Sabeer, thanks. Thanks again and this thanks is for helping people get educated in AutoCAD. I just started learning. Few lectures in the institute and I was told to get help on the internet. I am very happy to find you and your tutorials are more than great help to me. If these tutorials are properly placed in order of the learning sequence it would be still better. I pray to God to give you all the energy and knowledge so you will be sought after for all answers.
I really appreciate your series of tutorial in AUTOCAD. Your Tutorial have make me to be a teacher in AutoCAD which i have no previous knowledge of. Right now, i'm an instructor in a vocational school in my country Liberia West Africa, teaching AUTOCAD Drafting and Design.MAY GOD RICHLY BLESS U.
Sir insted of creating the smaller upper rwctanhgle using offset we could use the smaller rectangle and input the commands of use the fillets right sir
Thanks you man you are my lifesaver. This was my homework assignment at AutoCad beginner class. My professor didn't explain us how to use their tools. Please post more Autocad Examples!!! by the way I subscribed your channel man. You're awesome man.
Well Done Sabeer. Thank You. Can you tell me how you et to the pan cursor so quickly without using the navigation bar. Are you just typing "p" and enter that quickly?
hi, I am using autocad 2016 and when i try to click on my rectangle after selecting fillet, it only highlights one line, not four lines of the rectangle
Just right click the mouse , go to OPTIONS , Click on Display Tab , COLORS and choose 2D model space (on the left side) and change the Color to Black (on the right side)
Dear Sabeer thanks for the video its really a good start for me in particular. I have a question for you, i want to learn about how to draw elevated and underground water tanks of any capacity do you think you can be of help. I will appreciate if you can get back to. thanks once again n may God bless you
Following your tutorial, I found a problem. After creating the box, and then the Fillets, I am stuck as no center point is available when I select Line . Your Autocad shows a triangle near the center of the top line. Also, when I try to put in the line position, it measures from the Arc, not the width of box. What am I doing wrong? Using Autocad 2015 Ver. Thanks Nice videos by the way, thanks for sharing
You can download it from tutorial file section in the web site www.sabeercad.com . Just load the site scroll down on the right side you can see the tutorial files section
first i said to you thanks for your best teaching videos Mr.Sabeercad I am requesting to help me autoCAD 2D videos which completely for building designed appliances
Sabeer, thanks. Thanks again and this thanks is for helping people get educated in AutoCAD. I just started learning. Few lectures in the institute and I was told to get help on the internet. I am very happy to find you and your tutorials are more than great help to me. If these tutorials are properly placed in order of the learning sequence it would be still better. I pray to God to give you all the energy and knowledge so you will be sought after for all answers.
Thanks for your comment , interest and prayers . I will try to place them in order .
You very thorough on the subject as well as content flow is excellent. I think you are a born teacher and an autocad teacher.
Thank you so much for that motivating comment ....
very nice presentation and nice tuto
Thank u and all the best...
I really appreciate your series of tutorial in AUTOCAD. Your Tutorial have make me to be a teacher in AutoCAD which i have no previous knowledge of. Right now, i'm an instructor in a vocational school in my country Liberia West Africa, teaching AUTOCAD Drafting and Design.MAY GOD RICHLY BLESS U.
Thanks Wilton for your comment and thank God for giving me an opertunity ......
Sir insted of creating the smaller upper rwctanhgle using offset we could use the smaller rectangle and input the commands of use the fillets right sir
excellent video.looking forward for more videos from u sir..
Thank you Mr. Sabeer. I learned lot from your lectures. Thanks again. Keep coming.
You are most welcome.
VERY NICE ,THE VOICE IS VERY CLEAR MAKING TO UNDERSTAND EASILY.
Thank you ... 😊
good tutor ..am learning through your video.,thanks
Excellent tutorial sir, easy to learn.
Thanks for your comment. make the best use of channel ruclips.net/user/sabeercad
good tutor ..your with nce voice..
am learning through your video.,thanks sir
Nice way to make someone understand.
Thanks... :)
its very helpful for new students,,, thanks sir
You are welcome :)
Thanks you man you are my lifesaver. This was my homework assignment at AutoCad beginner class. My professor didn't explain us how to use their tools. Please post more Autocad Examples!!! by the way I subscribed your channel man. You're awesome man.
you keep your explanation super simple, easy to follow thanks
You are welcome :)
this is very helpfull for me..
thanx
You are welcome
it's very clear voice and very nice tutor thank you so much, sir. do you have tutor video of how to plot and print
+Herbert Franco You can watch the video on viewports in my channel . It is in Mechanical modeling tutorials
Well Done Sabeer. Thank You.
Can you tell me how you et to the pan cursor so quickly without using the navigation bar. Are you just typing "p" and enter that quickly?
Great
Thanks
Sir.. Your 3d object so useful for me.I
so kind information sir
+Hemanth Naik Bukya Best wishes ...
hi, I am using autocad 2016 and when i try to click on my rectangle after selecting fillet, it only highlights one line, not four lines of the rectangle
You should use the polyline option in the rectangle command
Super explanation thank you sir
+Karthick I You are welcome ☺
good tutorial
Hello Sir,
if i open autocad, it shows white page. how to change in black ?
Just right click the mouse , go to OPTIONS , Click on Display Tab , COLORS and choose 2D model space (on the left side) and change the Color to Black (on the right side)
i have a question ,i have windows 7 in my computer,its autocad avalable for it ??
off course
what matters is if you got a graphic card and enough computing power and speed from your PC.
thank you so much for your efforts
You are most welcome. ..
while create slot why its not shows midpoint?
Activate MID point in the OSNAP Menu (at the bottom)
WHILE Mirroring the slot & circle am unable to pick the midpoint as u did please help me on this how to pick the mid point of vertical line ??
Make sure that MID is on in the OSNAP. Otherwise right click on OSNAP , go to settings and activate MID.
Dear Sabeer thanks for the video its really a good start for me in particular. I have a question for you, i want to learn about how to draw elevated and underground water tanks of any capacity do you think you can be of help. I will appreciate if you can get back to. thanks once again n may God bless you
hi sir ... good videos for me
All the best..
Following your tutorial, I found a problem. After creating the box, and then the Fillets, I am stuck as no center point is available when I select Line . Your Autocad shows a triangle near the center of the top line. Also, when I try to put in the line position, it measures from the Arc, not the width of box. What am I doing wrong? Using Autocad 2015 Ver. Thanks Nice videos by the way, thanks for sharing
+Laurence Dodds Just activate MID at the osnap (at the status car , below) , you will get the exact MID point of the top line
sabeercad no sir its not working...
sry sir its working...thank u sir..
@@sabeercad Have same problem, thank you sir
dear, i cannot find floor plan tutorials.i need full.step by step.if you have can upload please.thanks
You can download it from tutorial file section in the web site www.sabeercad.com . Just load the site scroll down on the right side you can see the tutorial files section
nice video
Thanks
Heloo Mr sabeer.can u explain how to make the various drawing printout in one A3 size of paper.and show how to scale and prepair
You can get such a lesson from the Mechanical modeling section my channel ruclips.net/user/sabeercad
Can't find tutorial files on your web site. Thx for great tut.
Thank u sir i learned more to u,,, can i get continous lessons
I will try post such lessons...
sabeercad Thank u sir...
+sabeercad great video sabeer. Keep up the good work.
Thank you ... :)
thank you so much, sir
You are welcome
first i said to you thanks for your best teaching videos
Mr.Sabeercad I am requesting to help me autoCAD 2D videos which completely for building designed appliances
Thanks for your comment. wait for my future tutorials.....
excellent video sir please help me more to send video once again thank u sir
thank you sir.
You are most welcome
thank you, sir.
+madzlan muhammad You are welcome
thanks you sir
You are welcome :)
Hello,
Please correct the spelling of edting to editing
Thanks for the suggestion.
dear, can you upload 2D floor plan full tutorial
wimukthi srimal I have plans to upload such a tutorial ...
Great video yet has one mistake, arch in the center!
Just follow the tutorial closely, you will get it right
sir i need some 2d maps
Which one ?
and i need in 2D tutorials.
I will upload more in future.
Sir i want telugu autio card speak in telugu
+Gudi Surender Reddy Sorry .. I dont know Telugu ☺
Very basic
+CAD School You can get Advanced too ...
sabeercad do u hv any other drafting technique for making 2D drawing? I would like to see
Great video yet has one mistake, arch in the center!