I think it's important to note that the machine has a switch on the right side underneath the machine to deactivate/activate the ECO-Mode. Either action will be displayed on the timer with a crossed E or an E telling you which mode the machine will be in. Also good to know: The machine will stay in whatever mode you set, even after switching the machine off and on, until you choose to change that with the mentioned switch.
Not sure where it measures from. Mine is the same.cold there is not reading, hot it can read nothing or anywhere from nothing to 9. When you activate the pump, it will zip up to 9. When you preinfuse, it will drop to zero. It will preinfuse a bit faster if the gauge was reading higher.
Will be visiting Seattle next month and SCG is on our list of places to visit...though I fear it will be a costly visit if I look to close at these Rocket's :)
If the meter is showing almost "9" 2:15 when the brew head is completely empty then how does it show "8" 2:52 when your grounds are in the brew head but are too coarse? Are these gauges rocket uses matched quality with the rest of the machine?? Can they be calibrated to an expected level of accuracy when they are off this far?
I just bought one. Mine doesn't do that. The only time that gauge drops is if I use the hot water attachment and run a lot of water out of the boiler and it is filling up. This happens when you use the hot water attachment. I don't know how hot the machine was in the video or if for some reason the boiler was filling. The gauge would read low until the boiler is full and at pressure. If the boiler is filling the pump is going while you are NOT pulling a shot. To get the gauge to drop, you'd have to pull shots with a cold machine or just let it excessively run so it has to fill the boiler. A fast running shot will not affect the gauge unless it just isn't up to temp/pressure.
I don’t see any technical advantage between that and the Mozzafiato. Is there any or it’s purely a layout thing? I bought the Evo-R timer and it was the best purchase I ever did in my life. Will brew something right now to celebrate. Thanks Gail!
My new machine doesn't switch itself off , Does that mean I got a dud , I accidentally left it on and it was on all day .Its the same machine 3 days old and the water lid has broken already , (plastic has fallen out because of broken clips )the steam wand struggles to froth milk to latte art standard as the pressure drops to low when steaming , and two cups in a row is no go without waiting 5 mins. I also need to wait a few minutes after pulling a shot for the steam in the tank ,even though it shows one bar of pressure ,if I froth straight away the pressure drops to .4 bar which I find is no good for getting silky milk with good froth. Any ideas for a remedy other than cutting my losses selling it and buying a dual boiler machine of a different brand . Definitely disappointed so far with this one .
Word on the street is that Rockets exported to the US will not have ECO mode that shuts the machine down after 90 minutes. Can someone at SCG verify that? Good thing for us if that's true - ECO mode is more of a hindrance than a help. It's evidently a requirement in EU.
I dunno about the US-Models, because I have a EU-Model, but eitherways it doesn't matter as the machine has a switch on the right side underneath the machine to deactivate/activate the ECO-Mode. Either action will be displayed on the timer with a crossed E or an E telling you which mode the machine will be in. Also important to know: The machine will stay in whatever mode you set, even after switching the machine off and on, until you choose to change that with the mentioned switch.
The good : reliable///nearly 10000 shots only steam noob gasket leaking drops. Much Quieter than V pump///works like belt drive garage door opener compare with chain drive. The BAD: small water tank ///seems only designed for plan B. All E61 may burns your arm /// if u just wake up without eyes fully open. Small tray cause Desk wet/// need extra tray when brush cleaning like Silvia. Weak steam/// not because my steam gasket start leaking! Over all for not wake my baby up , it was a good buy:/
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I use this as my ASMR to fall asleep. Love the reviews and I have an expresso but watching her is soooooo relaxing.
J.V.N what’s an Expresso?
@@matthunt9241 It's a very fast espresso, I guess?
Would love to know where you get the container for your old grounds. Love the idea of being able to store them after use!
Love your videos Gail. In Australia here and your videos are very thorough and very well-explained for the novice. Thanks a million 👌
this channel would be nothing without you :)
I think it's important to note that the machine has a switch on the right side underneath the machine to deactivate/activate the ECO-Mode. Either action will be displayed on the timer with a crossed E or an E telling you which mode the machine will be in. Also good to know: The machine will stay in whatever mode you set, even after switching the machine off and on, until you choose to change that with the mentioned switch.
I have the one without the timer but I’ve gotten really good at counting to 30 seconds in my head after making 1250 cups past few years
Love these reviews. Keep them coming!
very thorough review, thank you
Why was the gauge at 9 bar with nothing in it? 2:14
Not sure where it measures from. Mine is the same.cold there is not reading, hot it can read nothing or anywhere from nothing to 9. When you activate the pump, it will zip up to 9. When you preinfuse, it will drop to zero. It will preinfuse a bit faster if the gauge was reading higher.
Great review, Gail!
Does it comes with two spouts a single and a double, in the box straight from the factory or is this an option to buy a single or double?
Can eco mode be turned off or bypassed?
Is it normal for the machine to drop to .5 bar when steaming as in the vid .
Can you do a pre infusion?
Where did you get that T shirt??? Love it
barkstamassi it had a rocket logo on the back so probably they gave it to her
Is there a way to extend the 90 min timer? 90 min is too little, this should be configurable!
Will be visiting Seattle next month and SCG is on our list of places to visit...though I fear it will be a costly visit if I look to close at these Rocket's :)
Can this be used to sell coffee at a farmers market?
I hate watching rocket espresso machines reviews like I can afford it🤡🤡🤡
Imagination is a good idea
If the meter is showing almost "9" 2:15 when the brew head is completely empty then how does it show "8" 2:52 when your grounds are in the brew head but are too coarse? Are these gauges rocket uses matched quality with the rest of the machine?? Can they be calibrated to an expected level of accuracy when they are off this far?
I just bought one. Mine doesn't do that. The only time that gauge drops is if I use the hot water attachment and run a lot of water out of the boiler and it is filling up. This happens when you use the hot water attachment. I don't know how hot the machine was in the video or if for some reason the boiler was filling. The gauge would read low until the boiler is full and at pressure. If the boiler is filling the pump is going while you are NOT pulling a shot.
To get the gauge to drop, you'd have to pull shots with a cold machine or just let it excessively run so it has to fill the boiler. A fast running shot will not affect the gauge unless it just isn't up to temp/pressure.
I don’t see any technical advantage between that and the Mozzafiato. Is there any or it’s purely a layout thing? I bought the Evo-R timer and it was the best purchase I ever did in my life. Will brew something right now to celebrate. Thanks Gail!
I love my 10 yr. old Giotto . It has reliably made me thousands of great shots! 😎
Coincidentally I have the same eureka perfetto grinder as showing in Gail's demo. 👍
Mozzafiato is just an asthetic difference. Straight aluminum side panels instead of curved stainless.
Question: is it recommended for small coffee shop?
Nope boiler to small for that
My new machine doesn't switch itself off , Does that mean I got a dud , I accidentally left it on and it was on all day .Its the same machine 3 days old and the water lid has broken already , (plastic has fallen out because of broken clips )the steam wand struggles to froth milk to latte art standard as the pressure drops to low when steaming , and two cups in a row is no go without waiting 5 mins. I also need to wait a few minutes after pulling a shot for the steam in the tank ,even though it shows one bar of pressure ,if I froth straight away the pressure drops to .4 bar which I find is no good for getting silky milk with good froth. Any ideas for a remedy other than cutting my losses selling it and buying a dual boiler machine of a different brand . Definitely disappointed so far with this one .
Can you review la pavoni baretto
Hi Gail, quick question. Is it possible to purchase the Giotto's feet and use them on the Mozzafiato?
Yes, and don't call me Gail.
Word on the street is that Rockets exported to the US will not have ECO mode that shuts the machine down after 90 minutes. Can someone at SCG verify that? Good thing for us if that's true - ECO mode is more of a hindrance than a help. It's evidently a requirement in EU.
I dunno about the US-Models, because I have a EU-Model, but eitherways it doesn't matter as the machine has a switch on the right side underneath the machine to deactivate/activate the ECO-Mode. Either action will be displayed on the timer with a crossed E or an E telling you which mode the machine will be in. Also important to know: The machine will stay in whatever mode you set, even after switching the machine off and on, until you choose to change that with the mentioned switch.
Love the videos but tasting a drink with milk likely makes it difficult to evaluate the shot quality.
The good : reliable///nearly 10000 shots only steam noob gasket leaking drops. Much Quieter than V pump///works like belt drive garage door opener compare with chain drive. The BAD: small water tank ///seems only designed for plan B. All E61 may burns your arm /// if u just wake up without eyes fully open. Small tray cause Desk wet/// need extra tray when brush cleaning like Silvia. Weak steam/// not because my steam gasket start leaking! Over all for not wake my baby up , it was a good buy:/
Rocket now call them “Cromometro R”
I'm selling my Breilting Colt to be able to get this machine..LOL!!
Don't think I like the auto shut-off. That can cause problems if you're entertaining and just want to set it to ON. Hope it's selectable.
I miss Gail
Nice garlic