So I have looked at both your videos/ disassembly and Assembly, in your Disassembly video the purple buffer is on the end of the spring guide, 5:24 then when you assembled it (9:23)you put the Purple buffer on to the spring guide followed by spring. So which is the correct way to assemble? Please
Still waiting for the ssp18 carbine kit to be launched, its becoming a joke every month we visit the web and find the "In Production" logo as always, 3 ssp18 users in my team, waiting for the kit, im pretty sure we are going to sell the gun before you launch the kit XD....
whoever assembles these pistols at the factory will burn in hell. It is not possible to unscrew the outer barrel without damaging it. I left it in WD40 for a day - it didn’t help. I strongly heated the part to which the outer barrel is screwed, then quickly poured cold water over the outer barrel. I clamped it all in a vice, wrapped it in a thick rag (so as not to scratch it) and unscrewed it with pliers. Still scratched everything. But I unscrewed it... It looks like the parts were painted and screwed together and left to dry. All the threads were clogged with some kind of shit. And it's not loctite. This is not a moving joint, there are no vibrations. NO LOCTITE NEEDED HERE. If you are still worried that the barrel will unscrew... just install a rubber washer (o-ring), etc., and there will never be any problems. To unscrew the screw securing the inner barrel, heat it first... otherwise you will strip the thread instantly. And lo and behold...there is NO need for loctite here either. If you are still worried, use the weakest, small drop of green loctite. And I don’t know why the part shown at 5:05 is needed... it doesn’t hold anything... thank God there is not a single situation in the world where you need to unscrew it. and If you really want to... you won’t be able to. it was fucking glued or welded by some asshole during assembly. but despite all this... the gun is just awesome)
Guy: removes outer barrel of ssp super easy
Me: "should be easy!"
Ssp5: "YOU NEED THE STRENGTH OF A GOD TO TAKE THIS OFF*
so true help
@@1123Barny1same here… thinking about buying a new chamber… easier
Bro unmöglich den außenlauf einfach abzuschrauben… habs mit Rohrzange etc versucht, da bricht eher was…. Wie soll ich jetzt das bucking wechseln?
Did u guys make a video on the 4.3plus and how it works to change barrel
The outta barrel is so tide... I can't unscrew it... What can I do?
i have the same problem, i even used pliers, scratched the outer barrel, did not moved at all...
same issue. even bought a colored barrel to replace it
that's what they want，buy another barrel that you need
why does no one explain how they easily push the slide catch out. i cant get it out at all
what outerbarrel thread does the ssp5 with orange tip come with and if i do order a new outer barrle what thread will that one have?
Does the gun need the safety to function or can it be removed
One screw holding the blowback housing?😮
Yea unfortunately mine came loose while a buddy was running mine and the housing basically blew up
So I have looked at both your videos/ disassembly and Assembly, in your Disassembly video the purple buffer is on the end of the spring guide, 5:24 then when you assembled it (9:23)you put the Purple buffer on to the spring guide followed by spring. So which is the correct way to assemble? Please
why is the translation option not included on the comments in your reviews because not all people know the English language
Now that i saw it. Is the SSP5 Lower comatible with the SSP1 ?
I peeled the skin off my palms and that barrel did not move… that is humanly impossible to replace… apply a bit a heat they say: useless…
Please say wrench size and type during disassembly
Still waiting for the ssp18 carbine kit to be launched, its becoming a joke every month we visit the web and find the "In Production" logo as always, 3 ssp18 users in my team, waiting for the kit, im pretty sure we are going to sell the gun before you launch the kit XD....
the inner barrel is made of steel?
Hop up chamber is metal or from plastic?
Can you put short stroke on this pistol?
whoever assembles these pistols at the factory will burn in hell. It is not possible to unscrew the outer barrel without damaging it. I left it in WD40 for a day - it didn’t help. I strongly heated the part to which the outer barrel is screwed, then quickly poured cold water over the outer barrel. I clamped it all in a vice, wrapped it in a thick rag (so as not to scratch it) and unscrewed it with pliers. Still scratched everything. But I unscrewed it... It looks like the parts were painted and screwed together and left to dry. All the threads were clogged with some kind of shit. And it's not loctite. This is not a moving joint, there are no vibrations. NO LOCTITE NEEDED HERE. If you are still worried that the barrel will unscrew... just install a rubber washer (o-ring), etc., and there will never be any problems.
To unscrew the screw securing the inner barrel, heat it first... otherwise you will strip the thread instantly. And lo and behold...there is NO need for loctite here either. If you are still worried, use the weakest, small drop of green loctite.
And I don’t know why the part shown at 5:05 is needed... it doesn’t hold anything... thank God there is not a single situation in the world where you need to unscrew it. and If you really want to... you won’t be able to. it was fucking glued or welded by some asshole during assembly.
but despite all this... the gun is just awesome)
Thank you Sir
Whoever assembled my ssp5 in the factory stripped the screws of my ssp5, very disappointing
Same
I had the same issue with the barrel set screw. Couldnt remove the 4.3” barrel to install the 6” barrel
The screws of all airsoft guns are made of paper i messed up my krytac screws aswel