The best adjustable dumbbells for 2024?
HTML-код
- Опубликовано: 7 сен 2024
- Eisenlink - Better than Peppin, IronMaster… even better than Nuobell and Snode? Check and find out more about these adjustable dumbbells…
I hope you enjoy the video and thank you for watching.
Thumbs Up, Pinkies Down my friend! 🤙🏻
If interested in purchasing, please consider using this affiliate link to the Eisenlink store:
amzn.to/3TaFVsw
I was going to purchase the Iron masters until I watched your honest, and detailed video . Shortly afterwards I purchased the Eisenlinks.Thanks for a job well done.👍🏼
Hi. I’m glad the video helped in your decision making. Thanks so much for watching!
Dude, this was the most simple yet comprehensive overview about this dumbbell. I am buying it. Many Thanks
Thank you. I’m glad the video helped in your decision making process. Good luck in your fitness journey!
Thank you so much! I bought a set yesterday.
Thanks for watching. Cheers!
Thanks, really helpful video. No other comprehensive overview of these online, so far as I can tell!
Thanks. I’m glad you found it helpful and appreciate you for watching!
@@123.MikeCheck Quick question: given the way the weights slot onto the sleeves, do you think if you turned them upside down when fully loaded they might potentially slip out? I'm worried about them being above my face when benching and not being secure. Thanks again.
@@charleslawrence7327 Hi there. Many apologies for the delayed response. Assuming the weight of the dumbbell does not exceed it’s listed capacity, I think that as long as the set screws are seated into the plate in front of it and the locking pins are tightly secured, I would feel comfortable with pressing movements, even if held upside down. I hope this helps. Pls let me know if you have any other questions. Thanks!
@@123.MikeCheck ordered mine earlier today. Cheers mate!
@@charleslawrence7327 Nice. Here’s to your gains!
Thank you for the video. Very informative. I was not even aware that these existed. I've been out of the market for a while. Great video.
Thanks for the kind words. I hope you keep us updated with the equipment you add to your setup. Thanks for watching! 🤙🏻
I will def update. Again, thank you.
Thanks for sharing. Ive been eyeing this sets for a while now. Im not 100% convinced but for the price, the amount you can load and the somewhat easier load/unload makes them very appealing.
It took me a while to pull the trigger on these. But I’m glad I did and am happy to help in your decision making process. Let me know if you have any questions.
carefully read the amazon review before you buy them.
The cons eh... are acceptable. Was thinking about Iron Master but thanks to your video I'm getting these. Thank you sir.
Sweet! I’m happy the video helped in your decision making process. Thanks so much for watching!
@123.MikeCheck received mine today. Had to come to work, so tomorrow I will use them.
Cheers. Keep making more videos!
Thank you! I’m new at this so trying to get better. I welcome any feedback to improve, so feel free…. Cheers!
Those look good . I love my ironmasters with the heavy handle kit the balance is much better. And they have a whole ecosystem behind them.
The plate changing system is not that slow when you master the process. Having said that the repxpeppin blow all of them out of the water. Gonna get em when they come out
I also considered IronMasters. But due to my location, shipping costs put the price out of my reach. The RepXPeppin looks sweet but Rep does not ship to me so I’m out of luck again. I appreciate you watching!
@123.MikeCheck the eisenlinks are good too plus the price is really good. By the way, where are you located?
@@roninwarrior216 Hey there. I reside on Maui. 🤙🏻
Sorry to point out the obvious but the 2 1/2 pound plates have the two side cutouts in the plate where the 5 pound plates are solid. Great review though. I like what I see and these are now on my wishlist.
That is a great point! I honestly did not notice that 🤦🏻♂️. Thanks for watching and for the added insight!
Solid video and review. These dumbbells really seem like a great option for the home gym enthusiast!
Indeed, these are a very solid option and recommend them highly. Thanks for checking out the video!
Thanks I've been looking at these vs the iron masters and right now on their site a pair of 80s goes for around 500 vs iron masters are 700 for a pair of 75s I think
carefully read the amazon review before you buy them.
Very true... I would encourage everyone to review comments from other sources to make a well informed and educated decision. Thanks again for taking the time to watch.
I too considered Iron Masters but their shipping cost to my location is ridiculous, which I why to chose to go with the Eisenlinks. Thanks so much for watching!
I just purchased these do you know if and when the longer pin will be available or is it in development?
Hi there. The long locking pin is on the market but looks like it's out of stock on Amazon and Eisenlink's direct site (as of Apr 24, 2024). I've seen it become available but these pins are growing in demand so they sell out fairly quick. When they do become available, I hope you would kindly consider using the affiliate link in the description. Thanks for watching and let me know if you have further questions.
Thank you so much for the input
How are you storing your plates? I like the design of everything except the plates. They're a pain to store without the 1 inch hole.
Hi. Not sure if you saw my follow up video of the 30lb expansion kit. I did a quick unboxing which showed a foam insert that it shipped in. For now, I’m using those foam pieces to store unused plates on the bottom shelf of my dumbbell rack. Hope this helps. Let me know if you have further questions. Thx for checking out the videos!
Are these safe to use holding them vertically doing something like a skulls crusher or goblet squat?
I think those types of exercises should be ok. But I would recommended staying under 80lbs (unless you have the longer locking pins). Hope this helps. Thanks for watching!!
Is it possible to add more weight to the dumbells? E.g. 2 more 2kg plates to make it a 40kg dunbell?
The most I could get onto one dumbbell is 95lbs or about 43kg. But keep in mind that at this weight, only a small portion of the locking pin is engaged with the handle. Without a longer pin, I would stick to deadlifts, shrugs, rows. If there is enough interest, I can do a part 2 video, discussing/showing maximum capacity. I hope this helps and thanks for watching!
@@123.MikeCheck thanks for the prompt reply! Another video would be highly appreciated :)
During research regarding the dumbells I found Out that there is an extension available, but unfortunately only in the united states and not in Europe, at least so far.
But if~40kg is possible without the extension i think iam going to buy these dumbells nonetheless.
Ok, I'll work on part 2. Cheers my friend!@@maxkuhn4345
Do you have any concerns about the set screws coming loose or shearing off?
I think the screws would hold under normal use. It seems like the screws (hex head) are replaceable. I’ll check and get back to you. Thanks for watching! Let me know if you have any feedback or other questions.
Hi. I checked and the 5mm hex head screws are removable. It would just be a matter of finding the proper replacement screws. Thanks.
Thank you so much for your replies. Definitely will be picking up a set soon!
Are they droppable?
These are durable enough to be dropped from a reasonable height during normal use. Having padded floor covering helps too. I personally do not have any concern if they are dropped. Hope this helps. Thanks for watching!
@@123.MikeCheck Thank you! How about the knurling as well, more passive or aggressive?
@@john.paraiso Hi. The knurling is definitely more on the passive side. But to me, it’s still better than having the rubberized style of handles. Let me know if you need anything else. Thanks!
@@123.MikeCheck Thank you! I have the Bowflex 552s right now and I'm looking for an upgrade so they may be a contender
@@john.paraiso Good luck. I’m curious to learn which direction you take. I hope you provide an update when you make a decision
Have you seen the new Rep x Pepin dumbbells? They look SWEET, but not for me. Rep does not ship to me. Cheers!
Based on Amazon reviews, this is horrible product. The weights of the handle, end screws and plates are not as described. Even worse, the end screws can not be securely tighten and injure one of its users.
Yeah, I read that review as well. I pray the person is ok. Thanks again for watching and the comment.
I see some reviews from amazon, complaining incorrect weights of the handle, end screws and plates. what do you think?@@123.MikeCheck
The locking screws on my set works fine and is solid. I don’t have a manual scale so have not had a chance to weigh each plate and handle. I’ll get back to you with an update. Thanks again for the comment.
thank you for your answer. Can you weigh the whole thing to see how close it come to 50 lb when everything is put together?@@123.MikeCheck
I’m working on a follow-up video which will feature the weight accuracy. I hope to have it posted soon. Thanks again for your comment.