It's super funny to see him throw the glues behind him, knowing that he will eventually pause the camera and bend over to pick up the mess he made...in silence 😂
It's weird that the first two glues he pulled out are exactly the two glues I bought a week ago. JB Marine, and Gorilla superglue gel. (The gel was garbage, btw, and i took it back today. There are many complaints about it; sometimes it's completely set hard in the bottle. Mine had gone so thick that it couldn't be expelled, even though I followed the directions (shake hard, invert, tap tip, etc.)
@@alfred1484 that's just the scientific name for super glue. Fun Fact: it was originally going to be a biological mending liquid (a kind of liquid stitches) for army and military use on minor wounds!
And it's the epoxy that is chunking up, it is designed to cure when it mixes rather than dry...so it sets quickly regardless of anything else....I'd say leave out the epoxys and the chunking up may not be as bad... Live for you to test this out when u have time! Thanks for the vids!!!
Yes, test without the two part epoxies. The catalyst will mess up the entire thing. Also, curing for 72 hours is normally enough to develop 95%+ of the bond strength. (I have an Instron)
A man I don't know glue his glue together and shove it on some wood and bricks? This is the quality content I needed in life, new subscriber right here.
Wood is more porous than bricks and a lot more than metal. The glue is able to seep in a significant amount more, plus its a more structurally useful surface, uniform, mostly flat, with a lot of uniform grooves to grab on to. Its a very good material for glue, and less useful than metal for use with nails, as it can splinter, metal can’t, but metal cannot be glued reliably being completely impervious to seepage, and a very slick surface. The more you know!
Sounds like you have a great and up to date teacher that uses every method to help you guys learn. I hope that is appreciated in some way at the end of the year.
I feel that. It’s 2:44 am on an in person school night for me. (If u are reading this comment far in the future, there were virtual days of school at the time of me commenting due to co-vid 19
Wood grain is actually quite absorbent meaning adhesives that do not have fast set time are able to bond litereally more deeply than metal or brick. Most likely reason the wood performed so mich better in both trials.
Not only is supporting and lifting difrent but based on some of them ie the compounds they can start to harden instantly leaving a few minuts to be applied befor they arnt as reliable. Wood would be better due to the fact that more than 1 was able to hold on better
If you cut water based non polymer wood glue with 90 rubbing alcohol just right. A few drop to let it flow and sink into the wood deeper. The wood will rip apart before the glue give up. Also if you do this to paper mache. It turn it into wood almost ..... made a 20 layer thick target for a petal gun. A shot the would tear high end tin roof . Can't put a hole in it
@@zachbartron2271 in many other countries like mine we use water to remained the sh** off and other stuff easily so we don’t need all that toilet paper
@@djbdyckfbsgsg9176 yeah 3M is usually the be all end all of adhesives. I saw a video where dude was talking about removing a keel from a rather large sailboat after unbolting it and having to use a forklift to break the bond.
Shaun Bryan I lifeguard over the summer, and last year I was helping prep the pool the month before opening and we used this on a new feature we got. I called in to talk to the place that sent us the feature as they didn’t include directions and the lady specifically said “make sure once you apply the adhesive you put it exactly where you want it because it’s never coming up”. She said they use that same adhesive for tanks at like zoo aquariums and shit.
Elmer's glue-all is actually one of the most effective glues for wood. Not even kidding. I wouldn't be surprised if you got the results you did because of the Elmer's alone.
@@benchabot6886 Wood glue and Elmer's glue are all PVA glues. Poly Vinyl Acetate is the glue type, and they differ usually with color additives and small amounts of other additives. That is why Elmer's is a good wood glue, regardless of which name it has as long as it is the white Elmer's it will be good for wood.
What if u mixed all the brands of glue and tested category’s of glue on there own like put all the wood glue together and try you test then put all the super glues together and do your test it super cool if you did 4or 5 of these categories
I was thinking something similar. Actual glue (hide, bone or horn glue made from animals and the word glue is derived from the word gelatin) is pretty rare these days. Categories of adhesives are PVA (Elmer's white and carpenters/wood glue), CA (cyanoacrylates, Super/Crazy Glue), solvent based (Liquid Nails, construction, E6000), epoxy (2 parts mixed together react with each other) and PU (polyurethane, original Gorilla Glue). There are also latex adhesives, acrylic resin (used for fiberglass and casting), mucilage and school/flour/starch paste (the other two water based school glues), spirit gum (similar to mucilage but alcohol based and used to attach theatrical appliances like hair, scars or horns to skin), silicones and of course hot melt, but I don't think any of those were represented here. Some categories are absolutely not compatible. e.g. CA with PVA adhesives which contain water, and will make the CA adhesives set immediately. Gorilla Glue is also water activated but would probably have some working time. I don't know whether epoxies are compatible with other types but the two parts should be mixed thoroughly before mixing with other types. They probably wouldn't work well with water based adhesives. Could also try mixing resin from one brand with hardener from other brand and vice versa but some brands only call them part A and part B so that could be tricky. I don't think water based adhesives (PVA and latex) would work well with solvent based adhesives, but some combinations might work OK. I could go on and on, but I'm afraid I'm getting close to chart territory...
I respect this guy, why? Well because he obviously puts a lot of work into his videos and doesn't just do something you can do in 2 seconds over exaggerated. This guy should be really respected in the RUclips community
Works better with wood because it has more grooves and texture for the glue to bind too, more surface area. Goddamn, I actually know what’s going on in a “science vid”
This isn't really a "Science vid" -He's just some cute goofy guy fucking around in his garage. He's just sharing the experience with us. He doesn't have a hypothesis or a control test, lol. Tyler is just goofing, and giving us some entertaining content with a dash of discovery.
New sub. I love how Tyler us natural and funny. Hes not tryna be over the top or extra hes just doing the experiments as if he was us. I love this channel already
this is really cool but, for the bricks, instead of scraping the glue off after the first test, creating a non-ideally clean surface for the new glue, why not just turn them around and use the virgin face for the second attempt ? 😛
That should be an interesting test to see if the bond between all will hold properly knowing that each glue has different strengths and weaknesses with each compound it’s made of I vote to have that done for a vid 💯
Tyler, this video is cool and great and you might not see my comment, but i think if you added like maybe 10 types of wood only glue and tried it on wood and metal, and then took 10 glues only for metal and tried them on wood too. too see if there is a good result or not. it would make for a pretty sick video
Elite Zararus it’s a lot more than “wood” glue or “metal” glue. It’s the base the glue is made of, for example flex glue and e6000 are silicone based glued while epoxy is not. Elmer’s glue, gorilla glue white are water based adhesives. Straight gorilla wood glue is a foaming urethane base. A lot of interfering chemistry as water and petroleum based products will inhibit the curing of silicone RTV (any one or 2 part room temp curing silicone product) water based glues are inhibited by water(in too large of a quantity)and petroleum based products.
@@SeptrothFFXI I just saw a lot of fancy words and not one of them made sense to me. This coming from someone who had been nicknamed walking dictionary and Wikipedia
I've been here since around 2k subs and it's been so fun watching you learn and grow as a content creator. Your editing skills and charisma in front of the camera have grown immensely. My girlfriend and I watch all of your videos you release as you seem like a kind guy just trying to have fun, and your artistic growth is visible with every new video. I look forward to all the videos you make in the future, Tyler.
When you find out you can't stand because the sheer weight of gravity on your puny self and it causes the the glue bottle to not only be immovable, but would even be able to crush you.
The reason why a lot of different glues don't work well is because they get in each other's way. Adhesives work by creating a uniform binding force. The use of epoxies with liquid glues will also explain the chunkiness of it after its mixed. The bricks and the metal work less effectively because the have less surface area than the wood. Different chemicals reacting with a lot of chemicals it wasn't designed for. The pull apart test shows how the wood supports more, if you look as he put it together, a lot of the glue was forced out, only leaving the majority of the thinner and runnier glues that could get into the small pockets in the wood's surface, like interlocking fingers.
I remember when you only got a few thousand views per video. I've been subscribed since around 2000 subs and I'm so happy for you and I can't wait to get the t-shirt!
He forgot the most important glue: those weird purple glue sticks you had in elementary school that somehow dried clear.
One of my buddies dared a dude in my class to lick one of those
Ian Topczewski non toxic basically means “eat in in front of your friends for respect”
@@jasonmurawski5877 facts. We would dare each other to lick it cause it always smelled good
A kid In my class dried glue in his desk and sold the glue as food I got some for free
Tala B everybody had some crappy one while mine was clean
It's super funny to see him throw the glues behind him, knowing that he will eventually pause the camera and bend over to pick up the mess he made...in silence 😂
1st
Haha
It's weird that the first two glues he pulled out are exactly the two glues I bought a week ago. JB Marine, and Gorilla superglue gel.
(The gel was garbage, btw, and i took it back today. There are many complaints about it; sometimes it's completely set hard in the bottle. Mine had gone so thick that it couldn't be expelled, even though I followed the directions (shake hard, invert, tap tip, etc.)
Just mix the Elmer’s glue with Elmer’s glitter glue it’ll be the strongest
Andre Photo the glitter will make it stronger then any star
nick long Than*
Andre Photo but remember if he does that it will be so strong it will crack the universe
I love that this comment has the most thumbs up so he is gonna go it next vid
Can I glue a house to another house
I had to much beauty community drama and it's led me to this bearded man mixing weird shit in his garage. Thumbs up, great content.
Vancity FitGirl literally same
Vancity FitGirl．NO SWORE
One time I was with a girl and air came out
@@kokichistoe3854 get off of kingdom hearts
1800s bro... you’re fucking epic
Wha... where is the glitter glue?!?!
Mike Pierce idk
yea!
And china rip offs?
GLITTER GLUES! HE MISSED THE GLITTER GLUES!!
@@alfred1484 that's just the scientific name for super glue. Fun Fact: it was originally going to be a biological mending liquid (a kind of liquid stitches) for army and military use on minor wounds!
Did he just glue his glues
Yup
I laughed so hard at this
Ooohh😜👉
I did not expect this to get this much likes in that much time XD
*I'll put glue in your glue so you can glue more with glue!*
Why am I watching a guy mix glue when i should be sleeping?
Same
I dunno it's 5am here
TheRedStormer for me it is 3 am
Same
We will never know the answer
Nobody:
Tyler *every video.* : so. I said I’d be back in 30 minutes... it’s been 6 months
😂 it's funny cause it's true
Just like my father
Tuğba wait
So I bought a couple 9v batteries... I bought 300
Looking really really tired too.
I like to imagine he went through a huge adventure during those 6 days😂
Those tiny wood blocks be yelling "LIGHT WEIGHT!!" 😂😂
+Alfred Everything thats 3 times my weight
😂😂😂
Wait your 60pounds
@@JustAnEgg im 144 pounds 👌
Alfred Everything me too!!
Admitting you were wrong for the sake of content quality? Subscribed.
*Quality content**
Same
This dude legit added a new element to the Periodic table
Glueranium
or gluetonium
GlueTastrophium
SulveiDoesAnimation glueium
ELUG
Edit lol spelled it wrong backwards eulg
Imagine the fumes coming of all that glue, he must have passed out and didn't wake up for six days
I was thinkin he musta been high as shit makin this video
Right😭
@@joeystza9972 he was, you aint notice his voice slow down?
@@Kanoshe bruh as soon as he said he was usin e6000 i knew😂
Legalize glue man !
I like how you just chucked the glues behind you
I love every part when it happened
I’m cracking up at that rn 😂
He should make it a trademark of his channel
You look little bit like hornswoggle but bigger
Ik so funny
I never knew adding that music could make mixing glue so emotional for me
Lol
Lol
I got you to 200 likes
@@ivantamayo6602 hows that lmao
@@ivantamayo6602 would rather have 200 more followers on twitch LMAO
And it's the epoxy that is chunking up, it is designed to cure when it mixes rather than dry...so it sets quickly regardless of anything else....I'd say leave out the epoxys and the chunking up may not be as bad... Live for you to test this out when u have time! Thanks for the vids!!!
Bump
Hope he redo
Why is this not every comment? It seems obvious?
Was thinkin this too my man, damn.
Yes, test without the two part epoxies. The catalyst will mess up the entire thing. Also, curing for 72 hours is normally enough to develop 95%+ of the bond strength. (I have an Instron)
Does he have a whole damn zoo???? Hes got like 15 different species of gorillas.
Tyler exotic gorilla glue king
It’s not a zoo. And it’s glue, not an actual gorilla
@@MinePlush you’re a fucking dumbass
@@MinePlush omg smh 🤦♂️
Maybe he knows an entire football team
Yes I made an "athletes dumb" joke sue me
Where's the god of glues, the glue stick?
I eat them.
NoctusOverdroid so true
Or most importantly glitter glue
that would make it harden much faster
it's litterally at 420 likes.
It looks like cookies and cream icecream
It does
HOW TO MAKE YOUR OWN COOKIES AND CREAM FROM GLUE (GONE SEXUAL)
Go ahead... EAT IT
r/forbiddensnacks
Bobby Reeves your right
A man I don't know glue his glue together and shove it on some wood and bricks? This is the quality content I needed in life, new subscriber right here.
Me too
I agree.
Liquid nail been holding up a cabinet in my house for 40 something years.
my roommate has a shotgun held together with JB Weld lol
pfft.. noobs
my life is held together with Elmer's glue
Maybe it solidified.
Maybe it solidified.
Maybe it solidified
Make a brick out of flex glue, let it harden then shoot it with stuff
sam eddins or take flex seal and let it harden into a brick
Hell Yeah cast a brick with flex glue
I think we’re on to something
sam eddins yes
sam eddins "Simpsons did it". And by Simpsons I mean demo ranch
Walmart Guy: Which glue do you want?
Tylertube: Yes.
Lmfao
wait people work at walmart 🤔
Tomás Alejandro Araya Olmedo funny and original
@@trevornabors4880 thanks
Hahaha 😂
Wood is more porous than bricks and a lot more than metal. The glue is able to seep in a significant amount more, plus its a more structurally useful surface, uniform, mostly flat, with a lot of uniform grooves to grab on to. Its a very good material for glue, and less useful than metal for use with nails, as it can splinter, metal can’t, but metal cannot be glued reliably being completely impervious to seepage, and a very slick surface. The more you know!
Seepage 😁
Thanks bro lmao I thought i was literally the only one to think that like I was surprised Tyler didn't know
I know the wood wolud be the strongest out of all of them
My exact thought... Too precise...
also he used several wood glues
Imagine if all the glue bottles and containers broke open when he was throwing them behind him and his whole floor was a mouse trap
poor mice
Or a Laggy Duck trap! 😳
Would be a crappy trap after a few hours
Human trap
This is one of those videos that solves my bucket list questions
NO ONE MAN SHOULD HAVE THIS MUCH POWER
Anay Patel *no one man should have all that power
Stop trippin I'm trippin off the power!
Hey but pull not like push
Anay Patel no one man should have this little power
The clocks tickin I just count the hours
we tried this for science in class and it preformed the same. we even got to watch this video
Where?
@@TylerTube tricounty schools
Thats really cool, science was my favorite subject in school!
@@TylerTube its my favorite too
Sounds like you have a great and up to date teacher that uses every method to help you guys learn. I hope that is appreciated in some way at the end of the year.
Him chucking the glue behind him as he names them is honestly such a mood
Cassie B he still had to pick them up
Everything is a "mood" anymore.
You have a really beautiful throat
Jakob Christensen creep
@@jakobchristensen7860 what a nice compliment!
*Hardvard wants to know your location*
*HARD* vard
@@evangellic_ you fail to understand the joke lol
Hardware*
What house do you live in blue or red
@@evangellic_ no u
Anybody else think that it looks more like artichoke dip then it does glue
omg i was thinking the same thing through the whole video. :o
Plot twist...?
I wonder if it taste good or not
TBH I probably would've eaten it if I couldn't smell it
Whatever that is, sounds disgusting if it looks like THAT.
glues: *minding their own business*
Random guy: picks them up and yeets them into a garage door
Knightxx2069 the glues be vibing
*Me: Tries to get my sleep schedule back on track b4 I go back to school*
*Also me: Watches some guy mix glue at 2 in the morning*
It is literally 2:15AM on a school night, I have never felt a comment more 😅
More like 4am😂
Lol
I feel that. It’s 2:44 am on an in person school night for me. (If u are reading this comment far in the future, there were virtual days of school at the time of me commenting due to co-vid 19
Wood grain is actually quite absorbent meaning adhesives that do not have fast set time are able to bond litereally more deeply than metal or brick. Most likely reason the wood performed so mich better in both trials.
Strain of the grain an all
Much*
That is what i thougth
"DUMBASS!" 😂
@@slugtoast4400 lol missed that, typed this on my phone at like 2am....just gonna leave it though since you decided to correct it for me.
Lifts 180 pounds on one test, and fails at 20 on another....
Just like me... all extremes! No in between :D
Lifting and supporting are really different. You get really impressive results
Not only is supporting and lifting difrent but based on some of them ie the compounds they can start to harden instantly leaving a few minuts to be applied befor they arnt as reliable. Wood would be better due to the fact that more than 1 was able to hold on better
Chef Seblefr hmmmm
I have a feeling that there’s a sub-reddit that this could go on!
I subscribed when he started throwing all the glue with a straight face
The people that disliked are triggered the little blocks of wood can lift more then they can.
e6000 is really strong I use it all the time and the epoxy jbweld
??????
I hate e6000, waited 2 days for it to dry and it never did
@@firstnamelastname8865 you probably didn't use it right. E6000 is so underrated, it's an amazing product.
probably just my fat ass, but it looks more like cookies and cream ice cream
It does look like cookies and cream
It does hmmmm maybe it is
What do you have to be thinking about to conclude it looks like cookies and cream ice cream lmao
😂😂 my fat ass 😂
It looks like that ice cream that they roll up right before they spread it out 😂
Gorilla glue mixed with wood glue would be the ULTIMATE wood glue.
ive done that with RC planes, mixing wood glue and gorilla glue. gotta be careful cause it will expand real quick
wood be the ultimate glue*
If you cut water based non polymer wood glue with 90 rubbing alcohol just right.
A few drop to let it flow and sink into the wood deeper. The wood will rip apart before the glue give up. Also if you do this to paper mache. It turn it into wood almost ..... made a 20 layer thick target for a petal gun. A shot the would tear high end tin roof . Can't put a hole in it
But if there's a lot of damage, FLEX GLUE
Plot twist: it's just Elmer's Glue with some chunky toilet paper in it.
He knows to much
No! Don't waste the toilet paper! -Quarantine future
You mean Lou roll
Yes we must save the toilet paper. Our lives depend on it. XD
@@zachbartron2271 in many other countries like mine we use water to remained the sh** off and other stuff easily so we don’t need all that toilet paper
I'd like to see a 3M marine adhesive sealant 5200 test. This stuff is supposed to be some serious sh!+.
Never heard of it, sounds good tho
@@djbdyckfbsgsg9176 yeah 3M is usually the be all end all of adhesives. I saw a video where dude was talking about removing a keel from a rather large sailboat after unbolting it and having to use a forklift to break the bond.
Shaun Bryan I lifeguard over the summer, and last year I was helping prep the pool the month before opening and we used this on a new feature we got. I called in to talk to the place that sent us the feature as they didn’t include directions and the lady specifically said “make sure once you apply the adhesive you put it exactly where you want it because it’s never coming up”. She said they use that same adhesive for tanks at like zoo aquariums and shit.
I was kinda expecting a portal to open and Chuck Norris to step out and hold everything together.
thats blasphemy! the true glue god is that flex tape guy >:(
"That's a lotta damage"
I was expecting him to step out and be the one to actually break the bond
Elmer's glue-all is actually one of the most effective glues for wood. Not even kidding. I wouldn't be surprised if you got the results you did because of the Elmer's alone.
It was school glue, not glue all I think
@@benchabot6886 Wood glue and Elmer's glue are all PVA glues. Poly Vinyl Acetate is the glue type, and they differ usually with color additives and small amounts of other additives. That is why Elmer's is a good wood glue, regardless of which name it has as long as it is the white Elmer's it will be good for wood.
I know this has nothing to do with your comment, but I love your profile picture!
Flex seal glue 2.0 white. For sure.
all gloos work the same. 'wood glue' and other gloos have same results on anytihng
What if u mixed all the brands of glue and tested category’s of glue on there own like put all the wood glue together and try you test then put all the super glues together and do your test it super cool if you did 4or 5 of these categories
That sounds like several different videos
I was thinking something similar.
Actual glue (hide, bone or horn glue made from animals and the word glue is derived from the word gelatin) is pretty rare these days. Categories of adhesives are PVA (Elmer's white and carpenters/wood glue), CA (cyanoacrylates, Super/Crazy Glue), solvent based (Liquid Nails, construction, E6000), epoxy (2 parts mixed together react with each other) and PU (polyurethane, original Gorilla Glue).
There are also latex adhesives, acrylic resin (used for fiberglass and casting), mucilage and school/flour/starch paste (the other two water based school glues), spirit gum (similar to mucilage but alcohol based and used to attach theatrical appliances like hair, scars or horns to skin), silicones and of course hot melt, but I don't think any of those were represented here.
Some categories are absolutely not compatible. e.g. CA with PVA adhesives which contain water, and will make the CA adhesives set immediately. Gorilla Glue is also water activated but would probably have some working time.
I don't know whether epoxies are compatible with other types but the two parts should be mixed thoroughly before mixing with other types. They probably wouldn't work well with water based adhesives. Could also try mixing resin from one brand with hardener from other brand and vice versa but some brands only call them part A and part B so that could be tricky.
I don't think water based adhesives (PVA and latex) would work well with solvent based adhesives, but some combinations might work OK.
I could go on and on, but I'm afraid I'm getting close to chart territory...
That would have been the smart thing to do. But apparently he just wanted to flex that he had money to waste on glues. 🤷
Glue doesn't sound like a word anymore
Oliver Kirkland glue is now a natural element
Oliver Kirkland I see you everywhere, I’m gonna just go ahead and subscribe to you
You from Cape town
semantic satiation
Poo
I respect this guy, why? Well because he obviously puts a lot of work into his videos and doesn't just do something you can do in 2 seconds over exaggerated. This guy should be really respected in the RUclips community
DragonFireDrawings ARGEE!!!!
I love how he just causally chucks 100 tubes of glues onto the floor behind him 😂
question: what happens when you mix every glue together
answer:the fumes make you see jesus and die
So awesome to see how fast you’re growing!
I know
dont we stop growing at age 18?
Random Chanel No
That's... Not right.
Yes Elmer's glue (STRONGEST GLUE OF ALL!)
And most rare, especially in the craft section
INDEED
Elmer's glue is focusing on making slime now
@@jacenbush7185 really?
You created the strongest glue yet. Now you should make it a product.
He'd have to sell this stuff for $100 a bottle to make a profit lol
TylerGlue ( ͡° ͜ʖ ͡°)
The Elmer's Glue was already the strongest glue yet.
@@yeetthymeat5405 Elmer's glue was the best glue but, not anymore.
Good suggestion
Works better with wood because it has more grooves and texture for the glue to bind too, more surface area. Goddamn, I actually know what’s going on in a “science vid”
Bryony bb lol. The term you’re reaching for is “ substrate porosity. Excellent work.
nah he just added wood glue
this is such basic thinking but okie
peepee yeah but he glued on the end of the wood grain. Looks like pine but glued with the grain could yield better results
This isn't really a "Science vid" -He's just some cute goofy guy fucking around in his garage. He's just sharing the experience with us. He doesn't have a hypothesis or a control test, lol. Tyler is just goofing, and giving us some entertaining content with a dash of discovery.
New sub.
I love how Tyler us natural and funny. Hes not tryna be over the top or extra hes just doing the experiments as if he was us. I love this channel already
Make a super GLUE STICK
Yeah I really need that. Everytime I have to stick a picture on my book it always falls off and gets loss
@@sorasarielcl ikr!
Z Bricks than you need a super glue gun
Great idea
Still wouldn’t be that good, it would fall off of the paper :(
10 things scientists don't want you to see
“And probably the strongest one of them all”
Phil Swift: nervous sweating
you get *SUPER* super glue
YOUR FAMOUS
You have 73k subs
You need to make a video
No, he must never make a video, continue his legend! Also I subbed and hit that bell for God knows what reason
Le gasp I saw you on the pewdiepie videos
“And probably the strongest one of them all..Elmer’s glue😂😂”
Breanna Smith it is tho we can’t lie
FBI right 😂
Breanna Smith i was About To comment That until i saw u allready did😂
6969 Subs With No Video Challenge dang😂😂😂
Elmer’s glue was easily the weakest. Don’t even pretend
Concrete is glue if u think about it
not concrete cement
Its Life perhaps mortar also?..
Justin Williams yes that
Its Life what if I don’t think about it, is it still concrete?
AdeleyDunda nope it’s just a noodle
this is really cool but, for the bricks, instead of scraping the glue off after the first test, creating a non-ideally clean surface for the new glue, why not just turn them around and use the virgin face for the second attempt ? 😛
I know right!? 🤨
Loving the format, glorious beard. Nine tokes out of ten. Would toke again.
Strongest of them all (elmers glue) lol 😂
right lol. looking for this comment.
Can I ask you something?
Tastiest of them all as well. Those who miss licking stamps know what I'm talking about. 😊
At first I was watching you for the flex glue memes, but now I'm just fascinated.
I’m tryna have a relationship as strong as the small boxes of wood🥴
180 pound relationship
Get some glue and mix it all together.
A relationship where one of the two has lots of deadweight attached to it?
Jakob van Klinken damn you put it into that perspective it sounds so much more depressing
THE SECRET TO COOKIES AND CREAM ICECREAM HAS BEEN REVEALED
That would be amazing to eat lol
Lmao let's go make some now
I believe the actual secret to cookies and cream would be man's homemade special cream.
@@zragevii4705 Actually, an Oreo cookie milkshake
Gorilla wood glue and Elmer’s wood glue try that on the wood
outlaw ramrod SCIGRIP MMA
They are both just PVA glue but Elmer's more watered down. Basically it would be exactly the same as wood glue but slightly weaker
What kind of antigravitygarage do you have
Lol 🔥
@@jaytheredpanda183 lol
keep replying lol so it gets a ton of replys
lol
@@redpug5042 lol
tyler is such a happy wholesome dude and it makes me feel like a happy wholesome dude myself
Why did youtube recommend this to me....
It was interesting though
Same
same?!?
Same
I loved it
CreatorMystic cause youtube likes the video
I wonder if instead of mixing them you put strips each glue straight on the brick without letting them mix if it would be stronger
You on to something here bro
That should be an interesting test to see if the bond between all will hold properly knowing that each glue has different strengths and weaknesses with each compound it’s made of I vote to have that done for a vid 💯
@JScope yeah but not as much
The real stress will only be on each of the glues on both brick sides then
As cool as that'd be, it wouldn't work. It's one of those situations where you're only as strong as your weakest link.
I donno why youtube recommended me this
*but i liked it*
Did you google "how to fix my broken heart" recently ?
@@Jay1830 no, what makes it even more weird is that all my searches are made in brazilliam portuguese
You read my dam mind
Ralsei On drugs same my dude
Because you obviously wanted to watch it
“I’ll be back in 12 hours..”
*6 days later
Hahaha he’s so funny
All I gotta say is, that's a lot of damage.
I was going to comment that too oml
Omega lol
But "No long term damage" (only beasts are gonna get this)
Luke Weatherly its "No long term damage"
Alex, play Chime & Lost Vegas - Damage.
Tyler, this video is cool and great and you might not see my comment, but i think if you added like maybe 10 types of wood only glue and tried it on wood and metal, and then took 10 glues only for metal and tried them on wood too. too see if there is a good result or not. it would make for a pretty sick video
Elite Zararus it’s a lot more than “wood” glue or “metal” glue. It’s the base the glue is made of, for example flex glue and e6000 are silicone based glued while epoxy is not. Elmer’s glue, gorilla glue white are water based adhesives. Straight gorilla wood glue is a foaming urethane base. A lot of interfering chemistry as water and petroleum based products will inhibit the curing of silicone RTV (any one or 2 part room temp curing silicone product) water based glues are inhibited by water(in too large of a quantity)and petroleum based products.
@@SeptrothFFXI I just saw a lot of fancy words and not one of them made sense to me. This coming from someone who had been nicknamed walking dictionary and Wikipedia
when 2 blocks of wood and some glue has more gains than you....
Joe B when my wood is bigger than yours
Joe B You can’t lift 45 pounds?
@@jon.... no I mean the small wood blocks 😂
Joe B only liked because of ferrari
13:54 "140 pounds now we're getting into people weight"
Me: *is 110 pounds on a good day* what am I not a people
Same here lol Squid
It sez here ura grot.
lol I thought 140 was light
No you are not. You are a dwarf. Get back in the forges you tiny bastard.
Luisa Enns I was making a joke. Honestly thats not really healthy though.
I wonder if it can hold my parents relationship together
Oof
That hit really close to home. Good luck man.
No it won't... You'll be fine, people lose interest in each other the sooner you accept that the sooner you'll be better off
Maybe the fumes from all those chemicals will make them forget their problems for a while.
That’s the tea sis
I've been here since around 2k subs and it's been so fun watching you learn and grow as a content creator. Your editing skills and charisma in front of the camera have grown immensely.
My girlfriend and I watch all of your videos you release as you seem like a kind guy just trying to have fun, and your artistic growth is visible with every new video.
I look forward to all the videos you make in the future, Tyler.
thats awesome, thank you!
How do you get a lot of subs
Charisma 100
Do u know nuclear ice cream
Never thought I'd see a professional gluer, but here we are
Edit: 500 likes OMG THX SOOO MUCH AND A PIN
You can actually get a job as a folder gluer operator, good money
OMG so many likes
It got unpinned lol
@@bremensims6086 Because they edited it
@@nexusxe you have ruined my dreams
This man is basically making those “potions” we made as kids, but as an adult and getting paid for it.
Bravo my dude.
when you find out elmers glue can lift more than you.
when you find out glue can pick you up
Ha good one man
When you find out you can't stand because the sheer weight of gravity on your puny self and it causes the the glue bottle to not only be immovable, but would even be able to crush you.
Doesn't feel surprising to me lol, I can't lift much unlike many others my age.
@@Isaac-ho8gh As someone 60 pounds underweight, I understand.
*Be back in 12 hours*
" i lied, its been like 6 days "
Me talking about homework
Just because this has flex glue i am subscribeing
The smell that comes out he opens this garage must be able to make you see through time and teleport.
180 pounds!?!?, I thought that it would break at 40!
I NOW PRESENT TO TO YOU
TYLER WOOD GLUE
NuclearDoomKhajiit g
The reason why a lot of different glues don't work well is because they get in each other's way. Adhesives work by creating a uniform binding force. The use of epoxies with liquid glues will also explain the chunkiness of it after its mixed. The bricks and the metal work less effectively because the have less surface area than the wood. Different chemicals reacting with a lot of chemicals it wasn't designed for. The pull apart test shows how the wood supports more, if you look as he put it together, a lot of the glue was forced out, only leaving the majority of the thinner and runnier glues that could get into the small pockets in the wood's surface, like interlocking fingers.
Tyler: this is gonna make it 30lbs....
Glued bricks: "NOPE"
He's getting too smart we must stop him
Jesus Christ...
It's Jason Bourne!
When I read that the video was paused on a goofy smile into the camera
I was worried for a bit that you might not have had elmers glue
We were worried if elmers glue was stronger than you
Same
Elmers is the strongest glie ever cant change my mind
Paper Mario same
I feel like that glue dried WAY faster than the other glues. That was probably the biggest problem.
I remember when you only got a few thousand views per video. I've been subscribed since around 2000 subs and I'm so happy for you and I can't wait to get the t-shirt!
Newty Boy dude fuck off
@@bufferr_ No u
I just appreciate that Tyler looks like the type of guy who would put loud country music over the quiet clips, but actually puts decent music. 🙌🏻
Now this is *EPIC,* smash like for *EPICNESS*
Edit: The videos like button
I already did
Okay RUclips recommendations, you can stop.
Hi
Yet you watched it 😂
Ikr
I don’t even know if I’m 2nd. As I’m typing this, I could be 368th
Your 79th
I say youre first... You Did IT!
21st
The Emerald finally some who understands!
Braamenwurst K8
Are you talking about your father?
things Tyler hates: PICKLES
It's 3 am and I have a test tomorrow, why do I do this to myself
Justin Durr Did you do well?
@@badbichtella got an 86
Wow
Fuckin idiot
ѕаме
5000 likes for him to cut his beard off and to glue it back on
@Phantom Play for real... What happened to the good ole days when people did thing for thrill...and for laughs
Fuck yeah 😎
Everyone like this
Jr jr good god
Hell no. You want him to suffer pain you idiot?
I absolutely love how you’re throwing every glue behind your back 😂 you’re the best for that
# Swedish chef in the house
@@wigglyfruit4708 yess 😂😂
He’s doing the works of higher beings with better imagination that are in sync with my childhood ideas and beliefs. Thank you 😊