I Installed foot straps on my DIY homemade electric Jet-Surfboard!
HTML-код
- Опубликовано: 11 сен 2024
- Throttle limit was set to 50%.
ESC temperature protection was set to 75°C, motor protection to 60°C.
During this test the motor was consuming about 10KW but it should be capeable of about 20KW continuous with impooved watercooling.
Weight of the board is 20kg and the battery 18kg + I weigh 75kg.
The board has zero flex wich is great and there was not getting any water inside wich i was originally afraid of.
Such an awesome build! Thanks for sharing! I really dig the board shape in particular. The handle position seems particularly thoughtful!
This is awesome! I want to build one now ! 🤯
Realy awesome 🤟 great build and test 🍀 ceya
Hello Alien Trip, your build is very nice. I would like to build one similar, what brand of parts are you using? I saw you mentioned 80mm jet and 10,000 watts. Thanks
Riding for us got so much easer when we added foot straps to our DIY board
Unfortunately its now getting to cold for more riding..
its like watching Tony Stark developing the Mark II
One day im gonna buy a DIY esurf and ride it down my cities rapids lol
100 % can you showing yours power system ( impeller) ...super job!!!
Nice work dude.... How big is your impeller?
Wow!!!!!!!!!!! What speed is that bad boy top out at?
Great project:) how do you deal with the danger of using higher than 50-60v on water? Will a short braker of 200-250amp will be enough to keep you safe from electrifying yourself
מה איתך חבר? הבאת את הקיימרה?
@@Eden_M Not yet decided to continue with the Philippines project.more potential to my opinion
@@Eden_M are you in Israel .i m lets talk over the phone
I like you DIY? geniously build papa-mama power plug.
which components did you use?
We’ll we need a tutorial to make this 😍
Can you build a new one a record it ?
What size battery are u rinning?
Really curious on the build
I can do everything but get totally lost on the electronics. Have not attempted due to safety concerns.
sick diy jetboard, what voltage are you using and what KV motor? thanks
The battery is 18S (75,6V fully charged) and the motor has 290kv.
@@alientrip6227 How long does the battery last?
Брат, ты живёшь в сказочно красивом месте. Очень похоже на рай ))).
What are your components ? Im very interested
How much did it cost to build this in total
Well done I like the board design! How many HP do you think it has? I’m building a gas powered board wondering how much power I need
Thanks!
10kw with the current limit wich should be around 13hp.
I think you would need at least 10hp.
The max rpm with the 80mm jet was 4500rpm during this test, hopefully this helps you choosing the right engine.
@@alientrip6227 yes! Thanks a lot my impeller is 100mm and the motor will do around 8000 to 10000 rpm I’m hoping for 10-12hp . The jet unit build is on my channel if you could tell me if it will work?
The 3d printed version looks great to me! I see no reason why this should not work, i'm just not sure how durable these 3d printed jet drives are.
@@alientrip6227 thanks nice to hear your input 👍
@@alientrip6227 Is that a MHZ jet drive?
How much RPM is needed to drive your 80mm jet drive? And how much RPM do you thing I would need to power a 100mm Jet drive?
would the tp 5870 290kv be enough by it self I weigh 135, the motor size is 58 by 122
Did you 3d print the jet drive
Est ce que vous vendez cse jetsurf
How to max speed?