YAMAHA EAD 10 V2 0 + Zildjian L80 Review/Sound Demo

Поделиться
HTML-код
  • Опубликовано: 18 сен 2024
  • YAMAHA EAD-10不用多说了,鼓手装备中的爆款,‘鼓玩’第130期用Zildjian L80静音镲搭配REMO Silentstroke鼓皮创造了在家练鼓的可能,去年底YAMAHA更新的EAD-10 V2.0以及为静音鼓打造的新音色,使得静音鼓可以改成电鼓。疫情期间,身边已经有很多朋友用的很嗨,但针对如何组建和音色试听的视频还没看到,所以本期以此为主题,是噱头还是高科技?视频分解。
    补充说明:
    4鼓连接方法: 将原先EAD-10的AB线中的A留空,接入底鼓触发器,军鼓接34,T1接5,T2接6. 5鼓连接方法,将原先EAD-10的AB线中的A留空,用Y型线(1个立体声TRS分成2个单声道母口)接入12,其中L对应底鼓触发器,R对应T2,军鼓接34,T1接5,T3接6.
    2.为了改善灵敏度,网皮适当需要调紧。
    3.音色升级非固件升级,恢复出厂后会消失。
    4.原厂设定底鼓双击会漏音,Menu-Trigger-Pad Type-RejectTime从原始113ms到60ms甚至更小可以解决。
    5.为减少底鼓网面的震动,可以在鼓腔内塞枕头
    6.为镲片的音量平衡,4鼓Ride可能会较响,5鼓配置会更平衡。
    7.所有Tom和军鼓都不拆底皮,同时军鼓上鼓簧,可以增加真实感。
    8.使用下来最扰民的是军鼓边击,送邻里一曲有节奏的切菜声。
    9.为了直出音质,所以本期画面和录音声像是相反的。
    最后再次感谢宁波瑞麟付老师提供的网面鼓皮和双踩达芬奇给予的可行性灵感。
    完成本期视频用到的设备 套鼓:YAMAHA Maple Custom 10 14 20 军鼓:TAMA SIMON PHILLIPS 12 硬件:YAMAHA HW-3 镲:Zildjian L80 鼓皮:Remo Silentstroke 踩锤:YAMAHA FP9D 直驱 鼓棒:汉旗 ’Pipa‘ 鼓组录音:YAMAHA EAD-10 监听耳机:Zildjian 配音:Zoom L-20 配音话筒:Sennheiser MKE600 视频录制时间:2020-07 录制地点:上海

Комментарии • 17

  • @JesusRiveraPercusion
    @JesusRiveraPercusion 3 года назад +1

    GREAT! You resolve my doubts!! Cymbals sounds ok for low volume but can you use regular cymbals? EAD 10 is basically a drum module!

    • @pipa6309
      @pipa6309  3 года назад

      Sorry,I dont have a good neighbour :》

  • @marcelobsteil6593
    @marcelobsteil6593 8 месяцев назад

    Hello! Nice video. Did you need to connect other one trigger on bass drum like DT50K or you just used the own bass drum EAD10 mic/sensor?

  • @gorgom6089
    @gorgom6089 Год назад

    Hi... I have one question, are you using Android or iOS to recording video? I mean, what type of smartphone that connected to ead10 ??

  • @drum7989
    @drum7989 2 года назад +1

    I have low noise cymbals too and a Yamaha Maple custom absolute with sizes: 8,10,12,14,16,22. I’m thinking about meshing and triggering the toms and using the new Dtx Pro module because of the many inputs..then I’ll record the cymbals with two condenser microphones connected to a mixer, to which the dtx module will be connected too. Do u think this setup could be a good idea?

    • @pipa6309
      @pipa6309  2 года назад +1

      I think if you want keep low volume,that‘s ok,if you want high quality,use regular Cymbal ~

  • @TonyGellaDrums
    @TonyGellaDrums 2 года назад

    Thank for post.. i will made same with my kit.. Do you try download samples? I need more info about.. Can you also show your cables for all connections.. i have Ddrum triggers and will using it.. Not sure mash or regular heads. Maybe, like i do before- tune regular drumheads to same closest note of module sounds, and just layered it with triggers to more power.. thank for video

    • @pipa6309
      @pipa6309  2 года назад

      I tried make own drum samples in YAMAHA DTX10 Video,but,EAD I didn't try, because the natural Sound is quite Loud。For the Connections,you can visit the YAMAHA Official website,and download the Reference Manual。

  • @paulhunter2001
    @paulhunter2001 2 года назад

    Hi there I notice that you have an electronic kit in the background, what do you prefer for practice the ead 10 and low volume cymbals or the electronic kit and why, thanks?

    • @pipa6309
      @pipa6309  2 года назад +1

      in my opinion,if you already have a nice acoustic drum kit,ead 10 and L80 cymbals will make this kit more useful,if not,E-drum is better。

  • @user-py5dn8yd9s
    @user-py5dn8yd9s 2 года назад

    请教老师必须要每个鼓桶加一个触发器才能达到这种效果吗?

  • @Athiest610
    @Athiest610 10 месяцев назад

    Will the inbuilt trigger in EAD10 work with mesh heads ?

  • @覺音
    @覺音 2 года назад

    还是有缺点啊,镲片不能识别