What is so remarkable about this job is her ability to quickly assess the possible damages and consequences given the rationale beyond the current problem with the engine and its design and past reliability is fairly obvious repair
Chào buổi sáng, người thợ cơ khí xinh đẹp yêu thích của tôi. Đây là video hay nhất trong tất cả các video của bạn. “Người phụ nữ khôn ngoan làm theo lời khuyên tốt” khi sử dụng máy chà nhám và thay gioăng. Công việc của bạn là rất tốt. Chúc mừng. Ôm 🇧🇷🇧🇷🇧🇷
You can perchise a set of feeler gages for really cheap and are good to have when working with small and large engines 😊PS you should be able to get them were ever you get your tools 🔧 from 😊
Never put lubricant between the connecting rod and the bearing. Put it together 'dry' and then lube the side of the bearing that touches the crankshaft. Lubing between the bearing and the connection rod increases the change of spinning the bearing. Other than that it looks good.
A good video.Very happy to old broken stuff repaired.The reason the motor did not run smooth may be because you didn't RE-ADJUST the valve clearance AFTER you put the head back on.And when ever a ROD with bearing are replaced the clearance with the crankshaft MUST be checked.most of the time it will be .001-.002.Making the gasket for the valve cover yourself is very smart.good job.
I bet you probably wash your hands 5 times and it still smells like grease and gasoline that's the perks of the job getting down and dirty great job getting the 173 up and running😀👍
Dear Genius Girl if you made a victory dance for the platinum RUclips plaque I know you're going to get. I swear to you that this dance will spread like wildfire and I can already see the dancers dancing the Genius Girl Dance all over the globe.
No way she started that engine by herself without it hard mounted. I just bought a 173 on amazon, and with me holding it down (I'm ~250lbs), and my 30yr old weight lifter son could not get it started. After the engine rotated beyond the compression release and hit the next compression stroke it stops the piston dead. I guess I would expect that with the cylinder pressure at about 325lbs. If it were hard mounted you can get more speed on the rope and get past the compression cycle & start the engine.
I swear every bolt on that thing was loose ? I think the whole video is faked , there is no way the crank journal would look perfect after throwing a rod.
I think you're fake you don't exist 😂 who cares if it's fake or not it's entertainment the video doesn't say learned from me...every country has its idiots and you're one of them 🤣
A mon avis tout ca c'est du pipo. A-t-on déjà vu des boulons se dévisser aussi facilement avec un moteur dans cet état. Aucune résistance. Puis elle ne repère même pas la longueur des vis qu'elle dépose du carter moteur alors qu'à l'évidence ils n'ont pas tous la même longueur. Comme on dit c'est du " cinéma"
Gran video!! Muy buen trabajo y restauración😊😊
Entertaining video, easy to watch. 👍
Hi you have skills that a lot of young people don't use and you make the difference in the world we all live in❤
What is so remarkable about this job is her ability to quickly assess the possible damages and consequences given the rationale beyond the current problem with the engine and its design and past reliability is fairly obvious repair
Well done,, another great restoration,,enjoy your beautiful life,,❤uk
She is amazing
Поздрави от България!
Благодаря и успех!
Señorita mis respetos Excelente trabajo y le mando su merecido like desde Monterrey NL México 🇲🇽 Saludos y bendiciones 👍♥️
Красивая работящая девушка! Приносящая большую пользу людям! Дай Бог что бы у Вас было всё хорошо, и много клиентов с огромной радостью!
amazing lady. gorgeous. keep going. you are fantastic. geniu. Today young people are only w/SMART phone nothing more.
Aí faz frio moça aqui no Brasil tá muito quente 😂
Very good work, young lady
Em sửa máy hay quá
Great work. Well done. Lady. Great video! 🙂🙂🙂
Hola amiga el video estubo muy entretenido saludos de su fan ecuatoriano 👍👍
I like so much your job, congratulation. Were are you from? Your country.
สุดยอดคนเก่งเลยครับ
merhaba türkiyeden selamlar tebrik ederim
Your not only a genius also beautiful girl
Brilliant job well done you can fix anything X❤
Fine job. Done with care. Well done, I enjoy your videos 👌
Love Love you 💖😘❤
👍👍❤️
너무너무 깨끗하게 잘고처요 열심히 하세요 감사합니다
🥰
I really enjoy the skills of someone who repairs rather than the culture of throw out and replace.!
Chào buổi sáng, người thợ cơ khí xinh đẹp yêu thích của tôi.
Đây là video hay nhất trong tất cả các video của bạn.
“Người phụ nữ khôn ngoan làm theo lời khuyên tốt” khi sử dụng máy chà nhám và thay gioăng.
Công việc của bạn là rất tốt.
Chúc mừng.
Ôm 🇧🇷🇧🇷🇧🇷
No sé pone aceite.a.la
Biela.antes de poner el
Babbit es bueno echarle
Un poquito de aceite
Al cigüeñal leva y teclado antes de montar
Es pre lubricar
You can perchise a set of feeler gages for really cheap and are good to have when working with small and large engines 😊PS you should be able to get them were ever you get your tools 🔧 from 😊
Never put lubricant between the connecting rod and the bearing. Put it together 'dry' and then lube the side of the bearing that touches the crankshaft.
Lubing between the bearing and the connection rod increases the change of spinning the bearing.
Other than that it looks good.
A good video.Very happy to old broken stuff repaired.The reason the motor did not run smooth may be because you didn't RE-ADJUST the valve clearance AFTER you put the head back on.And when ever a ROD with bearing are replaced the clearance with the crankshaft MUST be checked.most of the time it will be .001-.002.Making the gasket for the valve cover yourself is very smart.good job.
thanks
Looks very like the kubota 6hp
muito linda vc
วีดีโอดีๆ ดีใจมากที่ได้ซ่อมของเก่าที่พัง สาเหตุที่มอเตอร์ทำงานไม่คล่องอาจเป็นเพราะคุณไม่ได้ปรับระยะวาล์วใหม่หลังจากที่คุณใส่หัวกลับเข้าไปแล้ว และเมื่อไรจะเปลี่ยน ROD พร้อมลูกปืนด้วย ต้องตรวจสอบระยะห่างกับเพลาข้อเหวี่ยง ส่วนใหญ่จะอยู่ที่ .001-.002 การทำปะเก็นฝาครอบวาล์วด้วยตัวเองนั้นฉลาดมาก ทำได้ดีมาก
I bet you probably wash your hands 5 times and it still smells like grease and gasoline that's the perks of the job getting down and dirty great job getting the 173 up and running😀👍
Hey, Awesome job . Do you work bigger stuff ?
🧡🧡🧡👍👍👍👏👏👏💯💯💯
💥💥✋✋
Dear Genius Girl if you made a victory dance for the platinum RUclips plaque I know you're going to get. I swear to you that this dance will spread like wildfire and I can already see the dancers dancing the Genius Girl Dance all over the globe.
❤️❤️
Muka mu mengingatkan ku pacarku dulu yang kini hilang enta kemana beb❤
No way she started that engine by herself without it hard mounted. I just bought a 173 on amazon, and with me holding it down (I'm ~250lbs), and my 30yr old weight lifter son could not get it started. After the engine rotated beyond the compression release and hit the next compression stroke it stops the piston dead. I guess I would expect that with the cylinder pressure at about 325lbs. If it were hard mounted you can get more speed on the rope and get past the compression cycle & start the engine.
what was broken in this engine?
With all the dust, debris, grease, diesel and paint stripper fumes... The grains being dried behind you must be 😭😭😭
Somebody buy this girl a torque wrench.
👍👍👍👍👍💘💘💘💘💘💝💝💝💝💝💖💖💖💖💖
💋💋💋💋💘💘💘💘❤❤❤❤❤❤❤❤🇱🇧🇱🇧
I swear every bolt on that thing was loose ? I think the whole video is faked , there is no way the crank journal would look perfect after throwing a rod.
I think you're fake you don't exist 😂 who cares if it's fake or not it's entertainment the video doesn't say learned from me...every country has its idiots and you're one of them 🤣
Pseudo Genius girl appears to repair engine.
A mon avis tout ca c'est du pipo. A-t-on déjà vu des boulons se dévisser aussi facilement avec un moteur dans cet état. Aucune résistance. Puis elle ne repère même pas la longueur des vis qu'elle dépose du carter moteur alors qu'à l'évidence ils n'ont pas tous la même longueur.
Comme on dit c'est du " cinéma"
yie yiem meiv guoqv
❤️❤️
@trieuthiduyen1994 ❤❤❤