The GSA r1200 has to go to the dealer because you have to reset the computer after every service and also it voids your warranty so even the simple stuff is best left to them until your warranty is up
Goon Rides, sadly those ugly orange markers are mandatory on your bike in Europe :( But I don’t think police would care if you had them or not, but just in case.
100% agree. Shoelace stuck on peg hits me deep ... I just got a new Mt10, front and rear axle sliders, full gb racing cover kit, frame sliders, etc. Not again lol
I rode like 2 years on my ZX6R before I put frame sliders on it because I hated the way they look I’ve gone down twice since I installed them and they have literally saved the bike both times. They are a great investment because replacing 1 slider is way cheaper than an entire side of fairings.
Also has a huge downside though .. In a higher speed crash they can bent your frame if they get caught on something while sliding, totalling the bike instantly
Did you put thread lock? I would advise to put some on all bolts as due to vibration and heat they might get loose and fly away - talking from experience. I was also wondering why you never adjust (or at least we don't get to see/know if you do) your suspension. You are a tall guy and I bet you are around 80-90 kg? You should check the rebound and the sag of the motorcycle with your weight on + where the front forks bottom out as I saw on one of the parts in the video you were traveling a lot with the forks (at least it seemed like that by the marks on them). You should definetley adjust your suspension everytime you have a new bike since the bike is out of balance - no universal settings for all!
Yep, I use loctite when it needs it (all bolts in this vid except fairing bolts). As for suspension, I have it done professionally at the first track day I do with a bike.
Love the vids, good idea with the protection for a new bike. I just wish that sliders didn't cost so much. Little metal or composite plates with a few mounting holes for $100+
Purchased my first motonosity key tag. Wanted to support a guys who makes awesome content. Also low key hoping there’s free shipping to Canada and I don’t get surprised with a bill once it arrives haha. Keep up good work man
Love this bike!! (I have the single R and it's such an incredible machine). I did some T-Rex protection on mine, but I like the Evotech as well. Great grip strength 😆hangin' on while going that fast. I can't even imagine the pull. Great Vid. 👊🏽. (40% off... 👍🏼, time for a new horsepower t-shirt).
thx brent, you just gave me a new thing to fear:/ getting my laces stuck to my left foot peg. i dont think ill ever be able to ride again with that in mind;(
I ended up getting the XWorks flash on my 2020 M. I'm so happy to get rid of the flat spot. I also went with the full titanium Motogp Akrapovic exhaust. Really sound good.
Yeah I put them on right before I sold it. I had womet tech ones on there before but swapped them onto the R3 when I was building it and just left them on.
Hey motonosity, have you ever thought of workin with miami manny fro motomilliin? his sight is completely awesome and it’s got literally all parts and stuff you were liking for and MORE from you mod plans video....650ib’s always repping then, and for good reason!
Another mod is to go with a lighter chain and sprocket yeah sure they don’t last as long but with all of that weight being lost the engine is going to wrap up so much happier and you’re gonna have a lot faster time and a good time as well as new wheels LOL
We have found that the hexagonal pattern in the Evotech radiator guard has not had any impact on the overall bike operating temp. The airflow is still fantastic.
![CARBON BELLYPAN! [BMW S1000RR Full Carbon Install Part 2]](http://i.ytimg.com/vi/OmoG6KOCO44/mqdefault.jpg)
I like when I see people that can work on their own bike/car and not taking it to a mechanic for every little thing
Sry to burst your bubble but this hardly even classifies as bolting shit on, no hate but yea...
The GSA r1200 has to go to the dealer because you have to reset the computer after every service and also it voids your warranty so even the simple stuff is best left to them until your warranty is up
@@AntaresSQ01 watch his previous videos .. he does every thing himself
Get rid of those nasty orange reflectors
I was thinking that while editing lol
@@motonosity haha
Goon Rides, sadly those ugly orange markers are mandatory on your bike in Europe :(
But I don’t think police would care if you had them or not, but just in case.
Laithal yea, its not like they’re gonna write you a ticket for it.
Maybe a cop that’s hopelessly bored will but the odds are minimal.
100% agree. Shoelace stuck on peg hits me deep ... I just got a new Mt10, front and rear axle sliders, full gb racing cover kit, frame sliders, etc.
Not again lol
I rode like 2 years on my ZX6R before I put frame sliders on it because I hated the way they look I’ve gone down twice since I installed them and they have literally saved the bike both times. They are a great investment because replacing 1 slider is way cheaper than an entire side of fairings.
Also has a huge downside though .. In a higher speed crash they can bent your frame if they get caught on something while sliding, totalling the bike instantly
Gandalf with an AK-47 they are mainly for low speed mishaps tho. Nothing is gonna save the bike at high speeds anyways
@@mooiboyace wont the higher speed crash total the bike anyway?
The bike is so nice can’t wait to see more.
I legitimately love this bike. I got one a week ago in black and these mods are very useful.❣️
Fender eliminators are always my number 1 first mod....them stock jobs are hideous!
Did you put thread lock? I would advise to put some on all bolts as due to vibration and heat they might get loose and fly away - talking from experience. I was also wondering why you never adjust (or at least we don't get to see/know if you do) your suspension. You are a tall guy and I bet you are around 80-90 kg? You should check the rebound and the sag of the motorcycle with your weight on + where the front forks bottom out as I saw on one of the parts in the video you were traveling a lot with the forks (at least it seemed like that by the marks on them). You should definetley adjust your suspension everytime you have a new bike since the bike is out of balance - no universal settings for all!
It’s electrically controlled
brandon lim only the front forks and you can still adjust it as to rebound. The rear shock is not electrically controlled - the sag of it etc.
Yep, I use loctite when it needs it (all bolts in this vid except fairing bolts). As for suspension, I have it done professionally at the first track day I do with a bike.
Love the vids, good idea with the protection for a new bike. I just wish that sliders didn't cost so much. Little metal or composite plates with a few mounting holes for $100+
I wish aftermarket suppliers the best of luck trying to figure a damn solution for that fender eliminator...
Evotech already makes a pretty clean one that I've been thinking of installing. Also hoping TST comes up with a cool tail light solution
"in your garage and you lay the bike down..." Can confirm, it did not feel good...bought the bike 2 days prior...didn't even have 300 miles on it.
its that fame sliders protecting the fairing? looks like is too short
Purchased my first motonosity key tag. Wanted to support a guys who makes awesome content. Also low key hoping there’s free shipping to Canada and I don’t get surprised with a bill once it arrives haha. Keep up good work man
Thanks man! If it was just the one keytag, it should get to you for free ;)
It’s nice to see you don’t have drill any holes in the body panels to get the frame sliders on
It's almost like they designed the bike with that in mind!
The rare case where engineers actually did something right 😂
@@Need4SteveMoto The crew at Evotech are very engineering focused. Its a UK company with an amazing production facility.
Hot damn that bike is fast. Thank god for that ecu flash.
It just GOES at any speed, any gear. So much fun
@@motonosity It's my dream bike!! I'll be there some day.
I just removed my orange reflectors after finding out it was stuck on there by 3m tape. Looks so much better.
Jr Cruz same here, one of mine started coming off anyway so I just took them off. Massive improvement
A video about protection... nice😏
👌👈💦
I really like the stock mirrors
Gonna have my first bike for the upcoming summer just prepping myself 😏😏
Wow, BMW made it so easy that you didn’t need to remove the fairings for the frame sliders!
They are very easy to install!
Your camera is awesome 🔥
been waitin for this!!
Love this bike!! (I have the single R and it's such an incredible machine). I did some T-Rex protection on mine, but I like the Evotech as well. Great grip strength 😆hangin' on while going that fast. I can't even imagine the pull. Great Vid. 👊🏽. (40% off... 👍🏼, time for a new horsepower t-shirt).
You put this up because of walter🤣 glad hes ok the video was epic
Bring that dang bmx bike back out bro
Is new merchandise coming out then ?
I ordered everything on this video, can you please help out with the tq spec ? Thank you
Awesome video! Glad you are protected!!!
Cant wait for fender eliminator, exhaust and also the mirrors
What setup do you have for go pro to make it so clear while you’re riding?
O M Shit , one of the best things you can do to a sport bike is take off the passenger pegs. Your bike is sexy Yo. Hahaha
1st gear got you all the way up to 92mph?😧 9:20-ish is what I’m referring to.
In the US are you able to register the bike for a single rider (no passenger)? Here in Australia you can and it saves a bit of money.
There's no such thing as registering a bike for number of passengers in the US
Hi sir,
How many Nm of torque you applied for the frame slider?
Hey man, love the videos! Is there a certain torque wrench you prefer? I can never get a look at what it is
Evotech is quality. Worth looking at their tail tidy too...
Totally agree!
When is the exhuast coming lol 😔😔🤧🤧
When's the top speed run? You've been teasing us lol
needs the exhaust
What tools did u use for the frame slider?
What torque spec do you use on the wrench for the bolts that don't have specs? (I.E. your fairing bolt)
thx brent, you just gave me a new thing to fear:/ getting my laces stuck to my left foot peg. i dont think ill ever be able to ride again with that in mind;(
Double knot and tuck em into the laces!
Pants leg can catch too
@@thezombiesproject1675 easy solution. Ride with no pants
Honestly I feel like that would be amazing
Be honest you saw walterrific crash and immediately got scared and put protection on your bike 😆😆
Morale of video... life is better with protection lol
so true ;)
Damn, doesn't sound like the blue reservoir covers are coming back. You ever run the shogun sliders?
There is something about watching this installation, it gives you a sense of fulfillment and completion. ZEN Life ✌🏻
Moto... is this a roundabout way of saying "zen and the art of motorcycle-maintenance"?..
@@relativetruth8889 Rightly so my friend
I don't know anything about superbikes etc. but don't you need to press cluth when shifting? Pce
The front reflectors are on with double sided tape. Easy to remove, looks way better.
I thought so! Def will remove em
I ended up getting the XWorks flash on my 2020 M. I'm so happy to get rid of the flat spot. I also went with the full titanium Motogp Akrapovic exhaust. Really sound good.
top speed attemp soon ? ;)
Where is the 300cc grom?
You had EvoTech spools on your R6 ... ?!
Yeah I put them on right before I sold it. I had womet tech ones on there before but swapped them onto the R3 when I was building it and just left them on.
sitting down for this now.... :)
Ay what's up man!? Hope you've been good!
@@motonosity Not bad, Not bad. Bikes down, so I took a spin with you....My butt is still puckered. ;)
Take it to Circuit of America’s!
Great video and a great guide.. 👍🏻
Hey motonosity, have you ever thought of workin with miami manny fro motomilliin? his sight is completely awesome and it’s got literally all parts and stuff you were liking for and MORE from you mod plans video....650ib’s always repping then, and for good reason!
good sight eh? hehe
wait...now this is epic
Why ecu flash and not power commander 5?
Could we see wheelies on this channel?
Another mod is to go with a lighter chain and sprocket yeah sure they don’t last as long but with all of that weight being lost the engine is going to wrap up so much happier and you’re gonna have a lot faster time and a good time as well as new wheels LOL
Yeah I'll be doing a 520 aluminum conversion. They actually have pretty great longevity from my experience
The bigger question...... WHAT IS YOUR FAVORITE TORCHY'S TACO???
Love the bike
5:00
Damn he really said ain’t no bitch getting on my bike
can you post theese videos on 60fps
Ya all moto videos should be 60fps.
Lol the shoelace fail is the worst!!
Just bought a 98 GSXR600, and good websites for parts other than eBay and OEM websites?
Maybe revzilla?
@@GravyBoat Maybe MotovationUSA.com ;)
Just bought an MT-09. Was Bren turning flash worth it or should I go with a pcv?
Definitely worth it, but they don't do Japanese bikes. I use Bauce Racing for that!
@@motonosity oh ok thanks
Bren tuning is the best for that s1000rr and it is not expensive.
Some GB Racing engine guard should do it.
Ride safe bro
How about I bring my G310R out there and we swap for fun? Just saying. Lol
Awesome vid mi-guy...know where to bye my mods for mine 👍🏾💯💪🏽🔥
bye
Mi- bad I meant purchase
@@DaOneDaOnly72 how about MotovationUSA.com ;)
Damn man when are yiy gonna do up the garage like your old house shit
We've got some pretty big plans but have been focusing on less exciting but necessary things first lol
TITANIUM FULL EXHAUST SYSTEM PLEASE!
torque wrench on the lift spools?..jeesh
I've broken far too many bolts at this point not to **flexes**
Definitely fuckin slipped while backing my bike out today and chose my back over the bike 😅. Ironic....
Damn near daily 200
Eco tech = trash impachtech=gold
Mmmmmmm fressshhhhhhhh
Hello, i love your channel but i want grom content
It's coming! I'm getting shop space set up to film in
James Orend nahhhh
My dad uses skate wheels lol
Track it
nice
get rid of those stock mirrors.
top 5
Hello from spain
¡Oye!
Tatan 05 hello
Please give the S1000RR away after you’re done building it 😭🤣
Sorry, this one's my baby lol
Motonosity 🤣
Radiator guards? I would rather maximise air flow/ cooling... bike is awesome. Those pulls at the end 😬
We have found that the hexagonal pattern in the Evotech radiator guard has not had any impact on the overall bike operating temp. The airflow is still fantastic.
I"am fom viet nam helo you
Who wears laced shoes riding? Yikes
right?! flip flops are better cuz they don't have laces.
@@gwot or maybe, motorcycle shoes
@@06MoeJoe naaww can't risk it, some motorcycle shoes have laces too
first comment
Devon Mero sorry it was me thou