Best video on this I've seen, good thinking on making cutouts for draining, even if it doesn't do anything, it's peace of mind knowing h20 isn't sitting in there long.
You can also drill holes in the louvers to add mounting kits so you can screw it on and it’s easier to take off when you want to clean it but it uses the same 3M double sided tape
Works great no issues at all. I cut the 3m tape in 3 different spots at the bottom so that the water can drain. That 3m adhesion promoter works perfect!!!
I’m thinking about installing this same kinda of louver to my dodge. How is your experience with it so far? As far as the cleaning and the louver staying it on. Would you recommend it?
Sorry for delay bro, did you ever get the louver? Mine has been on a year now no issues yet. But it was a cheaper quality so the heat did cause the louver to bend a little. I just posted a update video.
So Did the adhesive promoter touch into the 3M tape? that was already sticky? Just apply it to the sticky part basically right? I'm about to do this right now.
Just bought this very same louver and I also have an f8 green charger. I went ahead and bought the velcro too because of all the stories about them flying off at highway speeds. I see it's been 5 days since you've posted...have you hit the highway yet and are they still sturdy?
Man I’m very happy with this louver so far especially for its price you can’t beat it. Now yeah it’s only been about a week but I have hit the highway a few times even went 100 to test it. I do believe that adhesion promoter is a great enhancement for the 3m tape. But like you said the scotch Velcro has had good reviews aswell. If this fails me I’ll go that route. But I feel like the promoter is clutch if your going to just use the 3m tape. I plan to do a follow up in a month or 2.
The velcro is tough and will hold but removing the louver that adhesive stick to your window is B to remove also at some point the rear louver will slowly move down toward the trunk stopping the trunk from opening. I'm looking at other options. Hopefully using the primer and 3M will hold and not move. What I would like to know is whenever you remove the rear louver is there any mess?
Yeah. I've never heard anyone pronounce it that way. Muscle cars folks and interior designers are going nuts. At least it's a great video with zero cursing.
Haha 😂 I'm sure a lot people caught that. I noticed the moment he said it and I had the same reaction 🤔. I love how your sarcasm was so subtle you didn't even add a laughing face after your comment 😂. Funny guy this Challenger 32. Nicely done 👍
Honestly that’s exactly what it is. I’m an adjuster and in our system the back glass is referred to as the rear windshield. Although different folks from different parts of the country have different terminology. Backlite and back glass are also common terms, but most people call it the rear windshield.
Could be true. I’m a year strong with mine. A lot of my friends have lost them in less than a month. Just have to find what works. For what I paid for everything I’m happy even if it does at some point let up.
Best video on this I've seen, good thinking on making cutouts for draining, even if it doesn't do anything, it's peace of mind knowing h20 isn't sitting in there long.
Dude that Jeopardy music was awesome and I was dying cuz it was so unexpected but perfect fit. 😂
Bro if wasn't even funny
Good work I've never watched someone show the install for those.
I want to get one I just need to know if they good in the car wash?
I have an F8 too. Love watching videos with these cars. Great video! Thank you!
about to get the same one for mine. need to know if you even clean the window underneath?
Any update ? Did the 3m tape holds up ?
You can also drill holes in the louvers to add mounting kits so you can screw it on and it’s easier to take off when you want to clean it but it uses the same 3M double sided tape
The mounting kit is on Amazon for like $20
How did it hold up with the weather? Does the rain sits at the bottom of the louver?
Works great no issues at all. I cut the 3m tape in 3 different spots at the bottom so that the water can drain. That 3m adhesion promoter works perfect!!!
Can you see easily even if you have 20% tint on the back windshield?
Do you have an update video on it?
I’m thinking about installing this same kinda of louver to my dodge. How is your experience with it so far? As far as the cleaning and the louver staying it on. Would you recommend it?
Sorry for delay bro, did you ever get the louver? Mine has been on a year now no issues yet. But it was a cheaper quality so the heat did cause the louver to bend a little. I just posted a update video.
@@TheKnightLife man said sorry for the delay 6 months later🤣
@@TheKnightLife bend how bad ? .. I just ordered mine
@aspect_5412 Drake sorry for the wait😂
I want you help to install my gli Toyota window louvers
Can you put a roof spoiler on top of it
About to put 1 on my 2006 dodge charger
I know this might be too late but have you ever tried gorilla glue double side tape cuz it's waterproof
I just seen u page I looking for loauer for my jaguar x type 2.5 petrol
How did this hold up?
So Did the adhesive promoter touch into the 3M tape? that was already sticky? Just apply it to the sticky part basically right? I'm about to do this right now.
Just bought this very same louver and I also have an f8 green charger. I went ahead and bought the velcro too because of all the stories about them flying off at highway speeds. I see it's been 5 days since you've posted...have you hit the highway yet and are they still sturdy?
Man I’m very happy with this louver so far especially for its price you can’t beat it. Now yeah it’s only been about a week but I have hit the highway a few times even went 100 to test it. I do believe that adhesion promoter is a great enhancement for the 3m tape. But like you said the scotch Velcro has had good reviews aswell. If this fails me I’ll go that route. But I feel like the promoter is clutch if your going to just use the 3m tape. I plan to do a follow up in a month or 2.
I installed twice with velcro and extra tapes. Both flew off at speed. NEVER AGAIN
@@mikehunt6088 mine hasn't flew off and I've had it ever since that comment
@@TheKnightLife how’s it going now after a year??
The velcro is tough and will hold but removing the louver that adhesive stick to your window is B to remove also at some point the rear louver will slowly move down toward the trunk stopping the trunk from opening. I'm looking at other options. Hopefully using the primer and 3M will hold and not move.
What I would like to know is whenever you remove the rear louver is there any mess?
Bro my bad but wtf are u even saying I had a stroke reading that shit
Dope vid !
Appreciate that Brotha!!! 💪🏾
Velcro??????
Thinking about doing this to my challenger, did you get this off Amazon?
How did it go ? Thinking about getting one for my charger
@@adonisward40 Havnt got it yet , i don’t know if i wanna fully upgrade it, it’s only a SXT
The “low - ver”.
Lou-ver
It may be a good idea to use denatured alcohol to strip any coatings off the glass et al wax, rain x etc
What is on the black paint? Is that some type of flake?
Yeah. I've never heard anyone pronounce it that way. Muscle cars folks and interior designers are going nuts. At least it's a great video with zero cursing.
Music is way too loud, but otherwise decent advice.
Worter or water l😂
Please take that yellow crap off the front... it's not meant to stay on. Other than that good vid 👌
OK so the glass in the back of the car is called a windshield I did not know that
Haha 😂 I'm sure a lot people caught that. I noticed the moment he said it and I had the same reaction 🤔. I love how your sarcasm was so subtle you didn't even add a laughing face after your comment 😂. Funny guy this Challenger 32. Nicely done 👍
Honestly that’s exactly what it is. I’m an adjuster and in our system the back glass is referred to as the rear windshield. Although different folks from different parts of the country have different terminology. Backlite and back glass are also common terms, but most people call it the rear windshield.
The English language is very stupid but for future. It's pronounced loover. Great video it was very helpful
Lol appreciate that!!! I was Definitely saying it wrong. Glad vid was of some help!!! 💪🏾💯
DO NOT believe these videos! No adhesive will hold these things on!!! Think about it; how many chargers have you seen with louvres???
Could be true. I’m a year strong with mine. A lot of my friends have lost them in less than a month. Just have to find what works. For what I paid for everything I’m happy even if it does at some point let up.
The h/O off road charger packages come with louvers