Rebuilding A Wrecked 2022 Mercedes G63 G Wagon PART 12
HTML-код
- Опубликовано: 28 окт 2023
- This build is basically finished!!! We are wrapping up all of the little things and everything is looking so good. The best part would have to be the 1886forged wheels that we put on the g63. This build is so close to being fully finished and we hope that the limp mode isnt nothing too crazy! Thanks For Watching!!!
1886 Wheels: 1886wheels.com/ 
Хобби
![[ GUILTY GEAR STRIVE: DUAL RULERS ] Teaser Trailer](http://i.ytimg.com/vi/e4TDqaE3XAg/mqdefault.jpg)
limp mode isn't because of the alignment, you've got 1 or more cylinders misfiring
You can clearly hear the misfire. It sounds bad, you guys need to stop driving it until this is figured out. My guess is bent valve or bent rod from oil in the motor after roll over and trying to start it with oil in the cylinder
yes 100%
@@shortbals considering how long they’ve been working on cars your’d of thought even they could hear it’s misfiring
It sounds like a tractor
Not sure that Armytrix exhaust is doing much for it either!
As much as I like the vehicle rebuilds, I also really love the property/house build videos!
Keep running it like that. The motor loves it
😂
Theyre rich af bro. They dont care about blowing up an AMG motor
I CANT WAIT FOR THE NEW HOUSE BUILD 💯
someone must've briggs & stratton swapped that g wagon
Haha.... 100%. Sounds like a riding lawn mower.
😂
Cammed out Briggs and Stratton lol
My $10 push mower found in the swamp runs better than that $265k g-wagon.
I thought it sounded like a VW Beetle (circa 1970's) - but you're right, haha - sound like a Briggs and Stratton swap
These guys crack me up. Driving a car down one or more cylinders misfiring.
Yeah flooring it to see if it will clear up ! Genius !
@@tnolan3176 If they continue to drive it like it is it's going to go "KA-BOOM".
and then keeps telling himself that it sounds good. Like are you nuts???
They have the code telling them what is wrong but they are looking at the wheel alignment lol.
wanna take a guess of what those 1886 wheels cost?? $3875 per wheel!!!!
I love how you guys act as brothers together including the way you act with family, I wish my family was more like that unfortunately not the case but with my wife and son I intend on making that happen
Awesome.Thanks for sharing and taking us along
I agree with the suggestion of getting the GWagon to the dealer. They can identify the issue and get this bad boy running! Nice work getting the G Wagon looking good.
may as well fix the whole car at the dealership, why bother having a rebuild channel.
I think it's a bent rod or valve
@@vadim7590may as well not make any comments. What you failed to see is that they have all of it finished. They do not know how to fix the engine issue. Bring that to someone who can. They had V-Tune in to assist with the framework. Now have the Mercedes Tech see if the engine can run right. Stop watching if you cannot be more positive. Now sit in the corner and be quiet.
@@samuelpancake4084 If they get it to a Mercedes Tech hopefully they can figure it out.
Vadim sounds like the type of person to take it to the dealership on the quiet then boast about how he fixed it,...@@franksattler6053
That windshield label will fade out in no time
Cold Revs will fix the misfire for sure 😂
Yeah jam the gas pedal to the floor while its cold !
Just rev it until it bangs out all the ruffles out .
Yah that’s going help
That's what the limp mode is for, it doesn't let you rev it past 3k and it revs slower than normal.
This might be my favorite build
Yeah, let the dealership deal with that. That will free up time for you guys. The thing looks sick tho!!!👍
So the codes are related to the VVT (variable valve timing)solenoids. They are electric and hydraulic controlled by engine oil. Have y'all changed the oil? If oil is contaminated, low, dirty, wrong weight, etc any of this can cause these codes, I'd recommend changing oil and filter first and if that doesn't fix, and wiring to them is ok, replace them.
Yeah, what happens is the mercedes cam advance uses oil pressure to push a locking pin. Once that locking pin dosent have the right pressure it dosent engage all the way and it elongates the hole it sets in. Consequently this causes the motor to run with the wrong cam profile. If one bank had this failure and not the other, it will reek havoc on the motor.
they changed the oil....
They are too dumb to do that.
Great work fellas!!! You guys never disappoint with your work.
G63 looks BEASTLY
Did you guys forget that the first house on top of the mountain was only put up as the first owner's granny apartment so he could have a place to move his elderly mom into. His main house was meant to be constructed at a ninety degree angle to that little house and possibly connect via the garage with a walkway. At least that's what you explained to us OGs way back then. You basically turned that lot's tiny one+den/bedroom guest cottage into the sole house on the main (highest) lot. Hopefully, you complete the compound in the future by properly building out that first lot for the parents.
Their parents just bought a better looking house. They’re not gonna move into that shit hole. Lol😂
@@TeeXclusive Having trouble reading apparently...
Absolutely wasn't suggesting their 'rents move into that existing tiny guest home. Since I don't stalk them, I have no idea what they moved into. I just knew they sold and moved. Some seniors just do a condo apartment thing for ease of maintenance and let the next generation take over the big holiday entertaining of the full family.
Wait. You think the 1st house on the mountain was OG status? Lol I’ve been here since they were building TJs under a pop up canopy tent in front of pops garage. That’s OG
@@The_regular Wow. You clearly have trouble with sentence comprehension! Sorry. I don't limit myself to a couple of hundred odd-character Twitter-style posts. At the same time, I am not some fanboy who needs to repeatedly brag a false claim of "First comment" or make copycat posts of adoration to a couple of grown men like a Swifty reaching out to their Goddess Taylor. I *would* gladly concede that you likely watched more than I did. I mostly skim through their stuff at 5x speed these last few years, TBH. All I wanted to convey was that I remembered what they told us at the start of that project. I did start viewing the channel very early in an irregular way. I'm not a boasting fan at all - just someone who was around long enough to witness them and their channel evolving. Also, they sometimes stated plans and then never acknowledged them again.
Carry on with your pwnage if you must though... I think that's what you jock-riders still call it.
Let's hope the new build is within 14 minutes and 59 seconds of Chattanooga, or else Klows will be pissed
Much love from South Africa❤,the newly crowned Rugby world champion 😂
Man, that G Wagon looks good, and the rims really set it off!! You guys are super talented!! That's what's up!!
I can see the family joining you fellas on that mountain, great work guys
Definitely 👍 would go with a modern home. You’ll never regret building something truly unique and geared towards your lifestyle 😊
Should build a stone home would blend in better with the mountain !
Should just build cars, being a car show and everything.
These guys are the king of unfinished projects
Actually seeing a G-wagon getting rebuilt instead of shredded is a blessing.
love the rim choice! you guys are AWESOME!
It sounds like that g wagon is missing a couple cylinders gonna have to fix that to be out of limp mode
Would love to see an old JDM build
product of hard work guys, thanks for sharing!
Great video and nice variety along with it not being a week between episodes. Thanks!
Look forward to watching all these videos now
Use your scanner ...go to live data.. see and watch the timing. See if it is reading right or no signal.. might be bad cam solenoids causing it to not work on those or possible cam phasers stuck from when it rolled over
This is exactly the issue. Hope they see this
Awesome job bringing that one back to life.
You guys do excellent work, you take your time and do it correctly.
Man, you knocked out just right this time with the wheels and tires combo. Looks amazing 🎉
You’ve done a fantastic job of bringing the Mercedes back. If you have a bent rod, your in danger of permanently damaging the block by running it. Just add another couple of videos for the engine, you’ll get more views because We love it.
Surely they’re reading these comments!! And surely they know that the engine is misfiring and not just in “limp” mode
I agree. I don't know why they need to rush it. This was a good build they should just take their time and figure out the problem. I am curious to know what it is.
G wagon is looking good, Great stuff guys thanks
It’s probably just something unplugged go thru everything bad ass build 🔥🔥🔥you got this 💪💪
good job guys G wagen looking sharp !
better leave it to the Mercedes shop for the engine if you dont know what's up with it.
Once you go Goon, You'll always be Tuned💯
They need to put this on a shirt.
That on a shirt would be sick!
Dont go goon go VTuned !!
My favorite part is when you apply the black goo. i love it. so satisfying
u guys can do anything, there is no such a hard thing for u guys, good job, amazing, keep the good work. Greetings from Mexico
this is incredible from the wreck it was before! keep up the good work!
Kudos to you guys for still putting in the work after you have made it
Appreciate what you guus are doing with the rebuild keep it up.
And to those who are bashing am sure no one here master automotive repair over night so lay off
In my opinion, besides the '67 Camaro, this is one of the best looking rebuilds you two have done
Looks great big job! I’d have the dealership figure out the limp mode deal.
I’d limit how much y’all run the Mercedes. Check the wiring in the engine bay. One may have been pinched. The cam phaser, sensor, or solenoid could have been damaged when it was wrecked
The more they run it the better it's sounding
You don't know what your talking about
@@6996brandylno it sounds like crap. It’s not hitting on all cylinders
These guys don't know what a "cam phaser" is, much less what it does and where it's located. They have very limited knowledge of the internal workings of automobile engines.
@@timglass6041 lol like you know anything dummy
It’s obviously the alignment drive it down the street a couple times that will fix it.
awsome G.WAGON .❤ . FALLING IN LOVE YOUR G.WAGON BRO 😢
G Wagon is on that Evil level, the wheels just made me fall in love, takes your breath away
It looks great guys. But it sounds like a bag of spanner’s at the moment. Maybe once you get it out of limp mode it will improve.
Sounds like a bag full of rocks in a washing machine !
I just finished building a house on my land with a view from the side of the mountain. Mostly windows, facing south, and 2400 sq ft on one level. You guys might be interested in the design.
The built looks good. Love the color. Congrats on the built
I like the wheel choice it looks really good. And love the house content. Cant wait to see what Elizar chooses for his house
I love the color and I love how amazing this truck looks. The new rims and tires are the icing and cherry on top of the G-wagon cake. LOL. I agree that the red calipers look better and tie in perfectly with the red on the rim caps. But overall EXCELLENT JOB !!!! I have to admit this build rates up there with TOP 5 AWESOME BUILDS: the Black Challenger, the Black Corvette, the Blue S500, the Blue ZL1-1LE, and the Track Hawk. I can't wait to see the Maroon Ford Diesel truck and the White Ram.
those wheels look really nice on the g ride. nice choice.
Looks good and sounds like a modern version of Chitty Chitty Bang Bang
Nice to see you back in no time keep it in entertaining us
Absolutely blown away by the progress on this G63! The 1886forged wheels are a perfect touch. Can’t wait for the final reveal. Thumbs up for the hard work! 👏
Get it to a Mercedes dealer and get the Engine come alive properly. Your missing a bunsh of cylinders. That engine Sound should give you goosbumps. That Sounds Like having a cold. Greetings Form Germany
Man... I'd give anything for that thing when you guys are done. Love this series, love your videos
You guys are great!
Man! Everytime you say that it sound good I am laughing 😂🤣😂
Trust me!! G63 shouldn't sound like this :D
Try swapping the solenoid to another cam, clear the fault and see if it follows.
I think they already . I think behind the scenes they built their parents a log cabin .
FINALLY NOW NEXT TO NEW BUILD.....CLASSIC CAR
Speechless all the time
Wouldnt a 2 story house give you a better view at the top? You could put like a patio/rooftop area to check out the view.
Wow u guys really are good in what u do
Those tires tie it together so well bros nice choice!
You guys the best working
I’m sure running it in limp mode that much is great for it. Y’all should get more help on cars when it’s out of your wheel house and not cause more damage.
But it’s your money.
Dont get your panty in a bunch negative Nancy these boys always figure stuff out
Just like they finish all of the vehicles one hundred percent. Half of the cars they work on would not be one piece if it wasn't for V Tune.
You need to give the g wagon to pops he deserves it. He also seems to like it
Don't forget moms who keeps everyone well-nourished.
thats a badass g wagon a dream of a car.. congrats guys.
enjoy the success..
one day ill have one..
The G63 really become amazing good job boys ❤
Great build guys, G wagon looks geart and those rimms suits the car perfectly. Limp mode can also be caused because of a misfiring fuel injector.
Could be just the spark plugs oiled up from when it turned over. It's looking really good 👍🏻
They’ve already checked the spark plugs it was clean
You really have done a fantastic job of fixing the g wagon bugger about the engine
To the shop I think is the best thing for it 👍👍🇦🇺
I would probably stop running it, great work
You need to get the downpipe coded into the g63 because its aftermarket. Needs tuned
I'd definitely say that the engine is out of its timing, maybe a chain guide or something snapped or misaligned in the impact, to be honest it sounds terrible and you will be amazed how dardy (Aussie for awesome) it will sound when you get the timing corrected.
dardy wtf are you smoking not an aussie term you either arent aussie or your from some backward town in the sticks!
insane!!! great job!
It looks insane
I am curious if Elizar will have well or again go with a cistern like at Simon's beautiful home! I remember the difficulty from the well at the original house on the mountain. Since you own a large piece, find a place to drill a large well and put in your own water system.....looks like you can afford it!
Ohhh yeah Goonzquad video are always on 🔥 😊❤
Great job guys
Congratulations on the 3rd house build!
G Wagon looks amazing and sounds like a old putt putt John Deere lol
I am assuming the timing chain jumped when it was rolled over, I had a Audi that was rolled over with very similar codes and symptoms as the G wagon, I would check that! Great video!!
The more they run it the better it's sounding
You don't know what your talking about
@@6996brandyl just an idea for them to check out, not saying that this is the problem
@@paulparty5132I think he was joking.
Looks beautiful
G wagon is sick looking
Unplugging the cam sensor is only gonna make it worse ... anything you do to it needs to be followed by a clear out of all codes with scan tool..
Not true. The mercedes ecu is extremely intuitive. Once the problem Is fixed the computer will recognize that it's working properly and "reset" itself..
I have that label printer, unfortunately the printing fades away in sunlight within months
Dash is fully tested. Legit
That's my dream car and you guys did a beautiful work
Love the videos of the g wagon, Would love to hear what happen with the r8. That car was a beast but you never brought it back from the shop and I wonder why.
Didn’t they trade it for the turbo kit from sheepy for the giveaway huracan?
@@NoTinkOG what I remember them saying is that they don’t have room and they left it their because of free storage lol which is bs 😂 some thing is not right maybe they just sold it or it got stolen and they not saying anything about it
@@Eli-jah098it's being repaired/retuned
@@Josh-pb5eo the shop fixed in in a day tho according to their video on their channel
@@NoTinkOGthat wouldn't be a fair trade at all 😅
Love from Jamaica 🇯🇲 ‼️‼️‼️
We deh ya !!🇯🇲❤
🇯🇲same here
Truck looks great. Both inside and out. Once engine gets going head turner like all the builds
Good Job guys!!
You guys need to put new coil packs in it. Hopefully then it will be running on all cylinders. I would also put new spark plugs. Can’t keep running her on 3 cylinders 😂
ahhahahah
The check engine light would be flashing and it probably would more likely be a sparkplugs on a car that's been upside down (but probably fix itself as the engine heated up) but ether way you could smell the exhaust when it first starts before the cats heat up. There is a good chance it's the camshaft position sensor.
It’s running on 1/8 of a cylinder 😂😂😂😂
The more they run it the better it's sounding
You don't know what your talking about
Like the silver brake caliper, the red takes away from the look of the new rims.
Yeah, Go with silver, looks good. the red doesn't match anything.
i love this journey
you got this, something head wreckingly simple will solve it