That’s the best part about this channel. Realizing mistakes, admitting to them, and sharing the mistakes with everyone to learn so we don’t do the same.
You sir are the Norm Abram of RUclips. The only difference is you don't hide your mistakes. You voice your frustration, then show or tell us how to fix those mistakes. I enjoy watching your videos from start to finish because it's what I enjoy, and I sure don't want to miss anything. Thanks for all your effort. It is very much appreciated!
You could make a 4hr video and I'd still be one of the remaining 17 people still watching it to the end. Like a previous commenter stated "its better than watching Netflix". Love your content, your explanation and your presentation.
Thanks for watching to the End X 3 Jed... after the 'epic' Master Carpenter's Footstool Build video a while back I thought I'd never do such a long video again but, with significant viewer/subscriber comments like yours, I've learned it's not the view-killer that common 'best practices' suggest. Best, Matt
I'm glad I stayed until the very end! This one was a master class: raw materials, concept, design, operations, decisions, problem-solving...and a happy alloy of art and woodworking (or wood machining). Harvesting the log by hand set the tone for this organic piece.
Thanks for your appreciative review Raf... much appreciated! Hope you don't mind that I pin your comment for awhile in hopes others who realize the value of long format videos available for free here at Next Level Carpentry on RUclips... Best, Matt
@@NextLevelCarpentry not at all Matt. Maybe quick tip ( if I remember correctly) next time ( on the pin/lock) drill the bigger size first ,then the smaller size second, this will give less chance to wander of since the smaller drill will follow the point made by the bigger one , instead of the bigger drill has to follow on the side off his ground cutting edge the smaller drill.
@@rafvdp6391 Thanks for sharing insight/perspective on this problematic detail! FWIW I've had difficulty getting the 2nd, smaller size to follow the centerpoint left by the first/larger one in th past so this time I opted for the small followed by large sequence which works great when drilling steel. I think there would be similar difficulty with either sequence in this application so I hope the take-away for viewers is that a bit of extra attention to concentricity when drilling these holes is well advised... that's my take-away for sure! 😉😎 Best, Matt
@@NextLevelCarpentry I suggest clamping, (using the Houdini-proof clamps), on the drill press table, drill, change the bit, and drill the second hole. If nothing moves, counter bore should be centred on hole. An alternative is jig/clamps and plunge router with long enough bits.
@@jeffbaker8808 Definitely a more responsible approach Jeff... could have saved myself a good deal of grief had I used your clamping suggestion! Next time, maybe? Best, Matt
I have said this before, probably too many times.....but it is true again.....I may never build this project but there's still so much to learn about process which is what I love about this channel. Personally, I would love to see how you did the curved one which, for you viewers who did not stay til the end of the end of the end, is ....at the end. Great video Matt.
I woke up to your video...long story.. but continued watching till the end. My husband and I really enjoyed it. I love the live edge box! Great job and great video. Thanks!.
Thank you, Todd. I'm always reminded of how much more difficult it is to produce videos of this sort of work than even the hardest jobs so it's nice to hear it acknowledge and know it's appreciated...
@Next Level Carpentry I have tremendous respect for the multi-talented capabilities it takes--paired with a tenacious mindset--to produce the content that makes Next Level Carpentry continue to be a standout in an ever expanding field.
I'm a member of Club 17 .. My new bandsaw is still in its boxes, but I've collected some different logs to be ready to make different kinds of boxes in this category when my tiny shop is ready to be my new workplace. I haven't seen like this (made) before, and the round/curved edges make a huge difference! It's really a beautiful project, ready to copy, or to change a few things here and there, not because it's needed, but just because we can and there is something about making something unique. Matt, as always, thanks a lot!! (y)
Hi from your number one fan in Canada. I have to say, you said something at the 42:17 mark, about the little piece of bark that fell off the lid. And it really made me realize that no matter what we build , even if it’s ten of the same exact pieces / style of say furniture , they are all so alike but OH SO DIFFERENT and UNIQUE, as no two pieces of wood are identical. And I thank you for letting me see that , stepping back and looking at the BIG picture that anyone who builds with wood either from a lumber yard or straight from a piece of firewood . There will NEVER BE ANOTHER PIECE LIKE IT ON EARTH . So thanks for the taste of reality and a reminder of how unique each piece of wood is from another .
Hey Mr. B... thanks for watching and commenting! Dealing with the reality of 'different and unique' is a necessary realization for anyone working with natural products. Those slight differences or imperfections are often called 'character' and explain away naturally occurring variation. When talking to potential clients I try to make it clear that variation is inevitable and, if they don't like it, I suggest (tongue in cheek) to just use formica because every piece of that is the same... and oh so boring!
I watched it all !! I kept thinking this is something I'd like to make...and it just kept getting more and more involved to where I thought I'm not sure I could do it !!
Will I ever make one of these boxes myself? ... Probably not. Did I meticulously watch the entire 2:20:42 as if I would? ... Defitely yes. Top notch work as always Matt! I love to see the result of something that looks so simple on the surface, but has all kinds of hidden engineering and complexity. It's the finished product of a true master of your craft. Even if I don't ever attempt this exact project myself, you have such a wealth of carpentry and woodworking knowledge that I'mm sure I will eventually use some of your techniques on future projects of my own. FWIW I sent a message to the marketing team a Starbond, they should be paying you by now.
Although it was a 2 1/2 hour video it was so well done and so interesting watching it that the time went by so fast. Didn’t realize it was that long until I checked the time stamp after the video was finished. Enjoyed every minute of it.
Thanks Barry... FWIW There's a few more videos here at Next Level Carpentry in the neighborhood of 2 hours in length that you might enjoy considering your willingness to stay tuned for longer than the 20 minute average video on RUclips😉👍😎
I often nod off through videos, but I am pleased to say I stayed wide eyed right to the very end. There are some great methods and techniques you showed that translate to many projects I have in mind.
Hey Matt, This was a long video but the longer I watched the more I was fascinated and the more I learned. I stayed to the end even though long, for me woodworking has been mostly in linear dimensions. I may never make a fine box like yours, but if I was to find just the right piece of "un-started furniture"... Who knows he trouble I might get into... SO thank you for this great instructional video.
Awesome project Matt! There's a ton of detail and juicy tips in this episode. Strangely enough, I've always drilled the counter bore first with forstner bits since they leave a "guide hole" for the next smaller bit. I suspect the brad point bits would work the same way to ensure concentricity... For the record, I like the Rough Cuts. The problem solving monolog is worth every second!
Thanks Greg... you might appreciate the fact that I had to do a bit of editing on the segment where I drilled out the box cavity with the 2"+ forstner bit because the bit kept stalling out and I shot that segment before doing in-depth repairs to the drive pulley system on the drillpress 😉😎 Your drilling sequence is insightful and useful. I too prefer that sequence but in the case of deep holes and smaller diameters generally find it less reliable. Although after all the extra fuss I created for myself with latch hole concentricity I wish I took a different approach on this project! Thanks too for grace on the 'rough cut' format... you probably know as well as anyone how much extra work it would take to scrub all the clumsy segments involved with the latch. I'd have to start all over with a different box and all the 'teachable moments' would be scrubbed away too, along with the benefit to others of the 'problem solving monologue... Best, Matt
Thanks for the great video it was insightful and entertaining i appreciate all your time and efforts. Its hard to find craftsmanship of your caliber anymore. Thank you and keep it up!
Just "stumbled" upon your video... watched to the very, very, very end and was happy that I did. I personally appreciate the obsticals you encountered and your showing us how you processed through getting the results wanted. Long video ... yes ... worth watching ... yes, to me atleast.. Problem solving, for me, is a must in artful wood working. Excellent video and appreciated the effort you put into this project.
Glad to hear it Gary... thanks for watching and commenting on this one! FWIW long, deep dive videos are pretty common here on the Channel. Hope you find others interesting/informative too!
I showed my wife this box and she loved it but the locking mechanism was something she stated would shake her jewelry around to unlock. I simple said I just won’t put a lock on it. She can hardly wait for me to make this for her. Thank You Matt another Great Teaching Lesson.
Thanks for watching and commenting on this one David! While researching for this video I learned that 'puzzle boxes' are their own thing, created to generate interest and appreciation more than usefulness. I thought the puzzle feature would add another layer to the build which it did IMHO. I didn't mention in the video that the first one of these I did was a wedding gift where solving the puzzle was more than half the point of the gift in the first place. Good news is that your job to make you wife happy will be simpler without the tricky tuning of the latch. Since the lid will likely slide very freely you might consider using two magnets: one in the end of the box in place of the pin and the other in the lid but not recessed. Strong magnets from Total Element would hold the lid in place even if the box were held on end but would require only a push to slide the lid and open the box. Have fun with the build! Best, Matt
Excellent tutorial, thank you! I watched this Friday after work and went into my shop with a 3 year old piece of fire Saturday and made one with out the latch. Doesn't look as good as yours but was fun and challenging to build. I left the plywood on the bottom, flipped the box upside down and used a slot cutter on my router table for the groove, running the plywood along the router table fence.
You're welcome Ronnie... seems NLC has a reputation for publishing long videos😎 FWIW Here's the longest one to date in case you've got time for another epic: ruclips.net/video/sxBsNEYp140/видео.html BTW if you end up as a Patron, there's more than a few patron only videos that are pushing an hour in length too...
Thank you for this video! I have no woodworking experience but hope to one day. While a long video, I appreciate the explanation of your decisions and work. Your attention to detail is inspiring. Thanks!
very creative project! love it!!! i was able to see the hole problem with the pin!!! ill have to go to my dads basement shop. he's passed but the shop is stil in my moms basement. ill have to see if he has any 21+ year old flacking material and see if ill use it for a project.
Matt, as always another awesome production. Very interesting project. I’m one of the end of the end of the end watchers. I always enjoy your projects and have learned a lot of useful tricks and tips that help me with building my own projects.
Thanks for being one of the End X 3 viewers... much appreciated! I felt that pushing the limits with some tools and using others for unusual functions would translate to other projects and hope that's your experience in that some of those tricks help you out along the way. Best, Matt
Without all of the safety warnings and CYA statements you could have edited a quarter of the filming, but totally essential in todays world. Great job of explaining the process and I of course waited until the outro. Really enjoy your simplification of somewhat complex uses of very unforgiving power tools. My real world learn by mistake experience was you might say exhilarating and could be used as a how not to endanger your self and or product video, if that were even in existing technology at that time. Looking forward to seeing what you have in mind for the next visit!
Thanks for sayin' Pat... and for not giving me grief about how many times I said "epic video" in the final cut of this video... I didn't realize how many times I said it until the final edit and got tired of hearing it myself! 😉😂😎
If that's was the ONLY takeaway you get from Next Level Carpentry videos you have grasped a real game changer. Good news is that any quality putty knife can be turned into a 'sharp putty knife' simply by holding it vertically and dragging it across a fine flat file laying on any flat surface. I choose to clamp the file in a vise to hold it firmly during the process...
I'm up to the part where you are about to run the log segment through the jointer. I'm picturing a square board placed at each end, with clamp(s) across the top holding the boards to each end. They are positioned so that on a flat surface an edge of each board is on that surface; at the "left" end the log is raised, at the "right" end it is flush with the edge of the board, and the log is rotated so that the proper side is "up". In other words, holding the log exactly as it should go through the jointer. Clamped properly (or CA glued???) the boards deal with the orientation issue. Sorry if that is too confusing.
I'm not exactly sure of the method your envisioning but think there's plenty of other more accurate and likely more responsible ways of getting through that step and would encourage anyone to think it through and only proceed when they're convinced it is better and safer for their skill set and comfort level. I've made more than a few things out of logs and have developed a comfort level in doing so but it's still has my full attention anytime I attempt such a procedure because of the potential for catastrophe. Work safe and have fun!
Just encountered this. Excellent work ! Let\s me know that I could do the very same thing - just be patient and work each step out and we can have a genuinely unique gift for someone special !
I like the smurf gloves, though I have a pair that are cutproof (used by police and EMTs usually). Had a finger come too close to the blade and it actually stalled out my 1 HP saw, made a 1/16 nick in the first layer of skin on the finger and made a 1/4" hole in the gloves. Best $8 I ever spent.
FWIW I wear those "Smurf gloves" for grip alone without relying on them for protection. In fact, using gloves around power tools is most often an ill advised liability IMHO.
You’re a brave man installing that latch! That pin sticking may become a problem with changing humidity and perhaps getting oxidized over time.... Very interesting video and great final product!
Well I stayed to the bitter end :) I have to say you have the patience of “ Job”. I watch you a lot and am impressed with your ingenuity in many really complicated projects. However this one seemed to have you frustrated from the beginning to the end. I have to say I admire you for not throwing it in the trash half way through, cracks , drilling the bottom to deep, getting the latch to work etc. I did enjoy journey as they would say. My only criticism of the end result was the latch. Having to turn it upside down to engage it the having to drop it to unlatch seems a little hooky. Mikey a loyal subscriber
I can see your sense of accomplishment getting that round lid to actually slide. I think I felt the same way when I drilled a curved piece of deer antler for a most beautiful pipe stem that joined the awesome bowl made of the crown. Almost like Sherlock Holmes but a bit more Sam Houston. I am a box fanatic and a bit of a xenophile. I was blessed with some awesome men in my life that well I guess taught me the fine art of awesomeness. I've been threatening to get back serious with my jewelry boxes. But I've added a knew hat to my trades. So now I need to start making boxes again tho put the jewelry in I make. I'm gonna have to watch some other videos of yours. I can watch other people going about something in a way maybe a lot of people would want tp correct or ask why they didn't do it this way out that way. You clearly know there's multiple methods of deferring a felion.
Great video Matt! Great tips and awesome little project You ever done any vids on round wood furniture joinery? Mortises and tenonses...s.... and scribing shoulders. Keep up the good work!
Amazing work my friend but if that is sitting on my wife’s dressing table, the latch pin doesn’t really needs to be there! I’m going to try and make this but no pin
Matt, I know that you are very experienced using the table saw. I have a friend who was also very experienced when he nearly lost his hand in a kickback accident cutting a 4x4 on the table saw. The piece came back at him and nearly tore his fingers completely off. Please be very careful using powerful equipment!!
![BabyChiefDoit - Too Slow (feat. STAR BANDZ) [Official Music Video]](http://i.ytimg.com/vi/zayaxws7RPg/mqdefault.jpg)
I had to leave 40 mins in ..to many "I could of's" n " were just gonna with" ...
Well EXCUUUUUUUUUUUUUSE me!
Even your spelling is long...lol your work is pretty awsome though !!!
I😢 1:23:36
Aa🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
That’s the best part about this channel. Realizing mistakes, admitting to them, and sharing the mistakes with everyone to learn so we don’t do the same.
You sir are the Norm Abram of RUclips. The only difference is you don't hide your mistakes. You voice your frustration, then show or tell us how to fix those mistakes. I enjoy watching your videos from start to finish because it's what I enjoy, and I sure don't want to miss anything. Thanks for all your effort. It is very much appreciated!
You're too kind, Corey... but thank you!
You could make a 4hr video and I'd still be one of the remaining 17 people still watching it to the end. Like a previous commenter stated "its better than watching Netflix". Love your content, your explanation and your presentation.
Thanks for watching to the End X 3 Jed... after the 'epic' Master Carpenter's Footstool Build video a while back I thought I'd never do such a long video again but, with significant viewer/subscriber comments like yours, I've learned it's not the view-killer that common 'best practices' suggest.
Best,
Matt
The fact that u don't PAUSE FOR A WORD FROM R SPONSOR, makes ur videos that much BETTER, thanx
I watched the whole video and there is no way, I would ever attempt to make this! I must say, I respect your skills and patience.
I'm glad I stayed until the very end! This one was a master class: raw materials, concept, design, operations, decisions, problem-solving...and a happy alloy of art and woodworking (or wood machining). Harvesting the log by hand set the tone for this organic piece.
This is the only channel that I can sit through 2 hours of and not realize that 2 hours had passed
Quite a compliment Charles... thank you!
Who needs Netflix if you following Matt. Fantastic result and top Notch video.👍
Love all the little details and rabbit holes.🤣
Thanks for your appreciative review Raf... much appreciated! Hope you don't mind that I pin your comment for awhile in hopes others who realize the value of long format videos available for free here at Next Level Carpentry on RUclips...
Best,
Matt
@@NextLevelCarpentry not at all Matt. Maybe quick tip ( if I remember correctly) next time ( on the pin/lock) drill the bigger size first ,then the smaller size second, this will give less chance to wander of since the smaller drill will follow the point made by the bigger one , instead of the bigger drill has to follow on the side off his ground cutting edge the smaller drill.
@@rafvdp6391 Thanks for sharing insight/perspective on this problematic detail!
FWIW I've had difficulty getting the 2nd, smaller size to follow the centerpoint left by the first/larger one in th past so this time I opted for the small followed by large sequence which works great when drilling steel. I think there would be similar difficulty with either sequence in this application so I hope the take-away for viewers is that a bit of extra attention to concentricity when drilling these holes is well advised... that's my take-away for sure! 😉😎
Best,
Matt
@@NextLevelCarpentry I suggest clamping, (using the Houdini-proof clamps), on the drill press table, drill, change the bit, and drill the second hole. If nothing moves, counter bore should be centred on hole. An alternative is jig/clamps and plunge router with long enough bits.
@@jeffbaker8808 Definitely a more responsible approach Jeff... could have saved myself a good deal of grief had I used your clamping suggestion! Next time, maybe?
Best,
Matt
I have said this before, probably too many times.....but it is true again.....I may never build this project but there's still so much to learn about process which is what I love about this channel. Personally, I would love to see how you did the curved one which, for you viewers who did not stay til the end of the end of the end, is ....at the end. Great video Matt.
This was an absolutely stellar build. Thank you.
I woke up to your video...long story.. but continued watching till the end. My husband and I really enjoyed it. I love the live edge box! Great job and great video. Thanks!.
That was, indeed, easy! We only needed to watch. You had to make it, shoot and edit the video! Thanks!
Thank you, Todd. I'm always reminded of how much more difficult it is to produce videos of this sort of work than even the hardest jobs so it's nice to hear it acknowledge and know it's appreciated...
@Next Level Carpentry I have tremendous respect for the multi-talented capabilities it takes--paired with a tenacious mindset--to produce the content that makes Next Level Carpentry continue to be a standout in an ever expanding field.
... and here I thought farmers were the ones who were always outstanding in their field. 😉🤣
Seriously I really do appreciate the compliment Todd! 😎
I enjoy the longer video format, I can always watch it in segments if I need to. Also the "rough" camera shots work well.
I'm a member of Club 17 ..
My new bandsaw is still in its boxes, but I've collected some different logs to be ready to make different kinds of boxes in
this category when my tiny shop is ready to be my new workplace.
I haven't seen like this (made) before, and the round/curved edges make a huge difference!
It's really a beautiful project, ready to copy, or to change a few things here and there, not because it's needed, but just
because we can and there is something about making something unique.
Matt, as always, thanks a lot!! (y)
Hi from your number one fan in Canada. I have to say, you said something at the 42:17 mark, about the little piece of bark that fell off the lid. And it really made me realize that no matter what we build , even if it’s ten of the same exact pieces / style of say furniture , they are all so alike but OH SO DIFFERENT and UNIQUE, as no two pieces of wood are identical. And I thank you for letting me see that , stepping back and looking at the BIG picture that anyone who builds with wood either from a lumber yard or straight from a piece of firewood . There will NEVER BE ANOTHER PIECE LIKE IT ON EARTH . So thanks for the taste of reality and a reminder of how unique each piece of wood is from another .
Hey Mr. B... thanks for watching and commenting!
Dealing with the reality of 'different and unique' is a necessary realization for anyone working with natural products. Those slight differences or imperfections are often called 'character' and explain away naturally occurring variation. When talking to potential clients I try to make it clear that variation is inevitable and, if they don't like it, I suggest (tongue in cheek) to just use formica because every piece of that is the same... and oh so boring!
I watched it all !! I kept thinking this is something I'd like to make...and it just kept getting more and more involved to where I thought I'm not sure I could do it !!
Will I ever make one of these boxes myself? ... Probably not.
Did I meticulously watch the entire 2:20:42 as if I would? ... Defitely yes.
Top notch work as always Matt! I love to see the result of something that looks so simple on the surface, but has all kinds of hidden engineering and complexity. It's the finished product of a true master of your craft. Even if I don't ever attempt this exact project myself, you have such a wealth of carpentry and woodworking knowledge that I'mm sure I will eventually use some of your techniques on future projects of my own.
FWIW I sent a message to the marketing team a Starbond, they should be paying you by now.
I think the rough cut videos are my favorite. More conversational in nature and I like seeing the thought process evolve.
I have absolutely learned so much since k found your channel and implemented your teachings into my work. I love these videos
Thanks for letting know, Corby... it's really encouraging to hear and makes for good motivation to continue!
Wow…. Just WOW. Epic isn’t the word. NEXT LEVEL EPIC
This video slipped through unseen!
Verrrry sneaky! 🤓
Although it was a 2 1/2 hour video it was so well done and so interesting watching it that the time went by so fast. Didn’t realize it was that long until I checked the time stamp after the video was finished.
Enjoyed every minute of it.
Thanks Barry... FWIW There's a few more videos here at Next Level Carpentry in the neighborhood of 2 hours in length that you might enjoy considering your willingness to stay tuned for longer than the 20 minute average video on RUclips😉👍😎
I often nod off through videos, but I am pleased to say I stayed wide eyed right to the very end. There are some great methods and techniques you showed that translate to many projects I have in mind.
I always love watching your videos. Your channel is one of the few worth watching.
Hey Matt,
This was a long video but the longer I watched the more I was fascinated and the more I learned. I stayed to the end even though long, for me woodworking has been mostly in linear dimensions. I may never make a fine box like yours, but if I was to find just the right piece of "un-started furniture"... Who knows he trouble I might get into...
SO thank you for this great instructional video.
You r one amazing man.
I am always challenged by your attention to detail. Thank you
It wasn't until around 2:03:00 that I realized why I like this channel so much.
This is a great one. Thanks for the inspiration.
Great Video. It emphasizes your personality and humor like no other.
I watched until the end. Great video! I'm happy you included any hick ups and remedies to them unlike some who just make it all look simple
That little one is a good idea:)
"Unstarted Furniture Store" = brilliant!
I watched all of this what a fantastic job you did I will be making one when I find a nice log thanks for sharing g your knowledge
Thanks Ken... FWIW looking for and finding the right log can be a rewarding part of the project in itself... happy hunting!
I hung out 'till the end, and want to say thank you for another entertaining and informative video.
Excellent stuff, thank you
Only you can make this look easy loved every minute 💖🙋🏽♀️🙏🏽thank you 💝
Also made it to the end x3. I like more information rather than less, thank you very much.
Watched it. Long yes, but worth it to see the process and end product.
Thanks
Awesome project Matt! There's a ton of detail and juicy tips in this episode. Strangely enough, I've always drilled the counter bore first with forstner bits since they leave a "guide hole" for the next smaller bit. I suspect the brad point bits would work the same way to ensure concentricity... For the record, I like the Rough Cuts. The problem solving monolog is worth every second!
Thanks Greg... you might appreciate the fact that I had to do a bit of editing on the segment where I drilled out the box cavity with the 2"+ forstner bit because the bit kept stalling out and I shot that segment before doing in-depth repairs to the drive pulley system on the drillpress 😉😎
Your drilling sequence is insightful and useful. I too prefer that sequence but in the case of deep holes and smaller diameters generally find it less reliable. Although after all the extra fuss I created for myself with latch hole concentricity I wish I took a different approach on this project!
Thanks too for grace on the 'rough cut' format... you probably know as well as anyone how much extra work it would take to scrub all the clumsy segments involved with the latch. I'd have to start all over with a different box and all the 'teachable moments' would be scrubbed away too, along with the benefit to others of the 'problem solving monologue...
Best,
Matt
Thanks for the great video it was insightful and entertaining i appreciate all your time and efforts. Its hard to find craftsmanship of your caliber anymore. Thank you and keep it up!
Thanks for sayin' Clint... much appreciated!
Just "stumbled" upon your video... watched to the very, very, very end and was happy that I did. I personally appreciate the obsticals you encountered and your showing us how you processed through getting the results wanted. Long video ... yes ... worth watching ... yes, to me atleast.. Problem solving, for me, is a must in artful wood working. Excellent video and appreciated the effort you put into this project.
Glad to hear it Gary... thanks for watching and commenting on this one! FWIW long, deep dive videos are pretty common here on the Channel. Hope you find others interesting/informative too!
Wow! Incredible! You never disappoint, but you worked extra hard on this one!
I’m only 3:20 into the vid, but your time travel references already made my mind go dizzy, and I love it… :D
I showed my wife this box and she loved it but the locking mechanism was something she stated would shake her jewelry around to unlock.
I simple said I just won’t put a lock on it. She can hardly wait for me to make this for her. Thank You Matt another Great Teaching Lesson.
Thanks for watching and commenting on this one David!
While researching for this video I learned that 'puzzle boxes' are their own thing, created to generate interest and appreciation more than usefulness. I thought the puzzle feature would add another layer to the build which it did IMHO. I didn't mention in the video that the first one of these I did was a wedding gift where solving the puzzle was more than half the point of the gift in the first place. Good news is that your job to make you wife happy will be simpler without the tricky tuning of the latch. Since the lid will likely slide very freely you might consider using two magnets: one in the end of the box in place of the pin and the other in the lid but not recessed. Strong magnets from Total Element would hold the lid in place even if the box were held on end but would require only a push to slide the lid and open the box. Have fun with the build!
Best, Matt
I watched till the end of the end of the end... And I enjoyed it!
Glad I stayed to the end - great job - great video.
Thanks!
great video! we ALL LEARNED A LITTIL!
Excellent tutorial, thank you! I watched this Friday after work and went into my shop with a 3 year old piece of fire Saturday and made one with out the latch. Doesn't look as good as yours but was fun and challenging to build. I left the plywood on the bottom, flipped the box upside down and used a slot cutter on my router table for the groove, running the plywood along the router table fence.
I just upgraded recently from a direct drive craftsman to the same table saw you have and love it, so much better.
Always enjoy your videos.
That looks really nice!
This man is a master...awesome confidence and experience as always!
That was craftsmanship !!
Damn, that was a long video, worth every minute, I might watch it again😀 thank you very much. I plan to be a patron in the coming months.
You're welcome Ronnie... seems NLC has a reputation for publishing long videos😎 FWIW Here's the longest one to date in case you've got time for another epic: ruclips.net/video/sxBsNEYp140/видео.html
BTW if you end up as a Patron, there's more than a few patron only videos that are pushing an hour in length too...
Great video. You used all your tricks and had to dream up even more. Lots of fun.
Thank you for this video! I have no woodworking experience but hope to one day. While a long video, I appreciate the explanation of your decisions and work. Your attention to detail is inspiring. Thanks!
That’s a nice furniture store
Absolutely loved the video, yes the whole thing. Lol. The curved box looks awsome as well. And ya need a button that says that wasn't so easy.
I can imagine a whole library of needed buttons now! 🤣
l enjoy NLC videos, hanging out in your workshop no hurry, just the way l use my time,
Awesome vid. Love the design did not mind length as all of it taught me new info
Very very nice! I hope this does well as far as the You Tube algo-thingy, In any case this is great content. Please keep it coming!
I love your videos. I always learn something. The boxes look cool.
“I’ll pause for a word from our sponsors. But I really can’t do that because I don’t have any sponsors.” 😆😄😂
I was here to the end 👍although most of it was ten second fast forward 😉
Definitely drug out explaining the obvious and unnecessary. Way too simplified for the average woodworker I know. I couldn’t watch three of these.
@@richardc6932 great for well enthused 🤗although getting inside the box is crushingly ridiculous impressively impressive 🤔
Great video! Awesome project.
very creative project! love it!!! i was able to see the hole problem with the pin!!! ill have to go to my dads basement shop. he's passed but the shop is stil in my moms basement. ill have to see if he has any 21+ year old flacking material and see if ill use it for a project.
Good job 👏 that’s pretty cool 😎
Matt, as always another awesome production. Very interesting project. I’m one of the end of the end of the end watchers. I always enjoy your projects and have learned a lot of useful tricks and tips that help me with building my own projects.
Thanks for being one of the End X 3 viewers... much appreciated! I felt that pushing the limits with some tools and using others for unusual functions would translate to other projects and hope that's your experience in that some of those tricks help you out along the way.
Best, Matt
Made it to the end! I only fell asleep twice! 😉
Quite an accomplishment Stephen... I fell asleep at least twice as much editing this thing! 😂😎
Without all of the safety warnings and CYA statements you could have edited a quarter of the filming, but totally essential in todays world. Great job of explaining the process and I of course waited until the outro. Really enjoy your simplification of somewhat complex uses of very unforgiving power tools. My real world learn by mistake experience was you might say exhilarating and could be used as a how not to endanger your self and or product video, if that were even in existing technology at that time. Looking forward to seeing what you have in mind for the next visit!
Epic log.
Thanks for sayin' Pat... and for not giving me grief about how many times I said "epic video" in the final cut of this video... I didn't realize how many times I said it until the final edit and got tired of hearing it myself!
😉😂😎
Would love to see one of these made for my home security device a little oversized and lined with felt.
Epic video!!!
NO, that WASN'T EASY. Great video. I had to stay til the end. Make the video of the BIG MYSTERY BOX. Thanks.
I’m likin the lichen!
When you cured the flocking , you put that box in the hot seat.
I thought of it more as a day at the beach😃
I watched several of your very long videos, and one thing stands out: I have to get a sharp putty knife.
If that's was the ONLY takeaway you get from Next Level Carpentry videos you have grasped a real game changer. Good news is that any quality putty knife can be turned into a 'sharp putty knife' simply by holding it vertically and dragging it across a fine flat file laying on any flat surface. I choose to clamp the file in a vise to hold it firmly during the process...
I'm up to the part where you are about to run the log segment through the jointer. I'm picturing a square board placed at each end, with clamp(s) across the top holding the boards to each end. They are positioned so that on a flat surface an edge of each board is on that surface; at the "left" end the log is raised, at the "right" end it is flush with the edge of the board, and the log is rotated so that the proper side is "up". In other words, holding the log exactly as it should go through the jointer. Clamped properly (or CA glued???) the boards deal with the orientation issue.
Sorry if that is too confusing.
I'm not exactly sure of the method your envisioning but think there's plenty of other more accurate and likely more responsible ways of getting through that step and would encourage anyone to think it through and only proceed when they're convinced it is better and safer for their skill set and comfort level. I've made more than a few things out of logs and have developed a comfort level in doing so but it's still has my full attention anytime I attempt such a procedure because of the potential for catastrophe.
Work safe and have fun!
Great vodeo as always.
I love the project, I just hope I can make it through the video with out pulling my ears off !
Yeah... good luck with THAT! 🤣
Just encountered this. Excellent work ! Let\s me know that I could do the very same thing - just be patient and work each step out and we can have a genuinely unique gift for someone special !
That was easy, 8) ...and quick.
I need to see the curved lid solution
I like the smurf gloves, though I have a pair that are cutproof (used by police and EMTs usually). Had a finger come too close to the blade and it actually stalled out my 1 HP saw, made a 1/16 nick in the first layer of skin on the finger and made a 1/4" hole in the gloves. Best $8 I ever spent.
FWIW I wear those "Smurf gloves" for grip alone without relying on them for protection. In fact, using gloves around power tools is most often an ill advised liability IMHO.
You’re a brave man installing that latch! That pin sticking may become a problem with changing humidity and perhaps getting oxidized over time.... Very interesting video and great final product!
Well I stayed to the bitter end :) I have to say you have the patience of “ Job”. I watch you a lot and am impressed with your ingenuity in many really complicated projects. However this one seemed to have you frustrated from the beginning to the end. I have to say I admire you for not throwing it in the trash half way through, cracks , drilling the bottom to deep, getting the latch to work etc. I did enjoy journey as they would say. My only criticism of the end result was the latch. Having to turn it upside down to engage it the having to drop it to unlatch seems a little hooky. Mikey a loyal subscriber
Great project I was entertained to the end of the end and the end, going shopping hope I don't find the tics
Good luck on your shopping trip; may it be tic free and rewarding!
Best,
Matt
I can see your sense of accomplishment getting that round lid to actually slide. I think I felt the same way when I drilled a curved piece of deer antler for a most beautiful pipe stem that joined the awesome bowl made of the crown. Almost like Sherlock Holmes but a bit more Sam Houston. I am a box fanatic and a bit of a xenophile. I was blessed with some awesome men in my life that well I guess taught me the fine art of awesomeness. I've been threatening to get back serious with my jewelry boxes. But I've added a knew hat to my trades. So now I need to start making boxes again tho put the jewelry in I make. I'm gonna have to watch some other videos of yours. I can watch other people going about something in a way maybe a lot of people would want tp correct or ask why they didn't do it this way out that way. You clearly know there's multiple methods of deferring a felion.
Great video Matt! Great tips and awesome little project
You ever done any vids on round wood furniture joinery? Mortises and tenonses...s.... and scribing shoulders.
Keep up the good work!
One of the 17 …
Another great video… another project I’ve added to my list! Do you have a video on sharpening a putty knife by chance?
Chamfer the underside of the head of the pin.
6:04 Lichens 👍👍👍👍
Amazing work my friend but if that is sitting on my wife’s dressing table, the latch pin doesn’t really needs to be there! I’m going to try and make this but no pin
I almost bet on the pin!
21/64"? 8.3mm is so much easier to handle.
It’s A LIVE!!!! (edge log box)
What did you do with the 2 pieces that were cut off the lid? Save them and glue them back onto the lid; then the box will look more like a log.
Or... just don't cut it at all and it will look EXACTLY like a log! 😏
Matt, I know that you are very experienced using the table saw. I have a friend who was also very experienced when he nearly lost his hand in a kickback accident cutting a 4x4 on the table saw. The piece came back at him and nearly tore his fingers completely off. Please be very careful using powerful equipment!!
Are you going to show how you did the second box?
You can also use masking tape and supper glue if you don't have two sided tape
Instead of double stick tape ($$$), why not painters tape on either surface and CA glue to join them?