I liked very much your videos because you explains what you're doing and you don't skip the process (what is awesome because the people who want to learn it can't)
Awsome build. How did it feel with the 37s on it would think it would have made a mess of the gearing. Had tonchange my d1 dif ratio to 3.9 when i fitted 35's to it.
Great video, I’m looking forward to the next episode & am hoping you show us fitting the a-frame nudge bar as I’m thinking of putting one to my defender.
Hey! I’m considering running 35/12.5/16 on my 90. I’m going for a 2inch lift but hear a lot of chatter online about needing a 1.2 transfer box and then adjusting the diff gearing to 4.75s - do you think this is the case and needed to run the 35’s or shall I just run them and see what happens before spending more cash on areas that might be ok. Cheers in advance
Great work and channel! I followed you from the beginning and I love it ❤ Could you share (as you did earlier 😉) the liste of changed parts as I come from an other country and it’s hard to order something here !!!🙏 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Great video's only a dream to do this hard to get a defender so clean to start with were in sunny suffolk what part of the country are you in you had loads of sunshine to work outside as long as you have all the best mark
Great content and production values - but your audio is all over the shop ! You need a collar mic so we don’t have to bump volume to hear your wisdom 😃 Keep the vids coming pls 👍
Well done mate, great video, looking forward to seeing this one done. Can you DM us on insta the suspension setup you put on? Looking for a decent enough but not mad expensive 2inch lift for our 110 project. Looked like mainly Terrafirma kit going on there, am I right?
@@alexanderadkin3303 I just prefer the 110 and the spectre 110 is personally really good how it is and the proportions look just right in my opinion so the shorter wheel base makes the 90 look too tall in relation to its length
even if your defender will look good .... I cannot have respect for a man living in afarm and keep his dog in a cage .... instead to love you so much .. maybe you could start to treat him better .... I have a TD5 ... and a dog ... and I treat my dog better than my car ... you should look at your dog .. have a seat .. and start to look at somebody else than YOU ...... sorry if you donn't like my comment but open your eyes ...
Mate think about the work hes doing and the dogs safety ya daft twat , + look it's not 1 shot an it's only seen in the cage for the first couple shots gaurentee hes taking the dog out between shots, nothing wrong with that you dont know coulda jus been on a long walk or at that time machinery coulda been moving around site. Stop being a prick n jumping to conclusions. Rant over Juice motors awesome content bud shots are really good, looking foward to more and this has the promise to be a wicked channel, my 1 criticism of the videos is the music volume, I've found that the volume jumps up with the music so maby match it to your voice level. But 100% 👍
I liked very much your videos because you explains what you're doing and you don't skip the process (what is awesome because the people who want to learn it can't)
Awsome build.
How did it feel with the 37s on it would think it would have made a mess of the gearing.
Had tonchange my d1 dif ratio to 3.9 when i fitted 35's to it.
You make your art and hard work look like fun. I love playing your videos and watching you build amazing defenders.
Makings of a great channel, top work Sam 💪🏼
Great video, I’m looking forward to the next episode & am hoping you show us fitting the a-frame nudge bar as I’m thinking of putting one to my defender.
Thanks Paul, A Bar install vid coming soon!
I was enjoying it all, right up to the point where you were wearing sliders and socks! Jeeeez. lol. Joking, loving the channel bro!
Have you considered stronger half shafts? Changing ratio of drive train Gearing?bigger calipers? Is 37s street legal in UK?
I like our unboxing and nice part for defender cheerss
I found the TF kit, I am goin to upgrade some components but what is the pn for the springs and spacers plz?
You guys are an inspiration, please share with me where to get like such
Awesome video! looking forward to the next one :)
You are doing perfect work , well done!!! Can you please tell me how much did the new parts cost in the end?
Hey! I’m considering running 35/12.5/16 on my 90. I’m going for a 2inch lift but hear a lot of chatter online about needing a 1.2 transfer box and then adjusting the diff gearing to 4.75s - do you think this is the case and needed to run the 35’s or shall I just run them and see what happens before spending more cash on areas that might be ok. Cheers in advance
Great work and channel! I followed you from the beginning and I love it ❤
Could you share (as you did earlier 😉) the liste of changed parts as I come from an other country and it’s hard to order something here !!!🙏 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Great video's only a dream to do this hard to get a defender so clean to start with were in sunny suffolk what part of the country are you in you had loads of sunshine to work outside as long as you have all the best mark
Man that's wonderful I enjoy watching this good job
What is the brand of bullbar? Thanks for answer 😊
Hey mate, where can i order the front bumper? Great job!
Where can I buy all of the parts you buy, can you list the sites and the parts please.
Paddocks are by far the best people to buy parts off. Just don't buy anything that says britpart on it
Great vid. Amazing what is possible if you have the money…and lots of it…..👍
Dream car right there
Love your vids bro!! Very informative and always nice to see beautiful builds especially 90.
Great channel mate. Love it. 👊🏻
Thank you Ed!
Any news of a new project? its been quite a while since your last motor left your new shop!
Great content and production values - but your audio is all over the shop ! You need a collar mic so we don’t have to bump volume to hear your wisdom 😃 Keep the vids coming pls 👍
Must the track rod be removed for the radius arn to come off ?
Where's the link to part 1? I can't seem to find it.
Where have you bought the tires and the rims? And also rim dimensions and offste please
WHer du you buy all this parts??????
awesome video bro , hope you can share more video about your superb defender 90
Awesome content best mechanic for landys👌🏻
HD SG 🙏🏻 Appreciate your support 💛
What sort of ball park price was it to convert it into "spectre " vehicle
Grand .....👍 put Price each parts please ...grate work..thanks ...
Ouuuuu the introoo 😍😍😍😍
Bro the music😍
Great video, but please use a guard on your grinder. Stay safe
I love this video. Thanks bro
What's the name of those rims and tires?
Just found your channel, please make a playlists
Hello sir, l need some help with my land Rover 90 short body
How many cars do you have
awesome!! keep going!!
Well done mate, great video, looking forward to seeing this one done. Can you DM us on insta the suspension setup you put on? Looking for a decent enough but not mad expensive 2inch lift for our 110 project. Looked like mainly Terrafirma kit going on there, am I right?
BUST2BUILT hi mate this is a 5” Super Lift Kit
Don't put Fox shocks on, go Koni, you won't regret it
awesome! I look forward to the end result. Just a quick tip: change your playlist mate... sounds like a RUclipsr's Vlog from the Maldives... : )
Balls of steel cutting the damper letting that axle drop Unsupported on a 2 post lift 😅😅😅
richard Squires 😅 radius arms got me
Its a shame that whilst you had access, you didnt clean and paint wheels arches, axle etc.....
Why do you keep your dog in a cage?
How much was it for all that.
Hey, nice videos, except for that flickering light. Can you message me and I will send you a new led driver so that it flickers no more.
My father has some of these items but im using his phone to comment cause he doesnt understand English but I do
13:25 Who let the dog out?
Love the channel do you have an instagram?
Petrol Head Mods @juicemotors
37's and not 6 inch springs?
No need unless flexing HARD, the kit fitted retains road characteristics so feels great to drive!
@@juicemotors fair enough i always compare every thing to the off roading i do so lots of flex ect haha
Spectre had a defender 110
and...
"Inspired"
Try looking it up in the dictionary numpty
@@alexanderadkin3303
I just prefer the 110 and the spectre 110 is personally really good how it is and the proportions look just right in my opinion so the shorter wheel base makes the 90 look too tall in relation to its length
Spectre uses a 110
Hence the title.... “INSPIRED”
Great build but not very original, why not be more imaginative and build a one off vehicle ?
Might fit square wheels to my next build 😂
اكو عرب
Great vid, shame about the tedious music
even if your defender will look good .... I cannot have respect for a man living in afarm and keep his dog in a cage .... instead to love you so much .. maybe you could start to treat him better .... I have a TD5 ... and a dog ... and I treat my dog better than my car ... you should look at your dog .. have a seat .. and start to look at somebody else than YOU ...... sorry if you donn't like my comment but open your eyes ...
Mate think about the work hes doing and the dogs safety ya daft twat , + look it's not 1 shot an it's only seen in the cage for the first couple shots gaurentee hes taking the dog out between shots, nothing wrong with that you dont know coulda jus been on a long walk or at that time machinery coulda been moving around site. Stop being a prick n jumping to conclusions. Rant over
Juice motors awesome content bud shots are really good, looking foward to more and this has the promise to be a wicked channel, my 1 criticism of the videos is the music volume, I've found that the volume jumps up with the music so maby match it to your voice level.
But 100% 👍
WHer du you buy all this parts?????