Roborock LIDAR Laser Radar Repair
HTML-код
- Опубликовано: 8 июн 2021
- Roborock LIDAR Laser Radar Repair
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering! 
Наука
Colour me surprised. A modern device that is actually repairable. It can be done!
I'm going to show a much longer video servicing this, it will blow you away at how repairable it actually is
@@backofficeshow Excellent!
Thank you very much for this video. In my case the belt was dusty and slippery. I washed it with soap and water and now it works again.
That's fantastic, when they stop working it's painful 😂
These videos are still helping, thanks ❤
Thanks for the video. It helped me in fixing my robot.
Hi, great video! Where is the Amazon link for the motor?
Thank you so much for the video! I was able to fix my vacuum for about $11 instead of buying a new one.
Great video and much appreciated.
Thanks. My Roborock lidar stopped spinning again. I dropped a little oil last time, made it run 2 years more. I replaced it with a spare motor I ordered last time. In five minutes, it resume cleaning. you saved me figuring how to dissemble it. I think it had bad batch of motors. The replaced motor can still run, it may need another drop of oil.
That's great! I did wonder if there was the possibility of a higher quality motor replacement, but I guess it's cheap enough to replace every few years
Dropped a little oil where??
@@weetzybat motor axle.
@@vicever08 After how long did it stop working? Was it the only issue with your device?
Hi, do you know what voltage is applied to the replaced motor?
Thanks!
A fairly simple repair then! Good to see that this kind of "electronic home convenience device" is actually repairable, and not just a throw away item... Thanks for the video!
Absolutely, I wish everything was built this way, I'd happily pay the manufacturer for parts than a new machine every time something breaks
Is it the case for most robot vacuums or are some of them going the "Apple way" ?
@@goku445 most likely, the Apple way... unfortunately!
Great video ! Is this for the s7 ? Do you mind sharing the eBay link of wear you bought this ? Cheers
Excelent video. I live in Costa Rica, I must to buy in Amazon, do you have the URL or the part number. Thanks
Somebody help. I can find the laser Moter rather easily but can't find the belt. Haven't taken My S5 apart yet but I bet the belt has stretched. Thanks.
What size screwdriver are you using at 3:00?
Mine just needed a little tap on the motor and it was back in business
Thank you that wqs really hepfull
before taking it apart try manually spinning the sensor towards the right when starting a cycle. it fixed mine without having to change anything. think of it like jump starting a car
where do you buy spareparts? dont want cheap stuff
Thanks bro🇹🇷
here is a tip, instead of doing a cleaning run to test, turn off the robot, then hold the power button and press home button 5 times. now you are in the diagnostics menu.
I must try that, I have some later models, it might apply to those as well
Omfg this worked on my Q revo! Thank you brave internet stranger!
@toddkilgren5984 huzzah!
Muito obrigada pelo vídeo,achei que tivesse perdido meu robo,mas esse vídeo super explicativo me ajudou na troca da peça,está funcionando perfeitamente agora 🎉🇧🇷
Perfecto!
don't know if you missed that at 6:28 but i think i can see a tiny screw on the right hand side next to the barcode..
I'll double check that, thanks!
hi friend, great video! Have you any idea how to fix lidar on Midea m7 robot. i have error “clean lidar” and i don't know how to fix. I try to open the lids on the top to access the lidar but they don't go away, I'm afraid of breaking them. can you help me?
I'm not sure what a m7 is, but can you see the lidar spinning?
@@backofficeshow no
Mine needed a little WD40, thank you soooo much!
Thanks man!! First Chinese gadget I ever managed to fix lol
That's awesome to hear!
The rotatating turret is so sensitive that a single strand of my wife's hair stopped it. Very easy to fix though. Thank you!
hmm mine spins, so the motor works. took it apart any way to have a look..no dirt and the belt looks fine, but it still errors on the lidar. any thoughts?
Maybe the LIdar itself is shot. You can try to look at the unit while it's asking with you phone and seeing if the Infrared light is visible. You usually see it as a flickering straight line on the wall
Did you fix it?
I opened my 2010 Neato to repair the motor, it's the same except this Roomba is more simplified in the wiring than the old Neato technology
What is this lidar cover popping button purpose? I tried mine on S7maxV but it's does nothing..
I'm not really sure what button you are referring to, if you have a link to a picture I can take a look
@@backofficeshow cover of a LIDAR, 1:28 on yours video
@@playerone1431 that's so when it drives under something low, like a chair, it can detect if it's getting 'wedged in' by something pressing on the LIDAR
I have the Roborock 5S max
My lidar motor seems to work fine when I apply voltage to it. Also at start roborock seems to provide voltage. But when lidar module is in the vacuum it errors out. I think the edge connector is the fault. Any ideas how to improve the connection? I mean before I go and spend 100 bucks on new one with no guarantee it solves the problem.
I would attack it with contact cleaner and hope for the best
The black connector on my laser unit is at fault and I need to completely replace it. It behaves the same way as yours and I noticed that the "spring" connectors are too far way from the copper and don't make contact. I tried to bend them outwards, but it didn't work. The issue is that I can't find those connectors online to buy them. Can someone help me finding it? I don't even know how those connectors are called.
@@Pmiketube It's a type of edge connector. But I can't fine one with same pin count as this. If the bot was out of warranty I would just remove the connector form laser module and solder a cable to it directly all the way to the mobo.
@@MGL83I will probably end up doing that if I can't find a replacement. I'll keep looking for a few more days.. 😂
The smallest PCIe port in the world xD
This is, it looks like it's actually made to be repairable…
Can this be true in today's world?
Ingo, I am making a bigger video about this. Prepared to be very impressed
Knp error2