Around 4:26 it looks like the cooler is rocking when he installs the forward fan. That’s what it looks like. Did he not tighten down the screws enough? If this is normal it’s a bit strange, when it moved you know the thermal paste was lifted and that’s not good. In my opinion that plate should have 4 screws holding down that beast not 2.
lol look at the x299 launch and tell me intel is "quality" not just a gimmick to attempt to compete with amd threadripper. Also lets take a look at the ipc improvement over the last 4 generations of intel cpus, oh whats this 3.8% since sandy bridge? And whats amds ipc improvement from the last generation of cpus? 40%. Intel fan boy.
Could you guys please tell me what was the total height of that CPU cooler when adjusted for these RAM? Wondering if that exact setup would fit into a Core P5 with its 180mm CPU cooler clearance
I have an A2 error when booting up the pc. No image comes up on the monitor. Manual says it’s an SATA error but I’ve tried everything. Any suggestions on how to fix this issue?
You can’t see your fans in the bios? Does the fan hub connect to the motherboard in any way? I would rather use the motherboard fan headers and control them in the bios and windows?
Well-why don't you purchase fan controller?There are some inexpensive ones.I'm guessing they have dissable the option as a safety mesurment in regards to people that would go thre and do a mess.
Well, I already have a MB with 8 PWM fan headers, no need to buy anything... That's the point I'm trying to make, why give us a crap fan/led controller when every MB has great fan support. I do have a RGB controller that connects to the MB however. Another funny thing is, if you buy another one of those cooler master LED strips that comes with the 5t case, they don't support the LED section of that controller? They only make them for SATA power and not 3 pin support. So you have to get out your're tools and build a cable for it. I think they were drunk when they came up with this.. Its supposed to be one of their flagship cases too. They don't answer emails, or return phone calls.. "Cooler Master" No its "Cooler Lamer".
in stead of the EVGA GeForce GTX 1080 Ti im going with the Asus rog geforce gtx 1080 ti directx 12 strix and the ram of the Corsair Vengeance 32GB (4x8GB) DDR4 3000
Panda 8 My Taco If you get a ssd your will super fast at booting up and data transfer and if you get a hard disk drive the speed will be slow but you will get tons of space to play with it....So it depend on you what you choose
I’m going to do the same thing and it is worth it in $$. Put the stuff you’re going to play or use every day on the ssd and shit like movies and music games you don’t play much on the hdd that way you’re comp will stay fast and you will have a quick boot up and you’re fave game will be a few secs faster.
Nick Reggae Acer Predator 27 inch 1440p TN 144hz/165hz OC goes on sale at times for ~$480 regularly $600+. I have it and it is amazing. Uses a very high end TN that has great color. IPS version is like $700+. I find it pairs perfectly with my 1080ti FTW3
T B Hey thx for the reply. I actually live in Australia so a Monitor like this is more like 899 for me. Funnily enough I think I've decided on the asus pg279q. It's apparently the best so far and it comes with everything 1440p 165hz IPS and 1ms. In oz it's like 1099 but I feel like it will be worth it coz it won't need replace it for years
Nick Reggae you have to buy a good monitor if you got that build (7700k+1080). You got to go for a 144hz full hd (or 2k) if you wanna use the high ipc of the gpu (and that s the only reason why your cpu is still worth)
If you have a good motherboard that controller is useless, I have this case and I don’t plan on using it. My motherboard has 6 fan headers, led and rgb support. I changed the front fans to rgb and added another 140. Also added a back and top rgb fan. You can’t connect that controller to the motherboard for fan control or monitoring. 😂 really?
Allie Boy Not always, I can change my settings in cpuz to both or either. Not a new builder, just haven’t done it in a while. I was building Pc’s while u were watching Elmo.
Freedom Fighter 'i cant afford it so i need to put someone down to feel better' A) looks better B) Def future proof unless ddr5 which will take atleast 3-4 more years C) Why. The. Fuck. Not.
How do you say that you are building a high end system, and use an old fashion huge bulky air cooler on the cpu??? Ridiculous! That is ugly as hell... That was all I needed to see, and my impression is negative with this video. That is about as bad as installing a cdrom on a high end system these days. Also, how can he say that he's disappointed with there not being a quick release for the side panels???? What are you talking about? That is a quick release! On almost every other tempered glass case, there are four thumb screws to remove to get them off. Try to get all four of those off before I turn my key. And that is IF you even leave them locked. I have this case, and leave the front side unlocked, as the magnetic holds it on, and there's a stopping point a few inches out even if it did open. So you can't get anymore quick release than that. You guys seem to be okay guys, but the side panel comment, and using a gigantic aircooler on the cpu of a highend system like this, is almost insulting... It ruins the entire aesthetic of the system, not to mention making it impossible to get in there and do anything without removing it. Horrible. Okay, I'm done. Lol.
I agree about the big ass air cooler looks bad and sounds noisy and is no where near as good as if they used a 120-140mm liquid cooler specially if you’re over clocking it. I believe they had to use it since they got it for free. And idk what he was talking about quick release for side panels lol
This cooler is actually unbelievable, temps are way lower than 2 water cooled AIO’s I had as well as a friends. They are not ugly and very straightforward and configurable easy to install, but you should read the instructions. They will never leak and basically last forever, just change the fans if need be. Cooler is quite as can be. They have a 2 stage fan adjustable brackets for memory clearance. They also give you the choice to use any Led/RGB 140/120mm fans if you like with the included 120mm brackets. They sell a ton of these on eBay, why do you think it went to 140$ US then back to 119$. A very solid product for sure, if you’re not into water cooling for obvious reasons... Yes, there are plenty of other coolers out there that work similar, but these are one of the most effective and attractive with 3 difference top faces. I purchased another one after my AIO started leaking after 2 months, I’m done with water cooling with these all in ones. If I go back it will be custom. Don’t listen to any negativity, they keep your overclocked cpu cool as a cucumber 🥒.
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
What’s impressive is you were able to use that memory with that cooler. Those sticks are high! Good to know.
Appreciate the hard work y'all put in to these videos
Have you guys ever thought about doing a video where after you do a build you show how you setup Windows 10 step by step?
Next build - threadripper
Guys I liked you two and your work.
Great job
Around 4:26 it looks like the cooler is rocking when he installs the forward fan. That’s what it looks like. Did he not tighten down the screws enough?
If this is normal it’s a bit strange, when it moved you know the thermal paste was lifted and that’s not good.
In my opinion that plate should have 4 screws holding down that beast not 2.
Other youtubers be like: HOLY S@#T THREADRIPPER
PCPartPicker: Lets make a i7-7700k build
"Note: This is an archive from a livestream originally aired via twitch.tv/pcpartpicker on May 26, 2017."
Roro oh i didnt notice that xD my bad~
Mark Adrian Gabis yr referring t Americans !
lol look at the x299 launch and tell me intel is "quality" not just a gimmick to attempt to compete with amd threadripper. Also lets take a look at the ipc improvement over the last 4 generations of intel cpus, oh whats this 3.8% since sandy bridge? And whats amds ipc improvement from the last generation of cpus? 40%. Intel fan boy.
Syuna 4Head
Pretty much exactly my build with the exception of the CPU and mobo. Since I have 1800x
I would love to see you guys build a small form factor i9.
Jeff Gillis its not pratical the i9 will melt the system
This is what I live for
You can have almost how much thermal paste as you want
Clean both the IHS and the cooler back plate with 99% Isotropic alcohol , let dry. Sometimes there is residue on those surfaces.
With this cooler did the side lid go on ok ? Also @14:30 the cooler moves didn’t you tighten the nuts up ?
Nice build
will this case hold a E-ATX (up to 12" x 10.7") motherboard without covering the 3 cable management holes inside the case?
Could you guys please tell me what was the total height of that CPU cooler when adjusted for these RAM? Wondering if that exact setup would fit into a Core P5 with its 180mm CPU cooler clearance
You guys are awesome
That cooler is blocking the trident and that motherboard's red accent... not good aesthetically for me.
I have an A2 error when booting up the pc. No image comes up on the monitor. Manual says it’s an SATA error but I’ve tried everything. Any suggestions on how to fix this issue?
How come you guys never use the box the motherboard came in to sit the motherboard on top of to put it together?
Toonami30 because they own a table
please make a build video in new release cooler master cm 590 III case
There are no magnets holding on the glass panels!
damn this pc looks so lit already 18:36
It's Tomax and Xamot!
wtf I just put this part list together on your website yesterday haha. well at least mobo cpu and gpu.. haven't watch pass that.
hi, what was the molex for? (front panel, but what exactly?) 30:27
szperaczgmeracz does anyone know what it's for? I have this case but did not plug it in.
According to this review hexus.net/tech/reviews/chassis/100171-cooler-master-mastercase-maker-5t/ it's for the front panel illumination.
szperaczgmeracz thank you!
szperaczgmeracz watch the whole video next time
i.makeagif.com/media/5-09-2016/7LT5_q.gif
You can’t see your fans in the bios? Does the fan hub connect to the motherboard in any way? I would rather use the motherboard fan headers and control them in the bios and windows?
Well-why don't you purchase fan controller?There are some inexpensive ones.I'm guessing they have dissable the option as a safety mesurment in regards to people that would go thre and do a mess.
Well, I already have a MB with 8 PWM fan headers, no need to buy anything... That's the point I'm trying to make, why give us a crap fan/led controller when every MB has great fan support. I do have a RGB controller that connects to the MB however. Another funny thing is, if you buy another one of those cooler master LED strips that comes with the 5t case, they don't support the LED section of that controller? They only make them for SATA power and not 3 pin support. So you have to get out your're tools and build a cable for it. I think they were drunk when they came up with this.. Its supposed to be one of their flagship cases too. They don't answer emails, or return phone calls.. "Cooler Master" No its "Cooler Lamer".
How did they install the OS? USB?
When can we expect a Threadripper livestream? Sometime after the 10th?
in stead of the EVGA GeForce GTX 1080 Ti im going with the Asus rog geforce gtx 1080 ti directx 12 strix and the ram of the Corsair Vengeance 32GB (4x8GB) DDR4 3000
why not master liquid maker 92
lol i have never used a anti static band by any kind i've been buliding pc's for a very long time and never had problem's but kool vid
Why no ryzen?
da menos resultados en juegos
Dickbuttman _ let's just say that ryzen isn't really high end
keen yosimite snipers 1700?
keen yosimite snipers it is lol
keen yosimite snipers fanboy spotted
is this in Canadian dollars or american plz i need answers
American
I recommend you to use pcpartpicker.com if u wanna build your own pc
thank you!
Is it worth it to buy a 256gb m.2 SSD and a 1tb hard drive? That's what I'm planning on doing so I would like to hear your opinions
Panda 8 My Taco Yeah
Panda 8 My Taco depends. If you want tons of games without deleting them no. If youre fine with deleting a few once done yes.
Panda 8 My Taco If you get a ssd your will super fast at booting up and data transfer and if you get a hard disk drive the speed will be slow but you will get tons of space to play with it....So it depend on you what you choose
I’m going to do the same thing and it is worth it in $$. Put the stuff you’re going to play or use every day on the ssd and shit like movies and music games you don’t play much on the hdd that way you’re comp will stay fast and you will have a quick boot up and you’re fave game will be a few secs faster.
Wtf its like you can read my mind... Swap 1080ti or a vega 64 (hopefully) and you got my build
綠衣服 手上那條線是啥
don't know y...but i like to a watch INTEL build pc more than an AMD build......lol
Asim Das amd sucks
ok calm down fanboys
Ryan?
Threadripper build?
They need to redo their sub 1000 builds, like 700/900 builds
Almost identical to the build I'm well.... building. What's a good monitor to go with this that isn't going to break the bank
Nick Reggae Acer Predator 27 inch 1440p TN 144hz/165hz OC goes on sale at times for ~$480 regularly $600+. I have it and it is amazing. Uses a very high end TN that has great color. IPS version is like $700+. I find it pairs perfectly with my 1080ti FTW3
I totally forgot to say that this is a G-sync monitor. Which is amazing to use.
T B Hey thx for the reply. I actually live in Australia so a Monitor like this is more like 899 for me. Funnily enough I think I've decided on the asus pg279q. It's apparently the best so far and it comes with everything 1440p 165hz IPS and 1ms. In oz it's like 1099 but I feel like it will be worth it coz it won't need replace it for years
Nick Reggae you have to buy a good monitor if you got that build (7700k+1080). You got to go for a 144hz full hd (or 2k) if you wanna use the high ipc of the gpu (and that s the only reason why your cpu is still worth)
Freedom Fighter I'm actually going for the pg279q
cooooooooooooooooooooollllllllllllllllllllllllllll
Please make an ULTIMATE AMD build; Threadripper + vega.
*I will subscribe , like the video , and pretend that the build is for me.*
Please nzxt noctis 450 build.
Like if you agree
hello guys I have a question?
Is a ryzen 5 1400 , 1500x worth it for a budget build as a first time builder?
r3 1200 es buena opcion!
I would invest in a 1400 and then get a b350 motherboard for overclocking
A. Tority thats whati was thinking!
It on your budget, but if you can, please go with the 1500x.
She would serve all your gaming needs well, just get a b350 motherboard, so you can overclock her.
my build is gonna be similar except it's an asus gtx 1080ti, ryzen 1700X, corsair LED, and X62 and the rest is the same
I'm Brazilian, please put language translation into Portuguese for video [legend]
If you have a good motherboard that controller is useless, I have this case and I don’t plan on using it. My motherboard has 6 fan headers, led and rgb support.
I changed the front fans to rgb and added another 140. Also added a back and top rgb fan. You can’t connect that controller to the motherboard for fan control or monitoring. 😂 really?
Do 3$ 2k gaming build 120+ fps.
Jk.
oh! im not too late
98c or f?
Markinpuff wtf do you think
Allie Boy specifics are always good.
Markinpuff PC temps are always in Celsius, noob
Allie Boy Not always, I can change my settings in cpuz to both or either. Not a new builder, just haven’t done it in a while. I was building Pc’s while u were watching Elmo.
schooling
i prefer the other guy for building pc instead of the left guy
32gb ram for what??? ....nosense....
Freedom Fighter 'i cant afford it so i need to put someone down to feel better'
A) looks better
B) Def future proof unless ddr5 which will take atleast 3-4 more years
C) Why. The. Fuck. Not.
hodorr!!!!!
Teofilus Trifosa I don't want to spoil, but Hodor becomes a frozen zombie 🤓
Z
If I were you I'd put a Ryzen 7 1700 in there instead of the i7 7700k
It is slower in games than i7.
GBCAwesome Yea if u live in a paralel world where lower fps is better
You must play at 1080P and need 144 fps and do nothing but play games on your PC? Congrats I guess?
GBCAwesome uhh no
Ugly case
its assrock not a s rock
second maybe?
Can I have it
JanDaBaboon no
How do you say that you are building a high end system, and use an old fashion huge bulky air cooler on the cpu??? Ridiculous! That is ugly as hell... That was all I needed to see, and my impression is negative with this video. That is about as bad as installing a cdrom on a high end system these days. Also, how can he say that he's disappointed with there not being a quick release for the side panels???? What are you talking about? That is a quick release! On almost every other tempered glass case, there are four thumb screws to remove to get them off. Try to get all four of those off before I turn my key. And that is IF you even leave them locked. I have this case, and leave the front side unlocked, as the magnetic holds it on, and there's a stopping point a few inches out even if it did open. So you can't get anymore quick release than that. You guys seem to be okay guys, but the side panel comment, and using a gigantic aircooler on the cpu of a highend system like this, is almost insulting... It ruins the entire aesthetic of the system, not to mention making it impossible to get in there and do anything without removing it. Horrible. Okay, I'm done. Lol.
Stev A You know they just Build it for someone? Not actually their pc.
I agree about the big ass air cooler looks bad and sounds noisy and is no where near as good as if they used a 120-140mm liquid cooler specially if you’re over clocking it. I believe they had to use it since they got it for free. And idk what he was talking about quick release for side panels lol
Stev A. You need some sunshine dude...
This cooler is actually unbelievable, temps are way lower than 2 water cooled AIO’s I had as well as a friends. They are not ugly and very straightforward and configurable easy to install, but you should read the instructions. They will never leak and basically last forever, just change the fans if need be. Cooler is quite as can be. They have a 2 stage fan adjustable brackets for memory clearance. They also give you the choice to use any Led/RGB 140/120mm fans if you like with the included 120mm brackets. They sell a ton of these on eBay, why do you think it went to 140$ US then back to 119$. A very solid product for sure, if you’re not into water cooling for obvious reasons... Yes, there are plenty of other coolers out there that work similar, but these are one of the most effective and attractive with 3 difference top faces. I purchased another one after my AIO started leaking after 2 months, I’m done with water cooling with these all in ones. If I go back it will be custom. Don’t listen to any negativity, they keep your overclocked cpu cool as a cucumber 🥒.