Setup POE camera using ubiquiti wireless long range
HTML-код
- Опубликовано: 19 мар 2022
- How to setup POE camera over wireless long distance ?
So that you do not need to run a long network cable.
I'm setting up ubiquiti nanostation m5 for point to point Wifi or point to multi point Wifi.
This allows me to cover about 1 mile distance of sending the signal.
It's for outdoor and indoor use.
If you are using other nanostation model, the setup and process more or less the same.
Where can I buy the product ?
NSM2
- amzn.to/323eypZ
- amzn.to/3ikvNdx
locoM5
- amzn.to/3KV3uPa
NSM5
- amzn.to/3h3o80m
locoM2
- amzn.to/2GwzxsN
POE switch
- amzn.to/3tqa36D
- amzn.to/3ii0iB3
Reolink 4k camera + audio
- amzn.to/3ijvdwG
- amzn.to/3L4eH05
Mounting Kit
- amzn.to/3buYOPw
- amzn.to/3ijnhf5
- amzn.to/3i2DVhe
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely. 
Хобби
Very informative, you've just educated a old skool cctv engineer and I have a much greater understanding of wireless links now ,kind regards from the UK.
This was explained perfectly. This is the exact setup I need to do. Thank you for this video and for breaking it down.
You are welcome. Glad the video helped.
You did an excellent job explaining thumbs up. No music in the background.
I recommend these cameras I use them all the time. It works pretty good. No problem so far.
You did an excellent job very well explained. *****
i like you're cartoon drawings.
the Concern I had was the power going back from the NVR back through the same Poe injector.
Thank you for the fantastic guide. This really helped me.
Thanks for all this information.!
Thank you for the nice explanation.
I have the same in my work I use it to connected elevator camera it was work very well for 6 months after that something wrong happened cameras recording have a drop sometime for seconds sometime for minutes.
Perfect Explanation!
Great explanation, thank you sir
Great Explanation And Clear 👍
You are welcome. Glad the video helped.
The best video ever!
Thank for this clear step by step explanation. I already have the LocoM5 but would I would have not read the manual.
best video and best teacher
Thank you very much!
Does the NVR have to be connected to your network in order the beam the signal?
Really is amazing video and easy to understand thx
You are welcome. Glad the video helped.
This video was great but ome question the yellow cable coming from the ap which part on the nvr should it be connected to the original lan port or a regular port where the cameras plugged in
question: what's the minimum continuous bandwidth necessary for each 4K camera?
in other words: each wireless model/family (2.4GHz, 5Ghz as shown, AC, and 60Ghz stuff, etc.) has different throughput speeds... and if we want to run for instance 8, or 12, or 16 cameras on one POE switch... we'd want to make sure the wireless throughput could handle all that data flow over the wireless link. thanks for the great video!
Can we direct the camera to LAN port of enjector without POE switch? Thank you.
Great video. Just one question of you can help? Everything is set up as you explain in your video but when adding the camera on the NVR it asks for a ip address. Where can I find this? Thank you
Excellent video. Just did a test setup. Did not have to use a network switch as I had an external power 12volt supply for my camera. Just wanted to ask, can I connect my NVR directly to the ubiquiti and not use the injector?
best video ive seen
Nice careful explanation.
You are welcome. Glad the video helped.
Great explanation
Glad it was helpful!
Do the 2 black ubiquiti injectos are accessories come with default?
Excellent explaination
Glad it was helpful!
How do I get a laptop to get an IP on a different vlan than the mgmt vlan ? I have it on another bridge, and want to use the LAN port on the injector on the station side..My AP side is on a switch I'm unable to get an IP.
Well explained but you missed the router connection.. We put the access point cable into router and take a output from router to the NVR.. That only gives internet signal to the NVR and we can connect the remote cameras..
You the man
Wow thanks
Very good
Can you please do a video on installing hikvision over a point to point network.
Would really appreciate the help. good instruction video
I don't want to use a NVR. I just want to create a LAN without internet access share video on a computer connected to this LAN. Can I connect a nootebok directly to "Hello" wireless network? Or i'll need to create a new one using a standard wireless router? If yes, can i connect this router directly on AP LAN port?
If I use one of my dedicated laptops just for cameras, do I need to go in and change the IP address settings on the laptop? Can I leave it just set up for one thing only ubiquity and leave that first step alone I have half a dozen laptop so I can use just for ubiquity. Can I save those steps so I can just transfer them as a save file? for Station A & B. And just load them that way all the time a sec configuration.
MUY BUENO HERMANO
Gracias ! So tanks
If you attempt to run in the cables longer than 240 feet, you might have issues some cameras can go up to 350 feet depends on the manufacture.
Always use cat six do not use cat 5 e 150 feet. Do not mix pins. Make sure you have the blue and white and the brown and white in the correct spot. Otherwise you will destroy the camera.
White orange, orange, white green blue red blue green white brown brown Blue and white and brown and white or power.
The link to buy the ubiquiti wireless range pls
Hello
i connected ip cameras via litebeam m5 , my problem is they come on and off again , what could be the problem
Thank you
nice lecture
So, Gentleman, the NVR can be switched to another POE switch instead of NVR so at "A" can add more equipments in the network A+B?
kestion pam nan c kombyen kob pr peye demand lan ye
does the camera works
good job
You are welcome. Glad the video helped.
Good day sir, this set is dhcp ip address?
Thank you and please respect..
nice info
You are welcome. Glad the video helped.
tq admin
You are welcome. Glad the video helped.
HI, great video, a quick question, what is included in the box when you purchase the long range wireless kit ? thanks
ahhh.. ignore that 🙂
Question- I have mutiple buildings I will be mounting cameras on. Can you have more than 1 station transmitting to one access point?
if they are pointing the same direction, yes.
Hi, is there a way to have like 5 cameras in B building?
We need to put 5 pairs of ubiquity devices or we can do something like point to multipoint? Thanks
Yes you can. Direct from B Building ubiquiti
You did a great job explaining…. Can you have 2 stations with one AP?
You can, but you need to make you acquire units that are capable of point to multipoint, and then your only limitation is the 'beam width'. (Making sure the receiving units are in the path of the focused beam)
great explanation
You are welcome. Glad the video helped.
Hi, does the PoE unmanaged switch is necessary or does it still works without it? Thanks
Still work without it. But only for one camera.
At 13:39 mins when you changed the IP on your laptop to static. Is that step needed? And do I have to copy that exact IP address you entered. Will it be the same for everyone. Thanks
Yes, you PC needs static ip to configure. After configured, you can change back to automatic
Which point to point to use? 2.4GHz or 5GHz? Does it make a does it make a difference? My "B" building is 300 feet from the "A" building out in the country.
5ghz is more suitable for more bandwith due to channel amplitude 20/40/80mhz but less range compared to lower freq, like 2.4 ghz band but more interference.
Thanks very much, but what if there is no internet connection can the wireless cam in the b building still work?
Yes it will. If you do not have internet at all this will work locally. But building b will be connecting to building a via the antenna connection. Think of the antenna connection as an imaginary Ethernet cable. All you are doing is extending your internet from building a to building b. You could go as far as installing a PoE switch on building b and adding a wireless access point to give building b wifi internet access as well as hardwire devices.
Yes. The camera is running via LAN. It will still work to capture video recording into your DVR / NVR box. However, you are not able to live view from outside your LAN
Great explanation, would this work on a different NVR brand like Lorex? Thank you in advance
Yes it will
I added 2 camera through client mode access point but every time electricity cut off an ip conflict with nvr occur ,why?
Did you set it to dhcp? It should be static ip in the setting
How about sharing internet and cameras same anetnna use?
it will work
how manhy camera can I connect in the netgear switch?
as many as your nvr can take in
Will the B receiver be able to broadcast WiFi ?
B station does not broadcast wifi. You need a router, connect to B station for broadcast wifi
how many 2mp ip camera can handle of 1 ubiquiti m5?
I would think that does not matter. It can handle a lot of IP cameras
Hi..do I need to use the injector, when I can use the poe instead? Isn't it the same?
U still need to use the injector
Still need injector
So I will need just 1 pair of ubiquiti to connect A to B even if I have 3 cameras in Building B?????
You may con connect all the B camaras on the switch but all of them will be on the same channel on the camara device.
Do you able to connect this to your nvr?
yes, of course
How did you determine the Static IP address?
You can use router to identify the Ubiquiti Mac address and static ip it. Or Ubiquiti network tab to set a static ip if you know your router LAN IP range.
If you were sending out from the output of the back of the NVR Poe power and you're sending it back through the POE injector on the non-POE side you should probably most likely avoid the blue and white and brown and white pairs so it does not cause damage and power back through the POE injector . Need to make a custom cable what uses pins 123 & 6 / I'm not sure if the ubiquity power supply can handle the power from the NVR going into it. Because you have power going from the power over Ethernets switch to power the antenna but you're also sending power from the NVR back through the same Poe injector. I know it's more trouble that I would make up a special cable. ? Otherwise, you're doing a very good job explaining thumbs up. If you use the RJ-45 pass-through, it's very easy to make up your own connector. Pins 123 6 which would be in white orange, orange, white, green & 6 pin green that way you were avoiding the blue and white and white and brown which injector power.
why dont u put them on static instead of DHCP?
For the reason for all viewers. If I put static, viewers might put the same IP as mine which will then not working for them.
Hi, can I have wireless internet for phone and laptop in garage with this?
Yes. You need a router in Building B station
from building B poe you can connect a router to broadcast wifi in building B
7