@@kieranhayesphotography a outlet near my everything must go so like return packages from Amazon still brand new only this was missing was remote thanks to the app working great
Thanks, glad it helped a bit. I have found it lasts about 45 to 50 mins at full power on a 99 watt V mount battery. I usually have it about 15 to 50% and it goes for ages then.
Great video, you’ve convinced me to want to get one of these but your link for the battery just brings me to all the battery selections for neewer. Which battery specifically do I need? Would a 14v work if the light says it’s for 16v? Is there one specific battery you recommend, or do I miss that in the video? Thanks so much!
Hi, great question and apologies if I didn't make that clear in the video, I usually miss something... So your traditional V Mount batteries are 14.4v traditionally and they measure up to about 15.6v to 15.8 volt with no load on them if they are fully charged. So any 14.4 volt v-mount battery with a D-tap connection will work on it then you just need the cable then too. That's why I didn't point at a specific Neewer battery as they will all work once they have a D-tap connection. There is a good price difference depending on the capacity of the battery also. I have the PS099E, there is 30% off that battery atm as there is a new model coming out soon. I hope that helps a bit.
Thanks for the reply. Figuring out batteries was driving me a bit batty so appreciate ya! I used ur Amazon affiliate links so here’s hoping they send some of that money your way cuz your video was pretty helpful for me trying to figure out a portable lighting rig. Cheers!
It works well with the NPF batteries and adaptor plate also. Just to be sure you know this... you need to use two NPF batteries at a time in the special adaptor plate.
@@MaxKreiss enjoy the light if you go for it, it's a great little unit. PS. My wife is German but my German is very bad so I won't try replying in German :-)
Thanks for the amazing review! What exactly do you mean : "135 Watts cause its powered via mains" ? It cant never go to 150 watts in any case scenario? Wich would be a real deal breaker. I mean....why advertise 150watts when you cant pass the 135watt mark, maybe im not understanding this correctly ... Thanks in advance.
Hi, it's a 150watt unit but some of that energy is not converted into light so it's really 135watts light output. It's one of the reasons I always look at the light output on lights especially RGB lights. A good few companies do this, it's one of the reasons I mentioned it in the review. I hope that helps clarify it a small bit. It's the LUX output is the real measure and in my mind there should be a standard measurement for that also. At least we can directly compare them then.
I am not sure about that. I was playing with that a while ago but I didn't have the MS150C at the time. Common sense would say they should be compatible but with patents now you never know. Sorry I can't answer your question.
You're very welcome and thanks for watching. It's always something I have looked for in a review when I was buying video lights before and strangely enough most people don't cover it.
Hi Mike, yes Dtap is necessary as the output voltage is higher. It's normally 14.4-14.8 volts so unless you have a DC socket with that voltage on your battery then you need to use Dtap. You can get cheap enough Dtap cables online. Or does your Vmount battery not have a Dtap connection?
Hi, you can use the Neewer V-mount batteries with the Neewer MS150 and MS60 video light via the Neewer NC010 D-Tap to DC connecting cable which connects to the D-tap connection. I hope that helps.
@kieranhayesphotography I had 2 of the battery powered fiveray 100c , they both had horrible UI, were way too green and died within a few months of purchase... my nanlite, ledgo lights have lasted me years and I really love using them. Let's hope this one is more like those than like the zyhune 🤞
@@jean-philippegrignom6479 That's crazy that they both died... and both of them had a green tint. That's really not good and sounds like there is a quality control issue there... Let me know how you like the MS150 when you get it.
You can get 21% off with my Neewer Discount code HAYES21 off all their products on the Neewer website.
I got it for 191 on Amazon prime, excited to use it!
Now that's a bargain, enjoy it and let me know how you get on 👍
Great video just went and picked it up for $50 that’s just a deal I couldn’t pass up
That's the deal of the century... How was it just $50?
@@kieranhayesphotography a outlet near my everything must go so like return packages from Amazon still brand new only this was missing was remote thanks to the app working great
ain’t no way it’s the SAME light for only $50 😂😂😂
Great video! Did you test how long can you run the light with the V-mount battery?
Thanks, glad it helped a bit. I have found it lasts about 45 to 50 mins at full power on a 99 watt V mount battery. I usually have it about 15 to 50% and it goes for ages then.
@@kieranhayesphotography Thank you, I ordered one, switching from flash strobes to led
Great video, you’ve convinced me to want to get one of these but your link for the battery just brings me to all the battery selections for neewer. Which battery specifically do I need? Would a 14v work if the light says it’s for 16v? Is there one specific battery you recommend, or do I miss that in the video? Thanks so much!
Hi, great question and apologies if I didn't make that clear in the video, I usually miss something... So your traditional V Mount batteries are 14.4v traditionally and they measure up to about 15.6v to 15.8 volt with no load on them if they are fully charged. So any 14.4 volt v-mount battery with a D-tap connection will work on it then you just need the cable then too. That's why I didn't point at a specific Neewer battery as they will all work once they have a D-tap connection. There is a good price difference depending on the capacity of the battery also. I have the PS099E, there is 30% off that battery atm as there is a new model coming out soon. I hope that helps a bit.
Thanks for the reply. Figuring out batteries was driving me a bit batty so appreciate ya! I used ur Amazon affiliate links so here’s hoping they send some of that money your way cuz your video was pretty helpful for me trying to figure out a portable lighting rig. Cheers!
@@Snowrite glad it helped and cheers for that. I appreciate it 👍
Can I also use it with npf batteries or is v Mount absolutely necessary?
It works well with the NPF batteries and adaptor plate also. Just to be sure you know this... you need to use two NPF batteries at a time in the special adaptor plate.
@@kieranhayesphotography thanks my friend. Greetings from Germany 😎🤝🏼🎥
@@MaxKreiss enjoy the light if you go for it, it's a great little unit.
PS. My wife is German but my German is very bad so I won't try replying in German :-)
Thanks for the amazing review! What exactly do you mean : "135 Watts cause its powered via mains" ?
It cant never go to 150 watts in any case scenario? Wich would be a real deal breaker. I mean....why
advertise 150watts when you cant pass the 135watt mark, maybe im not understanding this correctly ... Thanks in advance.
Hi, it's a 150watt unit but some of that energy is not converted into light so it's really 135watts light output. It's one of the reasons I always look at the light output on lights especially RGB lights.
A good few companies do this, it's one of the reasons I mentioned it in the review.
I hope that helps clarify it a small bit. It's the LUX output is the real measure and in my mind there should be a standard measurement for that also. At least we can directly compare them then.
@@kieranhayesphotography thank you for taking the time to answer, your informative videos are amazing quality by the way 🙏🏼🔥🔥
@@ViziaFilms thank you very much for the kind words, I really appreciate it.
Does the Nanlite FL-11 mini bowens mount Fresnel fit on this ?
I am not sure about that. I was playing with that a while ago but I didn't have the MS150C at the time.
Common sense would say they should be compatible but with patents now you never know. Sorry I can't answer your question.
Thanks for the detail on noise - so helpful to get a sense of noise levels.
You're very welcome and thanks for watching. It's always something I have looked for in a review when I was buying video lights before and strangely enough most people don't cover it.
Do you have to use dtap to use v mount?
Hi Mike, yes Dtap is necessary as the output voltage is higher. It's normally 14.4-14.8 volts so unless you have a DC socket with that voltage on your battery then you need to use Dtap. You can get cheap enough Dtap cables online. Or does your Vmount battery not have a Dtap connection?
Does anyone know the battery model?
Hi, you can use the Neewer V-mount batteries with the Neewer MS150 and MS60 video light via the Neewer NC010 D-Tap to DC connecting cable which connects to the D-tap connection.
I hope that helps.
Just bought this,I hope its better than zyhune, those lights suck.
I am very happy with the MS150C, it's a great little light.
I never tried any of the Zhiyun lights, what was the issue with the one you had?
@kieranhayesphotography I had 2 of the battery powered fiveray 100c , they both had horrible UI, were way too green and died within a few months of purchase...
my nanlite, ledgo lights have lasted me years and I really love using them. Let's hope this one is more like those than like the zyhune 🤞
@@jean-philippegrignom6479 That's crazy that they both died... and both of them had a green tint.
That's really not good and sounds like there is a quality control issue there...
Let me know how you like the MS150 when you get it.