Chris , I’ve just watched your video on grading a road and I was touched by the fact that you let Matt enjoy that whole moment . You stood back , all three of you and didn’t jump in and take over . It was nice to see Matt have a live audience . He can’t see or hear me and the rest of us laughing at his comments or shouting “ Yes! ” when watching his videos . So it was good to see the banter you all had .
Considering she had one wheel in the grave, and was destined to become a I beam or something like that.. this is amazing and now she can not only have a second chance of life but tell her story to future generations. Well done Matt !!! Something to be proud of
From my earliest days, I've felt a need to save and restore unusual, even oddball equipment. As time goes on, more and more people recognize the rarity and are drawn to it. Because it's been saved, it's there to be appreciated for perhaps generations. Besides, I'm not cheap, I'm frugal. Nice job, Matt. To watch it working again was a real pleasure.
@@petero2693 It is. I did a journal entry this morning in Word Perfect on my Grid 1530. The OS is the last version of DOS. Some time this afternoon, I'll cut the grass on my Wheel Horse riding mower that was built during the Nixon administration. On the other hand, this laptop is a late model Lenovo machine running Linux. The old and capable survive alongside the new. I think that is as it should be.
One of my favorite restorations on RUclips! This part reminded me of when I was a teenager working in an auto parts store in Fairhope, AL... many of our customers were local farmers, and they were always coming in looking for belts, bearings, and seals, and, of course, bringing in busted hydraulic hoses! We had the hose stock and all of the various styles of replacement fittings, along with a press to crimp the fittings onto the hoses. I learned (mostly by watching) how to make the hoses, and after getting a hard time from all of the farmers, I got to be pretty good at the job. So much so that many of the old guys would ask for me to make their hoses. I considered that a high compliment... So now, forty-odd years later, I'm passing along the compliment: you have done a wonderful job on Christine, and I look forward to seeing you continue on her restoration, and watching you put her to work! Thanks for taking us along on the journey!
Thank you so much for the two part videos, it feels like Christmas morning! Brilliant content on Christine's journey and can't wait for more from Diesel Creek, genuinely a highlight every day a new one drops
Get rid of the galvanized coupling just before the filter bowl, it WILL eventually rust from the bare threads inside from any minor condensation that develops in the tank and head for the carb. Brass for fuel systems.
Matt, when you "re-do" your electrical wiring, move your primary feed tap in point AWAY from the battery terminal clamp and piggyback it onto the battery positive post at the starter relay (input post). This moves it away from a location where battery leakage and fumes might cause corrosion. Also, make sure you provide that primary tap with overcurrent protection in the form of a fusible link, a heavy primary Maxi fuse holder, or an appropriately sized main breaker. I don't know where you are joining the alternator output wire to the positive side of the electrical system right now, but wherever you do connect it make sure it is not at a point where the charging current will feed through the ignition switch. I have seen home made wiring jobs where the alternator output was fed into the system through the ignition switch and that will burn up the ignition switch and possibly even the wires if they are not sized for the maximum alternator output. And finally you need to utilize a small fuse panel to feed your gauge circuits, lights, heater fan and other small draw electric appliances.
Well Matt, don’t ever worry about making videos to long. You could make 2 hour videos because they’re always entertaining. Your channel are one of my favourites 😁
Matt, it's great to see the old girl running! I'm impressed by your determination dealing with so many different kinds of equipment and managing to get them all running.
Love the "King of the Hill" pipe bending time lapse. Perfect music for it. You are doing a great job on your videos. Love seeing you get back on these older projects, The "Celebrity" appearances are fun too. I am loyal subscribers to you, Chris and Mike for years.
This was quite emotional to watch especially at the end when Christine was doing her thing at the steam show . I feel so proud of you . It seems like the list of ’to dos ‘ are nothing compared to all the work you’ve done on her to get her to this stage . She looks and sounds so good . It was great watching those three guys just standing back in awe , being so impressed and letting you have your moment when she fired up . Well done Matt . I’ve really enjoyed watching you bring her back to her former glory . It doesn’t matter how long it has taken I think we’ve all loved being on the journey with you so it was great to see her first outing was at the steam show . Can you tell I’m slightly overwhelmed... not only with Christine but TWO videos over a weekend ! Get in ! X
What a great comment. My daughter pointed out your comment to me. I agree with her. The entire process, from start to finish, was a great story for all of us that found ourselves locked-down over the pandemic. Peace ☮💖🙏💙💛😷😎
@@kevinkipp3899 thank you Kevin . You’re right , it was great to watch his channel especially throughout the lockdown with his comical quips as he always proclaimed that he wasn’t an authority on things but yet I learned so much about how engines work . How many times were we all there willing his latest project to come alive after his call “Contact!” Living next to them must be a hoot although when he revives some of the more noisy engines you just hope they are either out at work or deaf . Still the funniest one was the snow mobile reveal when the garage door opened to a bright sunny day . Priceless simple humour . X
So happy to see this relic brought back to life. I know you keep saying it's not a perfect restoration, but that's probably better anyway. If it had been made completely perfect it would be hard to justify putting it to work again, this way you know you'll use it well lol
Matt, wish we were neighbors, as a Master Tech for class A trucks for 40 years now I also love repairing the old stuff. Just as a tip next time for flaring steel lines add a drop of oil on the tool head and the threads it will go much smother. For bending the line have a rag with some grease on it and give it a smear at the spot where you are bending the line. Thanks for your videos much enjoyed.
I forgot today was going to be part 2 and was mentally prepared to wait a whole week for the next vid. Pleasant surprise! Christine turned out awesome!
Love seeing the old grader back at it. Brings back good memories on the farm. Heck, I'm still finding grader blades in the trees all these years later. My dad used to tell me, "Never take advice from a grader operator. They're usually not on the level." haha.
Awesome job Matt, you've certainly brought Christine a long way. Am I the only person who was disappointed to see Christine's first run on another channel?
Matt, as a person who has watched this whole series, one hell of a job! i really cant wait to see her with all the glass back in. I'm glad to see someone saving all that old iron! thats our construction history
I’ve done a heap of that sort of pipework but still occasionally flare without the nut or bend it in the wrong direction, bloody good first effort Matt 👍🍻
Might want to check out the steering box and the UJ, there's a lot of movement in it. Great job getting her done and moving. Nice to see letsdig18 helping you out too with his verbal encouragement.
That steering UJ is pretty shot Matt I would replace it as a matter of urgency as it might do the same as one I had and "lock up" right in the middle of a vital manouver. Not Fun!
A little trick on something like bending tube to match an old line would have been to leave it long on both ends and start with the "middle" bend and work out from there. Then you can cut the ends to match the old line. Overall looks good.
Ive bent close to 80ish feet of stainless tubing per liquid hydrogen transport trailer at my place of work and ill tell ya this bit of information is what I've trained other on in the past and it had made the difference of sucess and failure in new hires. Definitely takes a different perspective to "seeing" it finished before the first bend is made.
You're ALMOST there! I'm about to start down the grader journey myself! Prolly won't go as far as you ended up going, but who knows! Glad to see you beat the old girl into submission!
I’m pretty sure you just assumed the gender of the grader and I’m not too sure how I feel about that, I’m considering calling you a bigot, let me think on it for a bit.
I've always been a firm believer in look after your stuff and it'll look after you. watching this series bringing ole Christine back to life has been hugely gratifying, you're methods make me chuckle but the end game is still the same.
Really, really neat. Brings back memories from when I was a child (a long time ago). I watched a Gallion grader of a similar configuration work and had a similar toy. Very nicely done. Thank you.
Another great video Matt, really appreciate the work you put into these! Oh, and as a guy who's been making a living from bending pipes and tubes for nearly 40 years, believe me when I say that you did a great job piping Christine up! Trust me, it gets easier 🙂👍
You've done a great job on "Christine". She's looking good. Engine sounds like it has a cylinder down and not just carb tuning. And check the lower universal joint on the steering shaft just before it goes into the front housing, it's looks a little worn out. Check the video at 44:01 to 46:19 you can clearly see the movement in the worn out joint.
Heck yeah! She's looking good. I'm glad to see an old machine like that put back into service instead of scrap. It's amazing that she's getting the love she deserves.
Having watched all these, I'm really pleased to see Christine has come this far. Perhaps a video on sorting out the remaining electrics next (lights, blower motor - although you will need to change the filter for that) as well as fitting the glass? A great job - well done!
Well add another piece to the Diesel Creek Equipment Resurrections! Man I love seeing old equipment come back to life and get to do what they was made for.
I started watching because of your church renovation series but then your machine overhauls kept me watching. It's nice that you make Series so that we can follow a project along I hope you find a new project that we can follow
My favorite and most anticipated series to date. When I was a kid we lived on a dirt/gravel road and my favorite memories were when the grader came and redid the road. He would cut from the ditch side back to the middle then flatten out the hump in the middle. Probably using this same vintage of machine. To me these were huge wonderful machines.
I know that proud feeling when a project is almost finished. that feels so good. you have a nice machine to work with. and you will certainly get the hang of it. great machine, and a top job.
After all the loving care Christine has received and all the time and effort you've put in on her behalf hopefully Christine has gotten over her urge to kill and will co-operate with you in future! She looks beautiful now and sounds pretty good too. Nice work Matt.
Matt, was great to finally meet you, Dirt Perfect and Lets Dig 18. Was shocked to walk up the line and see Christine sitting there, I knew it could be no other. You did a great job on it, and seat time will make you proficient also. was a great show.
I’m so proud of your efforts on that thing. Glad I waited to watch Chris’s video on this. Doesn’t it suck when things fail and there’s people there to bust your balls.
You know, the fact that you’re prepared to have a “go” at things you haven’t done before and acknowledge that you’re not sure, is one of the reasons I enjoy following. You don’t claim anything, other than the way it is. Great stuff.🇦🇺
You can find window molding through Year One or Classic Industries or LMC or other car renovation catalogs . I think but its worth a try. It would look freaking cool with the glass installed. Trophy winner for sure. Keep going on it. I hope you gently use it and not turn it into a work horse. Not many out there, take care of it.
Love that “air conditioned” cab on this grader. So sorry I didn’t make it to the show maybe next time. Congrats on all that work that surely made a star appearance there. Love your channel Restorations is what I do. Tuck Tellier
Matt, "patience is a virtue" and you have just come through with flying colours!!! Amazing to see Dirt Perfect and Lets Dig there to give you encouragement and support (and plenty of laughs!!) Loving this rebuild. Cheers from Scotland.
Brilliant seeing you guys altogether, love the way you provide Diesel Creek with moral support by as we say in the UK, taking the micky. Shows what good friends you all are.
hey Matt great work and congrats this one was one of my favorites. I spotted an preventative issue if you look back at the footage @ 44:37 the most inner hose is riding on top of the chassis leg and might rub through over time ,you might want to put an sacrificial saddle or sleeve on that part of the hose.
Appreciate every moment of this journey with you Matt. who'd have believed it would turn out that good, and a new set of skills acquired en route. Thanks so much and Well Done. :-)
I'm impressed with your making your grader like new (sort of). You do nice work on these beat up old machines. Great video. Great work. It'll be done when you say it's done. Again, great work.
Congrats for that a BIG and Splendid JOB. ""Christine"" is re-born. And now add grease and or oil every place where is a sliding. "Christine" will Thanks for that. Bon courage and stay safe.
It sure felt nice to just stand around and watch someone else work for a change! Glad shes ready to go back to work!
You did a great Job at it 🤣
@@DieselCreek I knew my place
Hopefully Matt sees your last grader video.
Chris , I’ve just watched your video on grading a road and I was touched by the fact that you let Matt enjoy that whole moment .
You stood back , all three of you and didn’t jump in and take over . It was nice to see Matt have a live audience . He can’t see or hear me and the rest of us laughing at his comments or shouting “ Yes! ” when watching his videos . So it was good to see the banter you all had .
Nice to see y’all doing collaborations u gained a new follower here bud. A fellow North Carolinian
Was awesome seeing the old girl come back alive great job on the restoration!!!
A friend of Matt’s is a friend of ours. New sub here👍
Looking forward to seeing more of your work and I’m a proud new follower
good job supervising . I like when you guys get together , things happen even if it's just a laugh
Hope he removes the Chinese rightng on his container anyone else? Ik he be busy but no flags just %&$# =/
Michelle, why are you always eating something and playing on your phone?!
Considering she had one wheel in the grave, and was destined to become a I beam or something like that.. this is amazing and now she can not only have a second chance of life but tell her story to future generations. Well done Matt !!! Something to be proud of
I really love this old girl. She looks just like the road graders shown in the books I read as a kid.
Christen reminded me of the times the state scrapped the dirt road we lived on in the early 50’ s
I just love seeing old equipment given a second chance at life👍
From my earliest days, I've felt a need to save and restore unusual, even oddball equipment. As time goes on, more and more people recognize the rarity and are drawn to it. Because it's been saved, it's there to be appreciated for perhaps generations. Besides, I'm not cheap, I'm frugal. Nice job, Matt. To watch it working again was a real pleasure.
It's fun to bring old back..
@@petero2693 It is. I did a journal entry this morning in Word Perfect on my Grid 1530. The OS is the last version of DOS. Some time this afternoon, I'll cut the grass on my Wheel Horse riding mower that was built during the Nixon administration. On the other hand, this laptop is a late model Lenovo machine running Linux. The old and capable survive alongside the new. I think that is as it should be.
One of my favorite restorations on RUclips! This part reminded me of when I was a teenager working in an auto parts store in Fairhope, AL... many of our customers were local farmers, and they were always coming in looking for belts, bearings, and seals, and, of course, bringing in busted hydraulic hoses! We had the hose stock and all of the various styles of replacement fittings, along with a press to crimp the fittings onto the hoses. I learned (mostly by watching) how to make the hoses, and after getting a hard time from all of the farmers, I got to be pretty good at the job. So much so that many of the old guys would ask for me to make their hoses. I considered that a high compliment... So now, forty-odd years later, I'm passing along the compliment: you have done a wonderful job on Christine, and I look forward to seeing you continue on her restoration, and watching you put her to work! Thanks for taking us along on the journey!
A scarifier is the front ripper thanks for good memories. Good luck.
Thing of BEAUTY!
Thank you so much for the two part videos, it feels like Christmas morning! Brilliant content on Christine's journey and can't wait for more from Diesel Creek, genuinely a highlight every day a new one drops
Glad you like them!
Been waiting all day for 2nd part thanks mate ✌️❤️ from 🇬🇧
Also Good to see Chris and Mike
Exactly.
Get rid of the galvanized coupling just before the filter bowl, it WILL eventually rust from the bare threads inside from any minor condensation that develops in the tank and head for the carb. Brass for fuel systems.
Matt, when you "re-do" your electrical wiring, move your primary feed tap in point AWAY from the battery terminal clamp and piggyback it onto the battery positive post at the starter relay (input post). This moves it away from a location where battery leakage and fumes might cause corrosion. Also, make sure you provide that primary tap with overcurrent protection in the form of a fusible link, a heavy primary Maxi fuse holder, or an appropriately sized main breaker. I don't know where you are joining the alternator output wire to the positive side of the electrical system right now, but wherever you do connect it make sure it is not at a point where the charging current will feed through the ignition switch. I have seen home made wiring jobs where the alternator output was fed into the system through the ignition switch and that will burn up the ignition switch and possibly even the wires if they are not sized for the maximum alternator output.
And finally you need to utilize a small fuse panel to feed your gauge circuits, lights, heater fan and other small draw electric appliances.
I was going to make the same comment about a fuse or circuit breaker.
@@ChrisACiufo ditto
Wow, you have everyone there dirt perfect and let’s dig 18
Perfect restoration Matt. I like your work amazing mechanic
I'm Happy for you Matt, you did a great job getting "Christine" Back to usable. Looks great! Thanks for taking the time to include us.
My pleasure!
@@DieselCreek wonder if the starter needs to be rebuilt
Well Matt, don’t ever worry about making videos to long. You could make 2 hour videos because they’re always entertaining. Your channel are one of my favourites 😁
Matt, it's great to see the old girl running! I'm impressed by your determination dealing with so many different kinds of equipment and managing to get them all running.
Tube bending hint: first make those bends, then cut it to the right lenght marking those cutting spots with original pipe👍
thank you for that, it is my birthday,yah thank you for that.
"Well, here's the tubing before I ruin it!" LMAO LMAO LMAO (You kill me)
Love the "King of the Hill" pipe bending time lapse. Perfect music for it. You are doing a great job on your videos. Love seeing you get back on these older projects, The "Celebrity" appearances are fun too. I am loyal subscribers to you, Chris and Mike for years.
Glad I’m not the only one to catch that 😂
Came here for this 😂
@@BushBoy_7567
This was quite emotional to watch especially at the end when Christine was doing her thing at the steam show . I feel so proud of you .
It seems like the list of ’to dos ‘ are nothing compared to all the work you’ve done on her to get her to this stage .
She looks and sounds so good . It was great watching those three guys just standing back in awe , being so impressed and letting you have your moment when she fired up .
Well done Matt . I’ve really enjoyed watching you bring her back to her former glory . It doesn’t matter how long it has taken I think we’ve all loved being on the journey with you so it was great to see her first outing was at the steam show .
Can you tell I’m slightly overwhelmed... not only with Christine but TWO videos over a weekend ! Get in ! X
What a great comment. My daughter pointed out your comment to me. I agree with her. The entire process, from start to finish, was a great story for all of us that found ourselves locked-down over the pandemic.
Peace ☮💖🙏💙💛😷😎
@@kevinkipp3899 thank you Kevin . You’re right , it was great to watch his channel especially throughout the lockdown with his comical quips as he always proclaimed that he wasn’t an authority on things but yet I learned so much about how engines work .
How many times were we all there willing his latest project to come alive after his call “Contact!”
Living next to them must be a hoot although when he revives some of the more noisy engines you just hope they are either out at work or deaf . Still the funniest one was the snow mobile reveal when the garage door opened to a bright sunny day . Priceless simple humour . X
Are you his grandma?
@@geesss8675 cheeky ….Do I look like a grandma ?
I absolutely love the whole series of Christine. Awesome awesome awesome.
Nice to see her working after all those years.
So happy to see this relic brought back to life. I know you keep saying it's not a perfect restoration, but that's probably better anyway. If it had been made completely perfect it would be hard to justify putting it to work again, this way you know you'll use it well lol
Dam she turned out awesome !!! My favorite part about this rig , is that you can haul it with a pickup truck ! Thats super practical
You got that right! That was the whole reason I bought it!!
Back to back DC videos. Best holiday gift of all.
bit by bit Christine the Galion Grader gets a new life!
All them New Shoes Look good on old Christian there Matt 31:30 @Diesel Creek
Matt, wish we were neighbors, as a Master Tech for class A trucks for 40 years now I also love repairing the old stuff. Just as a tip next time for flaring steel lines add a drop of oil on the tool head and the threads it will go much smother. For bending the line have a rag with some grease on it and give it a smear at the spot where you are bending the line. Thanks for your videos much enjoyed.
I forgot today was going to be part 2 and was mentally prepared to wait a whole week for the next vid. Pleasant surprise! Christine turned out awesome!
Love seeing the old grader back at it. Brings back good memories on the farm. Heck, I'm still finding grader blades in the trees all these years later. My dad used to tell me, "Never take advice from a grader operator. They're usually not on the level." haha.
It never fails that when everybody is watching...
Awesome job Matt, you've certainly brought Christine a long way. Am I the only person who was disappointed to see Christine's first run on another channel?
Matt, as a person who has watched this whole series, one hell of a job! i really cant wait to see her with all the glass back in. I'm glad to see someone saving all that old iron! thats our construction history
I’ve done a heap of that sort of pipework but still occasionally flare without the nut or bend it in the wrong direction, bloody good first effort Matt 👍🍻
I did that a few times!!!
I am pretty sure that if someone says they don't screw up like that, they are a liar.
Christine turned out great! She’s an old beast!
Gotta love a new old machine getting back to service
I love the look before everything even the woods look bland and dead and after everything looks vibrant and alive
Might want to check out the steering box and the UJ, there's a lot of movement in it.
Great job getting her done and moving. Nice to see letsdig18 helping you out too with his verbal encouragement.
I noticed the steering rod coupling seemed pretty sloppy also.
That steering UJ is pretty shot Matt I would replace it as a matter of urgency as it might do the same as one I had and "lock up" right in the middle of a vital manouver. Not Fun!
Coffee, holiday weekend, Diesel Creek Videos, the love of my wife and family…it don’t get no better than this! Thanks Matt and Miss Eva.
42 years working as a fleet tech for a municipality , I still learn new stuff when watching your videos.
To all those who serve or served and to the families whose sons and daughters gave their lives for our freedom ……….THANK YOU 🇺🇸!!! Lest we forget…..
Perhaps Christine has finally mellowed and decided not to kill anyone near her!
She is looking great!
Thanks for sharing 🇨🇦
That old grader looks amazing, great job
Thank you!
A little trick on something like bending tube to match an old line would have been to leave it long on both ends and start with the "middle" bend and work out from there. Then you can cut the ends to match the old line. Overall looks good.
I am so going to use your 'trick' next time I have to bend some tubing!
Ive bent close to 80ish feet of stainless tubing per liquid hydrogen transport trailer at my place of work and ill tell ya this bit of information is what I've trained other on in the past and it had made the difference of sucess and failure in new hires. Definitely takes a different perspective to "seeing" it finished before the first bend is made.
Been following a long with the Christine Restoration, great to see her working again.
Love how this video is 90% the same as part 1
Congratulation on 3/4 way restoration and a first show with Christine. Tell you what she is a fighter.
Congrats you persisted and did a great job, despite all the setbacks and now it’s preserved for another 50 years 👍
I’m so glad I’ve been along on this journey! Thanks for sharing with us!!
You are so welcome!
You're ALMOST there! I'm about to start down the grader journey myself! Prolly won't go as far as you ended up going, but who knows! Glad to see you beat the old girl into submission!
It’s been a journey and a learning experience for both of us! 🤣
Ahhh is that one of the other machines with Big bad John
I’m pretty sure you just assumed the gender of the grader and I’m not too sure how I feel about that, I’m considering calling you a bigot, let me think on it for a bit.
@@2491kridge After she tried to kill him someone (in the comments) suggested "Christine" from a Stephen King novel. Don't ask me which one
@@MrPossumeyes think the movie is called , carrie.
Finally! We witnessed Christine running around! Great resuscitation!
That puppy looks brand new. Well done.
I've always been a firm believer in look after your stuff and it'll look after you. watching this series bringing ole Christine back to life has been hugely gratifying, you're methods make me chuckle but the end game is still the same.
I remember the day your picked this up I honestly have to say it was an amazing job done Matt!!
Really, really neat. Brings back memories from when I was a child (a long time ago). I watched a Gallion grader of a similar configuration work and had a similar toy. Very nicely done. Thank you.
Been a long time coming to see this Ole girl working again. Hope you get all of the gremlins out of her.
The smile on your face when it finally started is precious.
Another great video Matt, really appreciate the work you put into these! Oh, and as a guy who's been making a living from bending pipes and tubes for nearly 40 years, believe me when I say that you did a great job piping Christine up! Trust me, it gets easier 🙂👍
Holy Crap! He said Stainless!
He is now my hero.
MATT, I'm impressed with the fortitude and determination you have to bring back 'Christine' to a 'Cinderella' story ! Great stuff!!
I've been waiting all weekend for part 2 - thanks ! Great to see Christine running
Hope you enjoyed it!
Christine will always demand your attention Matt, you just need to understand her position in your life. Awesome job btw. 😊
Beautiful work. I also appreciate the King Of The Hill nod with that time lapse music.
You've done a great job on "Christine". She's looking good. Engine sounds like it has a cylinder down and not just carb tuning. And check the lower universal joint on the steering shaft just before it goes into the front housing, it's looks a little worn out. Check the video at 44:01 to 46:19 you can clearly see the movement in the worn out joint.
Yup i noticed it as well.
I agree about the cylinder being down. And yeah that ujoint has got a bit of slop in her 😂
Definitely not hitting on all cylinders…
yer just a bit of slop in it lol
Ware is normally a think with these graders
Heck yeah! She's looking good. I'm glad to see an old machine like that put back into service instead of scrap. It's amazing that she's getting the love she deserves.
Having watched all these, I'm really pleased to see Christine has come this far. Perhaps a video on sorting out the remaining electrics next (lights, blower motor - although you will need to change the filter for that) as well as fitting the glass? A great job - well done!
Well add another piece to the Diesel Creek Equipment Resurrections! Man I love seeing old equipment come back to life and get to do what they was made for.
Love her name. Christine. I bet she is happy to be useful again. ❤❤❤
Thanks for sharing the journey with us Matt.
it’s had its ups and downs but glad to see Christine has come good.
I started watching because of your church renovation series but then your machine overhauls kept me watching. It's nice that you make Series so that we can follow a project along I hope you find a new project that we can follow
Christine has come so far! Great job with the old beast!
Great job Matt getting Christen doing what’s supposed to do
It is really good to see the old girl back to work. good job sir.
My favorite and most anticipated series to date. When I was a kid we lived on a dirt/gravel road and my favorite memories were when the grader came and redid the road. He would cut from the ditch side back to the middle then flatten out the hump in the middle. Probably using this same vintage of machine. To me these were huge wonderful machines.
I know that proud feeling when a project is almost finished. that feels so good. you have a nice machine to work with. and you will certainly get the hang of it. great machine, and a top job.
What a great series. Good job Matt!
The perfect place to christen Christine!
After all the loving care Christine has received and all the time and effort you've put in on her behalf hopefully Christine has gotten over her urge to kill and will co-operate with you in future! She looks beautiful now and sounds pretty good too. Nice work Matt.
Matt, was great to finally meet you, Dirt Perfect and Lets Dig 18. Was shocked to walk up the line and see Christine sitting there, I knew it could be no other. You did a great job on it, and seat time will make you proficient also. was a great show.
I’m so proud of your efforts on that thing. Glad I waited to watch Chris’s video on this. Doesn’t it suck when things fail and there’s people there to bust your balls.
You know, the fact that you’re prepared to have a “go” at things you haven’t done before and acknowledge that you’re not sure, is one of the reasons I enjoy following.
You don’t claim anything, other than the way it is. Great stuff.🇦🇺
Great to see Xhrusteen off of the DA list and back to work.
I love how the RUclips subtitles says "[Music]" whenever the motor is running.
You can find window molding through Year One or Classic Industries or LMC or other car renovation catalogs . I think but its worth a try. It would look freaking cool with the glass installed. Trophy winner for sure. Keep going on it. I hope you gently use it and not turn it into a work horse. Not many out there, take care of it.
Love that “air conditioned” cab on this grader. So sorry I didn’t make it to the show maybe next time. Congrats on all that work that surely made a star appearance there. Love your channel Restorations is what I do. Tuck Tellier
Matt, "patience is a virtue" and you have just come through with flying colours!!! Amazing to see Dirt Perfect and Lets Dig there to give you encouragement and support (and plenty of laughs!!) Loving this rebuild. Cheers from Scotland.
Those stainless steel pipes look way better bare than if they were painted yellow!
She's a beaut'!
I came aboard your channel when you were digging Christine out of the tree roots, I have enjoyed every episode!
Brilliant seeing you guys altogether, love the way you provide Diesel Creek with moral support by as we say in the UK, taking the micky. Shows what good friends you all are.
Job well done as usual
Nothing better than a perfect team
Thank you All
I appreciate it
That’s been an awesome series.Hope we are going to see some of the shovel as well.Thanks for putting the effort in and sharing them with us 🤙💯👀
hey Matt great work and congrats this one was one of my favorites. I spotted an preventative issue if you look back at the footage @ 44:37 the most inner hose is riding on top of the chassis leg and might rub through over time ,you might want to put an sacrificial saddle or sleeve on that part of the hose.
I love the time lapse music. Almost sounds like im watching hank hill drinking beer with his neighbors...
Matt, originally from economy boro, love working on that kind of old equipment, you can be proud of what you have accomplished.
Appreciate every moment of this journey with you Matt. who'd have believed it would turn out that good, and a new set of skills acquired en route. Thanks so much and Well Done. :-)
I'm impressed with your making your grader like new (sort of). You do nice work on these beat up old machines. Great video. Great work. It'll be done when you say it's done. Again, great work.
Great job ! Keep pounding out those projects
Love watching ol, Christine working.awsome job little grader looks and runs great 👍
Congrats for that a BIG and Splendid JOB. ""Christine"" is re-born.
And now add grease and or oil every place where is a sliding. "Christine" will Thanks for that.
Bon courage and stay safe.