Hi Boss, in your other video, to access the solenoid for cleaning we unscrew the metal nut but for this design, it is black plastic capping, how do we remove the plastic to clean the internal parts?
If the solenoid part is the same spec with the original specs,you can replace that,but not at the bubble counter area,you should replace it at the bottom area where the original solenoid position is located.
Hello buddy, I want to know two things: does this solenoid regulartor sound like a click when we turn on the switch? and can I de-attach the solenoid regulartor if I don't want to use that?
Yes there is a click. If you remove the solenoid,you still can't use it manual way. Instead you should get those CO2 regulator without solenoid function
I recently purchased this exact regulator, however the solenoid valve keeps on acting up. When i plug in the power plug, half the time the solenoid switches on and let’s the co2 through, however the other half of the time it just doesn’t turn on like it should. Same goes with the solenoid switching off and stopping the co2 when i unplug the regulator from the powerpoint. The regulator set has only been used for 4 days so it should not be doing this. Any suggestions?
Hi. You can follow this link and try to solve it. Possibly the spring valve mechanism is not in the right position. ruclips.net/video/LpypTpChXJQ/видео.html
Hi there. Gasket is consumable. If you can't get it locally,you can contact our whatsapp hotline(+601123269699) to ask for shipping cost to your address.
I don't think so. They have only 1 needle valve to control. Unlike the chihiros regulator they have one main valve to regulate the pressure coming out from co2 tank,and another needle valve to control the output gas out from regulator
@@shrimpoly3337 thanks for your comment response (instead of the seller), haha! (But I'm also your regular customer lah). Actually it can't, because if we only use bare hand to tighten it, the gas will leak from there (high pressure), and the regulator head will be very loose. I learned a lot about plumbing yesterday night because of this. I rush to Mr DIY a few times to buy a few sizes of adjustable wrench (spanar), but I failed to get the job done.. instead, I make things worst by severely scratched the regular. In the end I get back to Mr DIY to get a "universal wrench" with "slim tip", then only I can tighten up the regulator. Moral of the story, you really need a thin type universal wrench 🔧 to tighten up the host. Otherwise we need to use other accessories to get things done.
@@derekw9358 perhaps the size matching your cylinder has some slight offset?normally when you install it to your cylinder it should be smooth and easy to screw with hand. If you feel kinda of tight when screw just a little bit and could not fully install it,could be size issue.
@@shrimpoly3337 perhaps, it means that we might need to get some accessories to fit in the host size...such as Sodastream Cylinder to W21-8 convert adapter?
@@derekw9358 depending what cylinder you have. If you are from kl klang Valley you can contact our hotline 011-23269699 and visit us,we can help you check and also guide you how to verify. Then you become a master like us. 😁
Hi Boss, in your other video, to access the solenoid for cleaning we unscrew the metal nut but for this design, it is black plastic capping, how do we remove the plastic to clean the internal parts?
Using spanar can easily remove it.
Is this can be fitted for face up ISTA co2 cylinder ?
Hello! I have to ask, my co2 output pressure guage is currently below 60 or is at 0.4
Is that normal for a 2L fire extinguisher set up?
Update, it jumped to 110 or 0.7 overnight… even when it isnt active.. i only pressed the fire extinguisher halfway
Is the bubble counter able to be rotated for CO2 cylinders that have valves on the top?
No
Can i just unplug ori solenoid and replace with dc12 solenoid through bubble counter area ?
If the solenoid part is the same spec with the original specs,you can replace that,but not at the bubble counter area,you should replace it at the bottom area where the original solenoid position is located.
Hello buddy, I want to know two things: does this solenoid regulartor sound like a click when we turn on the switch? and can I de-attach the solenoid regulartor if I don't want to use that?
Yes there is a click. If you remove the solenoid,you still can't use it manual way. Instead you should get those CO2 regulator without solenoid function
I recently purchased this exact regulator, however the solenoid valve keeps on acting up. When i plug in the power plug, half the time the solenoid switches on and let’s the co2 through, however the other half of the time it just doesn’t turn on like it should. Same goes with the solenoid switching off and stopping the co2 when i unplug the regulator from the powerpoint. The regulator set has only been used for 4 days so it should not be doing this. Any suggestions?
Hi. You can follow this link and try to solve it. Possibly the spring valve mechanism is not in the right position. ruclips.net/video/LpypTpChXJQ/видео.html
My MuFan regulator is leaking through the output knob. The reason is that the two gaskets are defect. Where can I get this gaskets?
Hi there. Gasket is consumable. If you can't get it locally,you can contact our whatsapp hotline(+601123269699) to ask for shipping cost to your address.
Can this be considered a dual stage regulator? It will still experience the tank dump syndrome right?
I don't think so. They have only 1 needle valve to control. Unlike the chihiros regulator they have one main valve to regulate the pressure coming out from co2 tank,and another needle valve to control the output gas out from regulator
Do we still need to install check valve?
Recommended to use if you want to provide a 2nd protection barrier.
Im about to buy this and use it on a co2 extinguisher. Will that be alright?
Yes. Make sure the cylinder connection and volume is within the solenoid support specification.
@@shrimpoly3337 thx a lot. Im going to use it on a 4 or 5 kg co2 extinguisher. Is that ok. Also where can i find those specifications
Is it suit for insta co2cylinder 1liter side up?
Yes can if the ista cylinder valve size is w21.8.
Really bad design... We really need to struggle to get a slim type of wrench just to get it done
Actually don't have to use wrench to tighten up. Using bare hand is good enough to install.
@@shrimpoly3337 thanks for your comment response (instead of the seller), haha! (But I'm also your regular customer lah). Actually it can't, because if we only use bare hand to tighten it, the gas will leak from there (high pressure), and the regulator head will be very loose. I learned a lot about plumbing yesterday night because of this. I rush to Mr DIY a few times to buy a few sizes of adjustable wrench (spanar), but I failed to get the job done.. instead, I make things worst by severely scratched the regular. In the end I get back to Mr DIY to get a "universal wrench" with "slim tip", then only I can tighten up the regulator.
Moral of the story, you really need a thin type universal wrench 🔧 to tighten up the host. Otherwise we need to use other accessories to get things done.
@@derekw9358 perhaps the size matching your cylinder has some slight offset?normally when you install it to your cylinder it should be smooth and easy to screw with hand. If you feel kinda of tight when screw just a little bit and could not fully install it,could be size issue.
@@shrimpoly3337 perhaps, it means that we might need to get some accessories to fit in the host size...such as Sodastream Cylinder to W21-8 convert adapter?
@@derekw9358 depending what cylinder you have. If you are from kl klang Valley you can contact our hotline 011-23269699 and visit us,we can help you check and also guide you how to verify. Then you become a master like us. 😁