a fat 3 footer bent the hooks and they ripped up the tail haha but that was after a couple dozen fish. Definitely worth the $8-$9
@@FishingwithNat What's neat is they catch anything from little perch to suckers, bass (largemouth and smallies) to pike. I caught a nice 33" pike and a huge bass off the silver number 4, and then I was just catching tiny perchy and little bass with it and I looked at my lure and one of my hooks was gone, like broke haha.
@@freshstart349 I have several "retired" spinners hanging on my wall by my computer that have the skirts torn off, wires bent, etc. They earned their retirement for sure.
8lb braid is enough to catch a lot of different things, but it depends what you are fishing for and whether you are fishing from the bank or from a boat. You can usually get away with lighter line from a boat.
@@FishingwithNat Thank you for answering so quickly. I want to go for the ocasional pike and mostly chubs. Hopefully bigger ones :) Thought if 8 lb would be okay if a pike hits.
@@hariszecevic1 8lb is plenty for chubs and could handle a decent pike. You'll want to use a leader on the end for pike though - at least 15# and preferably fluorocarbon or steel. If you hook into a big pike, 8lb will be pushing your luck. My typical pike setup is 20# braid to 30# fluorocarbon leader on a medium or medium-heavy rod.
I would suggest just adding a split shot sinker about a foot ahead of the spinner. You can adjust the weight of the sinker depending on the conditions you're fishing in.
I tend to run a 3g cheb weight in front of my spinner to help it run a little deeper. This also helps because if i decide to vary the speed or add small/short pauses to my retrieve. The cheb will help the blade keep some momentum as it pulls the spinner deeper into the water. Some of my best pike were caught using this method. The only real downside is you find that due to where the weight is located (in front of the lure...) the lure will often end up with one of the hooks on the treble wrapped over the leader/trace so requires a second of untangling after you wind it back in, but so long as you feather the lure with a finger on the spool before it hits the water when you cast. Everything should be just fine as it gives the lure time to straighten out before it hits the water. But you could just bypass all this by getting a heavier lure but that costs money. (you could try a 5 or 7g cheb weight but i've never had to. 3g is what works for me!)
I've never caught a snapper on an inline spinner, but I have caught them while bottom fishing for carp and catfish. They have very bony mouths so the hooks usually aren't in very far and you can get them out with a long pliers or even just wiggling the hook with a stick.
The double bladed spinners on the market just don't work, so I cut the hook off a quarter ounce panther martin, attach a split ring, then connect it to a number two blue fox spinner.
Your videos are absolutely high quality! Everything thing is well done: the information, the presentation, narration, the camera work, audio, and you get right to the point. Thank you for your time!
Thanks so much for the comment. I put a lot of work into these videos and it's nice to see that recognized. :)
So to clarify, @@FishingwithNat, you would recommend a swivel over an anti-kink vane? I used to have serious issues with kinking line, so since returning to lure fishing at the start of the pandemic, I've always used anti-kink vanes rather than swivels.
Mine are clear, hopefully low visibility, and are always mounted 12" - 18" up the line from my wire traces; for traces, I use the smallest, lightest ones possible, as I do fish in areas that produce Pike, while at the same time not wanting to spook the Trout...
@@NobleKorhedron Either way will reduce line twist. An anti-kink vane will probably outlast most swivels because a swivel can rust or corrode over time and lose its ability to spin internally and fight line twist. But a vane is much more conspicuous and may spook fish more than a swivel would. I prefer swivels, personally.
I completely understand your point about the vane, @@FishingwithNat; are there any particular small - medium swivels you'd recommend that will resist rust well in freshwater?
If it matters at all, I mainly use Flambeau Z-Rust lure boxes for storage of everything but individual jig heads.
@@NobleKorhedron I like the stainless steel VMC swivels www.cabelas.com/shop/en/vmc-stainless-steel-rolling-swivel
My son turned me into a spinner fan !! Who would have thought that 15yr would teach his momma some new tricks 😝. I absolutely love mepps! And roostertails. I’ve been slaying them this year with them and caught some real monsters.
Both of those are excellent lures. I rarely leave home without both of them.
Panther Martin black body with yellow body and gold blade….nuff said!
@@tomcat122200 Yellow spinners with gold blades are some of my most productive baits ever on the rivers around here.
Spinners and spoons and I have a box of grubs and jigs, I have a sling bag I carry, I used black and orange fury today and I caught white bass/sand bass, and a nice large mouth, those are the only lures I use, I also have a catfish box, but you can catch about anything on those lures multi species, it was overcast today.
love this!!!
The only spinner I use for trout is a Panther Martin. I’ve tried plenty but day in and day out, Panthers have produced thousands of trout for me from Washington State, Oregon, California Sierras to Tennessee! I’m convinced that they are the best spinners on earth!
Awesome. Thanks for sharing.
I remember an epic moment early this spring with a 1/4 oz rooster tail. A rainbow trout bit a fly off the top of the water. I casted right at him, reeled in a tiny bit, and felt a thud. It was a nice 2 lb rainbow
Awesome
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ruclips.net/user/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Thanks for watching
Caught a small striped bass in my local river today. Too small for food but it was my second fish ever so a nice confidence booster on my in-line spinner. Thanks Nat :)
Awesome - way to go!
Anything is fun! Congrats
My favorites are the Mepps Agila dressed, Panther Martin Classic, and Yakima Rooster Tail
Those are all excellent
Mepps black fury in red spots on black is my all time favorite . I have had walleye, Bass, pike and Muskie on a #3.
It's a great lure. I use it all the time.
junior angler here. this was perfect. thanks so much
I'm glad to hear that. Thanks for the comment
They catch everything
Even though I'd say I've been pretty successful using spinner baits most of my life, I continue to get more knowledge from videos like this. Great video!
Thanks - I appreciate it
I absolutely love the Mepp's Aglia. My favorite is the 1/6 oz with the willow blade and orange glow in the dark treble hook shank cover. No hair skirt needed. If there's a lure that I would choose to use, to guarantee that I catch fish that day, it would definitely be the 1/6 oz Mepp's Aglia. It'll catch sunfish, perch, bass, and even pike species. It's a very effective and very affordable lure.
Agreed. An Aglia or Rooster Tail have always produced fish for me. I am always shocked when people tell me that they've never used a spinner or never caught anything on one.
I believe that is an aglia long . Any Mepps is awesome
@@garysavala665 Yeah the Aglia Long models have the willow blade for more depth. Mepps makes great stuff.
Works for salmon
Great video. No bs all info. Learned a lot in a short amount of time. Thanks man
Thanks - that's my style. No need for fluff - just get to the point.
Excellent video!
Black and silver Roostertail. Pike, walleye, crappie, black bass, white bass, channel cat, sauger, flathead, perch. It's my all time favorite and most productive artificial bait
It's hard to beat a Rooster tail! It's one of my favorite baits too.
I've had a lot of success with Blue-Fox Vibrax , i think they "rattle" a little bit which helps get the fishes attention. Also , Celta (great spinner and easy to replace the hook) . Spinners don't necessarily allways have to be shiny though. I've had a lot of success using black spinners.
Definitely. There are a lot of spinners with painted blades instead of polished metal. I like the Vibrax spinners too - I remember as a kid I would go to a small creek that flowed into the river near my house and cast a Vibrax minnow spin. The number of big rock bass and largemouth I would catch there on the Vibrax spinner was just unbelievable.
I grew up casting Rooster Tails for trout in Central NJ. I have a good assortment of sizes now and use them to catch just about any fish that swims…largemouth, smallmouth, perch, northern pike in Ontario, trout. I have some huge ones for musky, but I haven’t thrown them 10,000 times yet.
Throw them a few thousand more times and you'll get one!
Nice breakdown of these spinners. Your selection is almost exactly what I have in my tacklebox. A few sizes of Mepps aglia in (rainbow FTW), a couple small rooster tails, and a perch or shiner comet. I can fish any stream with those around here in the north east.
You bet. Those are all awesome. The rainbow trout pattern Aglias are great too.
Great information, I really like using spinners because they work really well for catching bass, pike, bluegill, trout… pretty much anything! Great job on this video, I love the underwater shots of the spinners!
I never go fishing without a few spinners in my box. They are definitely some of my favorite lures.
You should see my box, @@FishingwithNat; I have a Flambeau model 5007(or possibly 5005) with Z-Rust inserts.
It's divided into the following sections
* hooks/disgorgers/snips/scissors
* small/medium plugs
* medium/large plugs
* floating topwater lures
* slow-sinking topwater lures/poppers
* small/medium spinners
* medium/large spinners
* Flying C spinners (mainly for salmonids)
* Tasmanian Devils
* Chatterbaits
* Minnows
* spare anti-kink vanes
And those are just the sections I remember off-hand...
I have another entire 5005(possibly 5007) box I always carry with all of my soft lures of various kinds; paddle tails, ribbon tails, shads, etc.
Extremely well done! My tackle box isn't completed unless I've got some Mepps spinners in it and it was nice seeing each style compared.
Thanks. I'm glad you enjoyed it!
Mine either I love mepps aglias and comet minnows
Blue Fox, Rooster Tails, and Spin N' Glo's are my go-to lures. Fox & Rooster Tails are my fav's for trout and Foxes & Spin N' Glo's for salmon
It's hard to beat a rooster tail. I have a ton of those things.
Rewatching this video. Again, very well done. And thanks for reminding me what to do. I'm in smallmouth country and these work excellent on them.🎉🎉
I absolutely love my spinners as they rarely disappoint. The Blue Fox Vibrax are my favorites, but little Meps and Worden's Roosters are nice too.
When I was a kid I threw spinners almost every time I went fishing because they so reliably caught fish for me. Smallmouth, largemouth, rock bass, and pike. I fished for years without really even learning how to use other baits because I never saw a reason to change my lure!
thank you Nat, I love your videos, clear, simple to understand, and direct to the point, apreciate it.
Great - thanks for this feedback
Man, I absolutely love your videos. Simple, easy to understand, and to the point. Even as an experienced angler, although still relatively young, I can't stop watching your beginner guides (never mind the other ones).❤
If I may, you keep using the verb "casted" [1:04] in various tenses. Especially past tense. It is an incorrect form of the word. It is always either "cast" or "casting." For present, future, or past. 😀
Hmm - that's interesting. I didn't know that cast is the correct past-tense in this case. Thanks for teaching me something in exchange for learning from my videos. :)
@FishingwithNat Awesome to know I could teach you something too:) Keep up the great videos, Nat 👍
Spinners are a blast, and I agree they're a great choice for the beginner angler -- especially because they attract such a variety of fish.
Mepp's are great, but can be pricey, especially if you're learning where/where not to throw spinners. I would add to your comments that even cheap spinners catch fish, so don't be afraid to throw something like Walmart's South Bend value pack or whatever is most budget-sensitive for you.
Great video -- thanks for sharing!
Totally agree! I would say Mepps' spinners and Rooster Tails are the cream of the crop, but a lot of other brands will catch plenty of fish too. I have had luck with South Bend spinners, Panther Martins, Blue Fox, and others.
You can try blue fox flash . Cheap and the bass love them
Can confirm about learning where not to throw hahaha. Got mine stuck around a tree branch 15-20 feet above the water and broke it off while yanking on it. It will be dangling there for quite some time to remind me of that day.
I’m learning to kayak fish and figured if I get a lure stuck I’d be able to paddle over and remove it. Gonna have to diy a 10 ft ladder onto the yak somehow hahaha
I had a big Mepps weed master and that thing caught me more pike than any other lure I’ve ever owned. It was bright pink which is what I found so hilarious about it.
I snagged it on a submerged root and have been looking for one in a shop for months.
It's a great spinner for tossing through sparse vegetation. Not easy to find in a store though!
Learning angler here. Have had some luck catching bass and even a northern pike on a spinner from fishing lake and pond shores. It has been weeks since I have caught anything and I have lost 5 spinners to larger creeks and rivers by getting snagged on rocks. Starting to get discouraged. Any tips for not losing spinners to rocks or snags? Thanks!!
Unfortunately, spinners are good at getting snagged because of the treble hooks that most come with. You could look for spinners with single hooks - many brands sell popular models with a choice between single or treble hooks. Otherwise, the best you can do is to keep your spinner up high where you can see it, and actively avoid snags.
As one who has fun making their own inline spinners, this was a SUPER helpful video!! I actually made several of mine with weedless hooks exactly like shown in the video. Kinda feeling unoriginal now. 😅
Thanks for the comment. That sounds like fun to make your own inline spinners. Do you dress the hooks or leave them empty?
@@FishingwithNat treble hooks I’ll leave bare simply because I don’t know how to tie on “feathers” or “hair”
I bought a kit with pre dressed hooks for that.
If I build one with a weedless hook, I’m tossing on what ever the fish are feeling like. My fave, though I have yet to catch anything with them, is these curly tail grubs with glow in the dark tails! Small rubber minnows or rubber frogs are good too. 😁 pike love them some spinner frogs come mid/late summer. 🎣
@@diaryofagoat-lass1023 Cool. It's hard to beat the classic and inexpensive curly-tail grub.
@@diaryofagoat-lass1023 Look into fly tying, it’s actually really easy and great fun! You need a vise, scissors, thread, a bobbin, and some glue, and the variety of hair and fur up you can attach is endless.
When I make my own Inline spinners, I find most kits you buy never have enough brass to make them heavy enough for effective casting or depth, so I make my favourite hybrid inline spinners, where the top is standard spinner fair bot the bottom, I attach a small minnow head jig and slip a nice juicy curly tail on, especially if it has a glow in the dark tail. Good casting weight and the pike just can’t ignore them.
I made some double blade spinners this time and I think I did not too bad. Silver+green and Red+gold, paired respectively with blue silver and hi vis orange curly tails.
Very cool
Concise, well informed, quality content is so hard to find. Thank you!
Thank you - I appreciate you taking the time to leave this feedback.
Of all the considerable choice out there, only Joe's Flies Potomac Coachman (nickel blade) has come close to Mepps Aglia for lake trout in my experience here in British Columbia. Great video, thanks.
Cool - I've tried other spinners but I keep coming back to the Aglia and the Rooster Tail. I hadn't yet heard of the one you mentioned.
Great vid. The vibrax bullet type spinners have always done well for me
Thanks. That was my favorite lure as a kid. I used to pull some huge rock bass out of the local stream with it.
Mepps Nr. 5 Aglia in Gold is my absolut Pike and Perch Killer in my home waters over here in Europe, can only recommend! Its always my last lure to fish on every fishing day.
That's one of my absolute favorite spinners too. The pike and musky around here smash it.
Panther martin yellow with red in murky and black with yellow in clear water are what I use for trout, those 2 are significantly more effective than my other ones.
Cool, thanks for sharing
I'm surprised not to much mention of blue fox . Im in northern California and have been making squid spinners with different color and type of blades and river friendly weight
Blue Fox makes good spinners too. One of my favorite spinners as a kid was a Blue Fox minnow spin. I caught hundreds of rock bass and smallmouth on that thing.
love Joes Flies spinners. Although my Thomas Spinner 4 gold beads and an orange bead(Trout lure) SLAY PIKE . I use 6# test on a 5'6 ultra light Mitchel 300(Old) reel or ambassador 5500 with 15# lead core. Mepps Aguila are go to as well.
It's hard to beat the fun of ultralight fishing with spinners.
This is the most thorough and well presented video I’ve seen on this subject thank you very much sir
Thank you - I appreciate the comment.
Love mepps, caught a 40+ inch pike the other day with a green one
Awesome
What would be the best spinner for pike in cloudy water?
3:40 I have that spinner on the left except for the hair on the hook and the spoon is bronze and kinda rusty
@@John-vu5qm Pike are very good at finding spinners in cloudy water. I'd suggest a gold-bladed inline spinner or spinnerbait, or a Mepps black fury with a black/yellow or black/orange pattern.
@FishingwithNat Thanks, yes I have a gold in line spinner also a bete lotto spinner if you've ever heard of it it has caught a lot of fish love your videos!!
@@John-vu5qm Awesome, thank you
Thanks, Nat.
Excellent vid. 👍🏼
I've not been using in-line spinners recently.
Time to try them again.
They are fantastic lures. Thanks for the comment.
Panther Martin & Rooster Tail have brought me the most "luck" for Trout in streams.
Hard to beat either of those!
Joe's Flies "White Miller" with a single trailer hook #1 spoon. I've caught 5lb 14oz Large mouth Bass on it and all species in cold water streams.
Cool - I haven't heard of that one
Best angling channel I've ever seen ❤
Thanks - I appreciate that. 🙂
-Panther Martin spinners are trout getters.
Blue Fox Musky Buck is superb for pike & lunge.
An oldie was the JuneBug spinner with a single weedless hook & a nightcrawler thru the coontail & cabbage.
I luv your videos too...Fish On !
@@danreid6712 All good recommendations. Tight lines!
How would you attach a trailing spinner? Like one at the end of a long musky bucktail? Barrel Swivel maybe?
You could attach it with a swivel and a split ring. It might need a bit of leader line to get it far enough back beyond the tail and out of the main blade's turbulence. There are also trailer hooks that you can add, and some of those come with swivels and blades.
Great video, thanks! I really like rooster tails and panther martins. I have all the supplies to build my own but haven't started yet. On the list before river salmon and fall pike fishing gets going
Definitely - both of those are great. Essential baits to have for fall salmon and pike!
Trust me when I say this, once you start making your own you will continue and have a lot of fun with it. I have been making my own and they work great!
@@erichildreth7562 I haven't made any of my own yet but I've seen some very neat homemade spinners and it looks like fun to make them.
@@FishingwithNat it is fun and it really is rewarding when you catch some nice fish with your own homemade spinners. You just need some basic hand tools and a pair of round nose pliers. Hit me up if you have questions.
@@erichildreth7562 Sounds like a fun winter project!
For pike, I've always have had pretty good luck with a mepps aglia 4 and a plastic grub.
Do you put it right on the treble hook or on a stinger hook?
@@FishingwithNat Right on the treble. Usually a white Mister Twister.
@@garskoci Interesting!
How do you add weight above the spinners, i bought some cheap spinners from temu app they are only 3 grams and they don't cast very far , can you please help me or make a video about it😢
The easiest way to add weight above a spinner is just to clamp on a tiny split shot sinker about a foot up from the spinner. Another way to do it is to tie a snap swivel to your spinner connected directly to the spinner. Or you can add a swivel further up your line.
@@FishingwithNatthank you, will a Carolina rig work for spinners
Shockingly I say it...this presentation grants PHD diploma in spinning lures _ techniques and tips, a crow bar effects (eyes opener) on these guys who already claim ,, years of experience "🤣 pleasantly devastated, I'm watching 👀 your show over and over .. all the best from pacific north west👍
Thanks - I appreciate your comment. More to come...
No words! What a content!!
Thanks - I appreciate the feedback and I'm glad you enjoyed the video!
these videos are great thankyou very much 🥰😍🤩
Great - thank you
In North Italy we use a lot trailers, they work great with perch.
Cool. What kinds of trailers do you put on them?
@@FishingwithNat any bright colour grub with sparkle works fine. But as I don't like rubber because it tends to melt paint and plastic of others lures, I started to use very fluffy dressed treble hooks and they work fine too especially in the river, bucktails and woolly worms are very easy to make and very effective with panfish like perch.
@@monicabello1962 Cool - thanks for the feedback.
A swivel usually don't help much. You can use off center head weight to avoid line twist, such as the Mepps Lusox do.
A swivel can help but only if it's a decent quality one. Cheaper swivels will get jammed or rusted and the whole swivel will spin with the lure.
Love this video! My goto for trout is thomas brand inlines. My goto for big fish is mepps #4 and #5!!
I'm tying up a Mepps #4 chartreuse and a Mepps #5 black fury right now for a pike/musky trip tomorrow. They never fail me.
@@FishingwithNat good luck we have been tearing up channel catfish on the #5 and #4s
@@joaotorres2810 Cool. Are you running them near the bottom? I've had cats take my crankbaits all the time but I've only ever caught one cat on a spinner.
What brand swivel do you recommend?
I'm not partial to a particular brand but I tend to use VMC swivels and snaps.
Awesome underwater footage!
Thanks!
What is the best size spinner for smallmouth?
I'd go with a #3 dressed Mepps Aglia like this one: amzn.to/4fQaLQk. Soft swimbaits are also great for smallies. Check out my Life of the Smallmouth Bass video for tips on fishing for smallies if you haven't seen it already. ruclips.net/video/nwKE-44BPCU/видео.html
Do you think rigging a grub trailer of some kind onto a musky spinner is feasible? I've seen examples where the grub is rigged through the treble.
Some people do it. Unless it's perfectly centered on the treble, it can create uneven drag and result in the entire lure spinning around and potentially overwhelming the swivel. I generally don't like adding any kind of trailer to an inline spinner. I opt for a spinner with a dressed hook for a similar appearance without the unbalanced effect of adding a trailer on one of the hooks.
Ive never had any luck pr skill with spinners rooster tails or mepps specifically
Those are both some of my most successful lures!
Ive has the best luck with the Panther Martin in line spinners and spinners with Red Hooks
Thanks for the feedback
Hey Nat, much apreciated your videos, very helpfull to those willing to take fishing one step further. I am yet to give spinners a chance, got some 3-4 grams Panther Martin though, and I was wondering if I can add a split shot or two for extra weight and if that will affect the spinner in a negative way, would appreciate your advice.
Regards,
Florin
You can add a split shot ahead of a spinner for extra casting distance or to fish deeper/faster without impacting the spinner's action. I would keep it at least 8-10 inches ahead of the bait though for a more natural appearance.
@FishingwithNat Thanks for your reply Nat, I will give it a try next time.
Regards,
Florin
I fish smallmouth bass, and this lure is kind of like my “wacky worm”. Whenever no other lure is working, I’m throwing on a rooster tail
You bet. I've caught countless smallies on rooster tails
Inline and small jig n grubs. Work great in pressured waters.
@@Chasin_Baitman Agreed
I had a spinner once.
Only once?
Then I took an arrow to the knee.
I lost one just a couple days ago and nearly went for a swim trying to get it back 😂
That's great. 👍🏻
😁
nice video .. can we use spinner bait in the sea for shore or rock fishing and what we do if the sea become more windy ?
Spinners can be used in the sea along the shore or rocks. If the sea becomes rough/windy, I'd switch to fresh bait on the bottom with a heavy sinker rig.
thanks very much
@@FishingwithNat thanks very much
@@zakariahussainanwarhasson4577 Glad I could help.
Mepps #2 & #3 dressed with a tri colored (white, yellow & green) blade for Northern & Bass
A solid choice
This really helped me with all the info and hardware Thanks
Thanks for the comment.
This was awesome thanks so much! Definitely gave me some ideas. Do you have an opinion on the Mepps Bronze Slammer?
I haven't used the Bronze Slammer myself, but I am rarely disappointed by a Mepps spinner. They make good stuff and I appreciate that their headquarters is right here in Wisconsin.
Rooster tail is my favorite. Fishing them my whole life
You can't go wrong with a rooster tail. They are excellent.
Any style Panther Martin was my favorite for everything
Those are good spinners too
does a mepps aglia with a grey dressed trebble hook and a hot fire tiger blade work well in stained water?
Yes, the bright blades are an advantage in stained water
How should you retrieve a spinner? Slow/medium/fast? With stops or without?
I usually retrieve them as slow as I can to keep them spinning, but you also want to consider how deep the spinner is running. If you think the fish are mid-column or near the surface, keep it near the surface. If the fish are probably deeper or you want to run it past deeper structure/vegetation, slow down the retrieve so it sinks down further. I will occasionally twitch a spinner, but it's mostly just a steady retrieve. Sometimes I'll move the rod tip to the other side of me to simulate a baitfish darting in a different direction.
@@FishingwithNat Thanks for taking the time to reply!
@@intermarer9145 Happy to help.
Great info! Perfect. No fuss.
Thanks - I appreciate the comment.
You're doing great work!! Thank you 😁
Thanks - I appreciate it
Is it just me, or do Mepps spinners have no range when you cast them? Maybe I need to move up to a medium heavy rod for those 1/3 and 1/2 ounce spinners.
A lighter line will give you more casting distance than a heavier rod will. Heavy fluoro or mono lines don't allow you to cast small lures very far. 1/3oz spinners work well with a medium-light or medium power rod and 8lb mono/fluoro or 8-15lb braid.
@@FishingwithNat Thanks for the tip I'll go with a ligher mono.
@@Patton243 Sounds good. Good luck fishing!
Hello, I am following you from Egypt and I do not know the English language. I want to clarify how this type of bait works and what it targets, and does the spinner play the role of an insect or what? Please reply
The blade of a spinner reflects light and imitates a small fish in the water. It also adds vibration that a predator fish can detect from a long distance. Some spinners have blades that look like insect wings (like the Mepps Thunderbug) but they still imitate a small fish in the water.
@@FishingwithNat I understand, thanks for the simple explanation
@@OmAr-ve2zf You're welcome. I'm glad I could help.
Can i attach my 23 gm zerak weedlesss fish trap ( softplastic weedlesss lure ) to bluefox 5 number spinner for sneakhead fishing
I don't think that would work very well. You could attach a blade to the Zerak by just adding something like this www.cabelas.com/shop/en/bass-pro-shops-blade-spin?ds_e=GOOGLE&ds_c=Cabelas%7CShopping%7CSmart%7CProprietary%7CGeneral%7CNAud%7CNVol%7CNMT&gclid=CjwKCAiAv9ucBhBXEiwA6N8nYC3S5O47qOpuOMnQnf41zlcnf7lGpowVT-73cWkyHOZRatTYCKYkoBoCGscQAvD_BwE&gclsrc=aw.ds
That would be a lot more weedless and would look better overall.
What would you recommend to b the best inline spinner tackle boxes?
I don't have any specific boxes for inline spinners. They do get tangled up when you put a bunch into a pile, but I just deal with that. I'm usually fishing out of kayaks and I typically take 1 box or 2 at most.
I have never used an inline spinner larger than a mepps 1, I am interested in what number is right for which fish type. I cannot find a good hook or blade size chart for whatever reason.
Sincerely, a learning fisherman!
A #0 or #1 is great for panfish and trout, or small bass. You'll catch the occasional pike on it too. #2 and #3 is good for bigger fish, mostly pike, walleyes, and decent-sized bass in my area. I've also caught sheephead, channel cats, salmon, and small muskies on them. I use the #4 and #5 mostly for pike and musky. The magnum sizes are pretty much for giant musky and pike.
@@FishingwithNat Thank you! I appreciate the advice!
@@movinon1979 Happy to help.
@@FishingwithNat Do you have a hook chart for fish types?
@@movinon1979 I do not. In my opinion, the right hook size for a particular fish is a balance between being able to easily get it into its mouth and the hook being strong enough to pull the fish in. Hook sizes of 6/0 or bigger (7/0, 8/0, and up) are mostly for really big bass, catfish, or big saltwater species. Hook size gets smaller as you get back to zero and then continue getting smaller as you go to #1, #2, etc. (#2 is smaller than #1). Really small sizes like #10, #12, and smaller are mostly for panfish or micro-fishing because the gap is too small to hook a larger fish, and the wire is too weak to pull them in.
❤❤❤❤❤❤❤❤ beautiful video
Thank you
I find size 4 to be large enough to cast and small enough for seatrout to take it. Anything below size3 has never worked for me. I didn’t use spinners much at all, because of the line twist, but since they do work, I have stopped caring.
A size 4 is a really nice lure for larger fish. I've caught rainbow trout and brook trout on a size 00 but you have to be using an ultralight with 2lb or 4 lb line or you'll never be able to cast it.
See that coho bolo, the best lure of the lot, caught thousands of salmon and steelhead with that lure.
Cool. It's great for pike too.
Cool vids, just got back into it. All these vids really help me out. Used to only just use spinners but crank baits feel the best. Get more bass with cranks, dont like pikes lol
They can be a pain but they sure are fun. Cranks and spinners are both awesome baits.
Where I'm from the pike are on steroids. Their teeth are wayyy too intimidating.
@@Akon-D Their teeth are nasty. I've had big ones cut 50lb fluorocarbon leader. Sometimes it seems the only thing that won't get cut by pike is steel wire.
Thank you for this info and god bless
Thanks for the comment. I'm glad you enjoyed the video.
Caught 3 bass today back to back with the black and gold.
Very nice
So, I've been using a mepps #5 bucktail on 50lb braid, after watching your video I feel like I should try a lighter line, but I've still been catching fish what do you think? Will it spin even faster with lighter line?
I use #5s on 20-30lb braid often, but there is a chance you'll get a really big pike/musky/striper on a #5 so it doesn't hurt to have 50lb. I doubt the spinning speed of a #5 blade will change if you downsize the line.
@@FishingwithNat thanks man! Actually had my #5 hammered so many times by bass and pike, a fat 3 footer bent the hooks and they ripped up the tail haha but that was after a couple dozen fish. Definitely worth the $8-$9
@@FishingwithNat What's neat is they catch anything from little perch to suckers, bass (largemouth and smallies) to pike. I caught a nice 33" pike and a huge bass off the silver number 4, and then I was just catching tiny perchy and little bass with it and I looked at my lure and one of my hooks was gone, like broke haha.
@@freshstart349 I have several "retired" spinners hanging on my wall by my computer that have the skirts torn off, wires bent, etc. They earned their retirement for sure.
@@freshstart349 It really is a lure that will catch anything
Hi, is a 8lb braid enough or should i go with a stronger one? Im using a shimano 2.7m 10-30g medium action spinning rod.
8lb braid is enough to catch a lot of different things, but it depends what you are fishing for and whether you are fishing from the bank or from a boat. You can usually get away with lighter line from a boat.
@@FishingwithNat Thank you for answering so quickly. I want to go for the ocasional pike and mostly chubs. Hopefully bigger ones :) Thought if 8 lb would be okay if a pike hits.
@@hariszecevic1 8lb is plenty for chubs and could handle a decent pike. You'll want to use a leader on the end for pike though - at least 15# and preferably fluorocarbon or steel. If you hook into a big pike, 8lb will be pushing your luck. My typical pike setup is 20# braid to 30# fluorocarbon leader on a medium or medium-heavy rod.
@@FishingwithNat I will stay with the 8 lb then for now with a fluoro leader. Thank you very much. Keep up the good content :)
@@hariszecevic1 Thanks. Good luck!
Panther Martin are great trout lures. Roadrunner jig
Agreed. Thanks for the feedback.
good job Nat , as usual
Thank you
How to add weight to the spinners for deeper water.Ty
I would suggest just adding a split shot sinker about a foot ahead of the spinner. You can adjust the weight of the sinker depending on the conditions you're fishing in.
very good lure, thank you very much for sharing videos that are very useful for anglers
Thanks for the comment.
All I fish with almost is spinners in pa it’s been consistently good for all species! I use them to troll on me canoe
Cool. Spinners are some of my most reliable lures.
Do spinners work while sea fishing during clear weather?
Good question. I have never used spinners in saltwater so I'm not sure. I'm a long way from the ocean.
Yeah, I did switch to a comet but too late.... 🤣 awesome video.
Next time you'll know better!
Great video 🤙🏽
Thanks
I tend to run a 3g cheb weight in front of my spinner to help it run a little deeper. This also helps because if i decide to vary the speed or add small/short pauses to my retrieve. The cheb will help the blade keep some momentum as it pulls the spinner deeper into the water. Some of my best pike were caught using this method.
The only real downside is you find that due to where the weight is located (in front of the lure...) the lure will often end up with one of the hooks on the treble wrapped over the leader/trace so requires a second of untangling after you wind it back in, but so long as you feather the lure with a finger on the spool before it hits the water when you cast. Everything should be just fine as it gives the lure time to straighten out before it hits the water.
But you could just bypass all this by getting a heavier lure but that costs money.
(you could try a 5 or 7g cheb weight but i've never had to. 3g is what works for me!)
Good feedback - thanks!
This is genious!
Greetings from Northern Ireland......subscribed
Thanks!
Great video, very informative 👍
Thank you
What do you do about catching Snapping Turtle
I've never caught a snapper on an inline spinner, but I have caught them while bottom fishing for carp and catfish. They have very bony mouths so the hooks usually aren't in very far and you can get them out with a long pliers or even just wiggling the hook with a stick.
which spinner would you use in muddy colour river water in Thailand
Something with a gold blade or a high-contrast blade like yellow/black or orange/black
The double bladed spinners on the market just don't work, so I cut the hook off a quarter ounce panther martin, attach a split ring, then connect it to a number two blue fox spinner.
I haven't had a lot of luck with double-bladed spinners either. I prefer the single blades.
@@FishingwithNat The one I made works fine. Thanks for your reply and have a great day!
Have people used the minnow spinner on shore
I use minnow spinners like Comets and Vibrax Minnow Spins from shore all the time
Very Nice - Thanks!
😎👍
Thanks for the feedback!