life savior. dude you don't know how much this helped me. you give every details possible. Ordered all the pieces by item numbers and it got delivered today. it only took me 10min to set it for the first time then I removed everything and started over and only took me 5min. Thanx. you get sub.
Mr. MeVsMe Each Nato Handle comes with one that you will not need. You will use one of those. He did a great job on this video but probably should update his description and add that little tidbit since he skipped that part of the installation in the video. Took me 3/4 of the way through the build to figure that one out as well.
Thanks for video. It’s a great setup. I did have the issue where the arm was hitting the grip clamps at first, even after removing the washers. So I found a fix that worked for me and hopefully it can help solve it for others. I have a Neewer shoulder mount that was laying around. I removed the grip clamps on it, and swapped them out with the Small Rig ones. They are blue, which doesn’t bother me, but the arm now more than clears those clamps without removing the washers on the Neewer clamps. I removed 1 of the washers on it just for a bit more clearance. Hopefully that helps.
Thanks for making this video. Beginning videographer here trying to figure out the best setup with a mirrorless as it's all I have for my camera budget. Definitely helped me. Subbed
Hi Ross - thanks for this great informative video and walk through. Unfortunately the "15mm Rail Bridge 1522" is discontinued from SmallRig. What would be a suitable substitute for the combo? Kind regards Jacob
Does anyone know the name of the "extra piece" that was supposed to be included with other items? Unfortunately mine was not included so I have to buy it separately.
Hello Mate, nice video just a quick question for you does your monitor works when you plug in the mcc cable to both camera and ronin? When I do so my monitor just turns black and as soon as I plug it off it turns back on. Which means I can not access my focus wheel and I have my monitor setup which is really annoying. Did you have the same pb?
@The Brotographer How did you solve this? As soon as I plug my mcc-c or mcc-b then my hdmi output turns black while in movie mode. I've heard that you can buy another mcc-multi cable instead but then you can only control zoom instead of focus but the hdmi output should work... Any other solution for this?
i have almost the same setup but instead of mounting the monitor on the bottom i attached a cold shoe mount to the 1/4 threads on the on the next and mounted the monitor there so i wouldn't have to look soo low and it still gives me access to the gimbal controls or you can mount a nato rail on the neck also if u prefer to
Hi Thanks for the video setup! I got the same however please reply to a slight problem which is the two handles on the top.....the locking turns on the top are rubbing against the gimble when turning left to right? please tell me if your experiencing this problem and a work around!! Thanks Again...
How are you keeping the base arm of the Ronin S from hitting the quick releases on the handles? If I sit the Ronin on a table with it's tripod and then try to do a simple 360 pan the arm hits the quick release tightening levers. I've tried putting the collar on upside down. Does yours hit, does it affect your work? I should add, I HAVE removed the washers. I've also tapped the collar down as far as possible onto the Ronin's neck. No luck.
I bought all the items you had recommended for the dual gripm for Ronin S. Unfortunately, after installing the dual grip, ronin S is NOT able to PAN around as the locking nut is in the way. You should include this part in your video as well
Could you also undo the 4 screws holding the handle and remount on the other side of the plate. Then reattach to the nato rail with the adjustment screws on the bottom rather than on top?
I too am missing the rail that the monitor clamp mounts on. Yes I have everything you listed including the handles but part is still missing.... What is that part number? It’s not listed in your description. I went ahead and already purchased a NATO rail (SmallRig Nato Rail BUN2501), but it was the wrong part. Don't want to waste anymore money on wrong parts, so your help is greatly appreciated.
Hola. Gran video.Tengo una duda si montas en atomos ninja V con el dji ronin, se puede grabar conectando el ronin por usb a la sony a7III he conectado y en cuanto conecto el dji a la cámara para utilizar el botón de rec del ronin s por la pantalla de ronin se pone totalmente negra.
I really like the feel of this setup but I don't get enough clearance for the gimbal to move freely with the nato handle knobs. You can actually see how close they are to the gimbal arms in your video at 23 seconds in. I think I need to machine the knobs down so I can get clearance.
For smallHD focus users: You can skip on the nato rail and monitor mount, instead of that just use a coldshoe adapter on the railbridge and use the standard shivel mount :)
Just got the small rig mounting plate with the handles, but for some reason when I tighten the plate to ronin s, there is wiggle and is not fully secured... any ideas on why this might be happening,..? the part doesn't seem faulty.
I have only one question. The Smallrig 2221 base plate which you put around the ronin always slide up and that already in 5 minutes. how did you fix this? because I tighten the screws really hard and that doesn't help. I don't see anyone with this problem and I think that's weird. I'm afraid if I use the ronin longer, it will come off completely
That's a great alternative to the classic dual handle Ronin M like style. I have a question for you: with your setup are you able to attach a Tilta Nucleus N? Since the two handle are very close to the body it should make it easier to focus and hold the handle in the same time with the left hand but it seems also too close to fit it. Have you ever tried? Thanks!
Great video man. I was trying to look at the clamp attachment for the zhiyun crane 2 and unfortunately there’s no NATO rails on that version. Know of a way to get a small form factor buildout like this for the crane 2? It’s just the clamp that’s different so I’m guessing that it’s gonna take a few more parts.
Hi, I followed your setup but how did you get the ronin s and monitor both connected to the camera and works? I connected them both my monitor go blank. Once I unplug the ronin s cable the monitor works again. Thanks
Will you do an updated video and let us know if this setup can be easily transferable to the RS2? I want to upgrade but wondering can I use this setup for the RS2?
Hello again. I found a solution at least for my situation. I have a Neewer shoulder mount that was laying around. I removed the blue handle clamps on it and swapped them out from the Small Rig ones. They are a bit shorter and the arm more than cleared the clamps. I removed one of the washers on the Neewer clamp for a bit more clearance, but I didn’t need to. Hopefully that helps.
Hi, could you help please, I just tried your Smallrig set up but the 2084 handles' locking nuts are too big and get in the way of the Ronin's rotation. Any answers or do I send everything back?
Bought the 2221 mount and the 2084 handles from Small Rig. Noticed that the panning motion is obstructed by the small knobs that tighten the handles to the mount. Can the handles be mounted on the opposite side of the bracket it's attached to, and the handle mount flipped upside down to be able to 360* pan without obstruction?
Hey man! nice tips! Two questions, Will this setup work with the Small HD focus 5? And with that monitor setup, does it bother you if you have to use the joystick? Thanks in advance!
I may have missed it, or Small rig messed up my order but. I didn’t get a NATO rail for the monitor holder. Was that not in the list or was it supposed to come with the monitor holder?
I attached the 2005 handle (believe it's the same as the 2084 with that number indicating that it just comes with the rail) and notice that the gimbal arm clears the screw so closely that you can't even see the clearance in between. Doesn't seem to be an issue but is yours that close and never had an issue?
Are thumbscrews on the 2 upper NATO handles going to prevent the gimble from doing the 180 that it does when the trigger is pulled for pointing to the user?
You didn't give the part number for the Nato rail that goes with the monitor clamp. You said it was something extra? At 2:30 you say don't worry about this part right now?
Hey Bro, ordered these from Amazon in Australia but when I just fitted them the lower arm on the gimbal that swings around hits the screw tabs on the top of the nato mounts on the handle!!! Am I the only one with this problem? ADVICE PLEASE
2:32 you said not to worry about that piece, but it seems to be an important piece my guy. I purchased everything except for the nato handles and the clamp. Does it come with one of those purchases?
I just gt a nato rail long one screw at the collar where above the thumb stick and mount the ninja S below. this way u can save all the other parts and cut some weight
Do the AF features change with the smallhd monitors? Or is it the same since it's still HDMI out? Also, any tips on cable management? Looking for a neat solution. Thx!
Yeah unless you’re only recording externally, the face tracking in 4K won’t work on any monitor unfortunately. I don’t have an elegant solution for the cable, I just route it through the SmallRig plate.
Hey so I got mine all set up! Did you notice that it racks the axis arm on the handle screws? Is there a way to prevent that from happening? It seems like the screws are too high and get in the way.
Has anyone tried this on the Ronin-SC? It seems only part 2221 (SmallRig Mounting Clamp for DJI Ronin S Gimbal) must be replaced with BSS2412 (SmallRig Mounting Clamp for DJI Ronin-SC Gimbal). However, from comments above this part does not do the job. Apparently there is an alternative... ANY IDEA WHICH PART?
Bought all the pieces for just the Monitor Setup, and I am missing the piece that ''you say to not worry about since it is included in another item you purchase'' Please help
So I got this setup and it’s great but if you try using the joystick to pan the camera left or right the lower arm hits the fasteners on the handle grips. The same thing happens when you try ‘selfie mode’ or in flashlight mode try doing a 360° shot. I’m a little disappointed. If the handle grips were further out...problem solved. I tried disassembling and flipping and grips upside down so that the fastener was on the bottom, but the handles aren’t build for that. Bummer. Still a nice setup. Maybe someone has a solution. Thanks!
Hi, can I use this SMALLRIG Dual Rod Clamp Rail Block for 15mm Rod DSLR Rig and Support System - 1806? The one you mention SmallRig 15mm Rail Bridge 1522 it’s out stock for the moment.
@@jdillard36 Yes, I do have that piece. The problem is the tightening knob on the top of the handles. When the gimbal pans left or right the panning arm hits the tightening knobs on both sides. Granted, the gimbal has to turn ninety degrees before it hits, but still not ideal. I am sure I messed something up but not sure what. Thanks for the reply.
@@mklein345 where did you get that specific piece from? Or what did it come with? I ordered everything, but i dont have that piece and i dont know the name of it.
can you DM what kind of letter or proposal you send this companies to get you to send you free stuff to review? Ive been trying to get Sailing products to review but no luck.
PROBLEM with this setup..Hey buddy.. thanks for this.. i did the same thing, but the screw knobs on top the nato handles rub against ronin s , making it impossible for it rotate around..
@@TheBrotographer Came here looking for an answer about not being able to go into "selfie" mode with this setup (which I also bought). Didn't read the description to learn about the washer removal. Thanks!
@@TheBrotographer I'm running with a Rode VideoMicPro+ Can't operate the Gimbal in underslung mode. Might need to look at options. Cheers for the reply. What's the music on the vid btw? Make.Art.Now has it on one of his vids.
extremely easy to listen to no annoying music in the back ground just the facts ....... make more of these please
Thanks! Absolutely.
life savior. dude you don't know how much this helped me. you give every details possible. Ordered all the pieces by item numbers and it got delivered today. it only took me 10min to set it for the first time then I removed everything and started over and only took me 5min. Thanx. you get sub.
Bruh where did you get the extra piece at 2:32 from that he says not to worry about
Mr. MeVsMe Each Nato Handle comes with one that you will not need. You will use one of those. He did a great job on this video but probably should update his description and add that little tidbit since he skipped that part of the installation in the video. Took me 3/4 of the way through the build to figure that one out as well.
Just got mine, been a videographer for 10+ years and couldn’t be more impressed, my cable management as well was a bonus sooo thank you for this 🖤🖤
dude... I'm so glad I came across your video... this is exactly what I need... love it...
Glad you found the video! How did you stumble upon it?
after about 5 searches and videos it poped up in my recommended...
I got all the things through your links in the description. Thanks a mil for posting this :D!
Thanks for using the links!
Thanks for video. It’s a great setup. I did have the issue where the arm was hitting the grip clamps at first, even after removing the washers. So I found a fix that worked for me and hopefully it can help solve it for others. I have a Neewer shoulder mount that was laying around. I removed the grip clamps on it, and swapped them out with the Small Rig ones. They are blue, which doesn’t bother me, but the arm now more than clears those clamps without removing the washers on the Neewer clamps. I removed 1 of the washers on it just for a bit more clearance. Hopefully that helps.
That’s a great option!
nice, great quality, clean presenting, too the point but not too fast. And shouts to all the sources and honesty love it. Subbed
Thanks for making this video. Beginning videographer here trying to figure out the best setup with a mirrorless as it's all I have for my camera budget. Definitely helped me. Subbed
Thanks for the sub!
Nice set up. I prefer the wide bars, so I can invert the whole thing and it becomes a Ronin M/MX. Versatility is for me.
Bo Zire couldn’t you do this with a narrow grip like on the video?
thats a badass setup.
Good tips for pro filmakers really enjoyed the video 😁
Thanks for watching!
Hi Ross - thanks for this great informative video and walk through.
Unfortunately the "15mm Rail Bridge 1522" is discontinued from SmallRig. What would be a suitable substitute for the combo?
Kind regards Jacob
Thats what I was wondering too... Did you ever find an alternative?
@@CliffFennell Hi ... no sorry ... I never got the set up finalised :-/
Great video, thanks! Just purchased all of these :)
Does anyone know the name of the "extra piece" that was supposed to be included with other items? Unfortunately mine was not included so I have to buy it separately.
Did you ever find out what it was?
most efficient setup i've seen by far
Thanks!
Hello Mate, nice video just a quick question for you does your monitor works when you plug in the mcc cable to both camera and ronin? When I do so my monitor just turns black and as soon as I plug it off it turns back on. Which means I can not access my focus wheel and I have my monitor setup which is really annoying. Did you have the same pb?
Any solution?
@The Brotographer How did you solve this? As soon as I plug my mcc-c or mcc-b then my hdmi output turns black while in movie mode. I've heard that you can buy another mcc-multi cable instead but then you can only control zoom instead of focus but the hdmi output should work... Any other solution for this?
i have almost the same setup but instead of mounting the monitor on the bottom i attached a cold shoe mount to the 1/4 threads on the on the next and mounted the monitor there so i wouldn't have to look soo low and it still gives me access to the gimbal controls or you can mount a nato rail on the neck also if u prefer to
Visions Of Vasquez you have a picture of yours somewhere where I could see it man?
this is the best setup ever Thanks man i love it
Awesome! Glad you like it.
Hi Thanks for the video setup! I got the same however please reply to a slight problem which is the two handles on the top.....the locking turns on the top are rubbing against the gimble when turning left to right? please tell me if your experiencing this problem and a work around!! Thanks Again...
Hey you just have to remove the little washers on the screw and you’re good to go.
@@TheBrotographer I removed the washer and it worked but after using it for a few the gimbal begins to rub the locking screw again...
Why don't you refit the handle to other side of the main plate, and having the nato screws on the underside rather than on top?
u can put a nato rail on the 3 wholes facing you so u can mount a monitor closer up above the joystick so u won't have to look so far down
At 4:06 you attach it to the bottom with the metal, does it come with that, or do I have to buy that separately
Each handle comes with one of these pieces. 👍🏻
@theBrotographer Great video. But what cable (make/model) do you use to run from the camera to the Ninja? Thanks.
The Amazon link for the Ninja V is very, very broken haha! I don't need a Ab Muscle Toner, thanks, though lol =D
How are you keeping the base arm of the Ronin S from hitting the quick releases on the handles? If I sit the Ronin on a table with it's tripod and then try to do a simple 360 pan the arm hits the quick release tightening levers. I've tried putting the collar on upside down. Does yours hit, does it affect your work? I should add, I HAVE removed the washers. I've also tapped the collar down as far as possible onto the Ronin's neck. No luck.
You need to take the little washers out of the screws on the handles and it will clear it just fine.
I bought all the items you had recommended for the dual gripm for Ronin S. Unfortunately, after installing the dual grip, ronin S is NOT able to PAN around as the locking nut is in the way. You should include this part in your video as well
EXACTLY!!!!! Same here.....
All you need to do is remove the small washer underneath the locking nut.
All you need to do is remove the small washer underneath the locking nut.
Could you also undo the 4 screws holding the handle and remount on the other side of the plate. Then reattach to the nato rail with the adjustment screws on the bottom rather than on top?
I too am missing the rail that the monitor clamp mounts on. Yes I have everything you listed including the handles but part is still missing.... What is that part number? It’s not listed in your description. I went ahead and already purchased a NATO rail (SmallRig Nato Rail BUN2501), but it was the wrong part. Don't want to waste anymore money on wrong parts, so your help is greatly appreciated.
Does that face detect feature mentioned work with the Ninja if you have Canon R5 or just Sony?
The setup is alright but mine is better.
I'm not a fan of those nato-rail handles. It takes too long to attach them to the clamp.
Hola. Gran video.Tengo una duda si montas en atomos ninja V con el dji ronin, se puede grabar conectando el ronin por usb a la sony a7III he conectado y en cuanto conecto el dji a la cámara para utilizar el botón de rec del ronin s por la pantalla de ronin se pone totalmente negra.
Oh man, looks like the 1522 Rail Bridge is no longer on the market. Any alternatives?
Bummer! Any 15 mm rail bridge will really work.
nice video brother!
Thanks man!
How did you attach the quick release to the top of the rail bridge? For some reason the screws that came in don’t stay secure
It’s with the NATO rail.
What cables (e.g. HDMI) do you use for you Atomos?
This one: amzn.to/2wKzRiL
does the bottom of the ronin hit the screw part on the handle for you. for me it does? what’s your workaround.
Check out the description. You have to remove the washers from those screws.
I really like the feel of this setup but I don't get enough clearance for the gimbal to move freely with the nato handle knobs. You can actually see how close they are to the gimbal arms in your video at 23 seconds in. I think I need to machine the knobs down so I can get clearance.
You just need to remove the washers.
Great video, well thought out..life saver. Thanks.
Have you purchased it yet?
For smallHD focus users: You can skip on the nato rail and monitor mount, instead of that just use a coldshoe adapter on the railbridge and use the standard shivel mount :)
Nothing in this video really makes sense. You can do a much better setup for half the price.
Just got the small rig mounting plate with the handles, but for some reason when I tighten the plate to ronin s, there is wiggle and is not fully secured... any ideas on why this might be happening,..? the part doesn't seem faulty.
I have only one question. The Smallrig 2221 base plate which you put around the ronin always slide up and that already in 5 minutes. how did you fix this? because I tighten the screws really hard and that doesn't help. I don't see anyone with this problem and I think that's weird. I'm afraid if I use the ronin longer, it will come off completely
Weird that B&H doesn't carry the 1674 base plate
Yeah it is strange.
good shit man thank you
Nice setup!
Thanks man!
At 6:17 it is obvious that this handels blocking pan axis arm, so you will get really limited movements...
Check out the description. There’s an easy fix.
@@TheBrotographer Oh, sorry missed that out, thanks a lot, saved my day )
Love the set up was getting ready to purchase these parts but I have the rs 2. Will the parts still be the same ?
That's a great alternative to the classic dual handle Ronin M like style. I have a question for you: with your setup are you able to attach a Tilta Nucleus N? Since the two handle are very close to the body it should make it easier to focus and hold the handle in the same time with the left hand but it seems also too close to fit it. Have you ever tried? Thanks!
Hello.
nice vid
that setup is better than Switch dji Grip Dual Handle?No monitor mount handles
Great video. Thanks for the tips.
Absolutely!
Great video man. I was trying to look at the clamp attachment for the zhiyun crane 2 and unfortunately there’s no NATO rails on that version.
Know of a way to get a small form factor buildout like this for the crane 2? It’s just the clamp that’s different so I’m guessing that it’s gonna take a few more parts.
Hi, I followed your setup but how did you get the ronin s and monitor both connected to the camera and works? I connected them both my monitor go blank. Once I unplug the ronin s cable the monitor works again. Thanks
I got the same handles but the top part of the tightening knobs touch the bottom rail of the Ronin when it turns. Does yours do this too?
You need to remove the washers.
Will you do an updated video and let us know if this setup can be easily transferable to the RS2? I want to upgrade but wondering can I use this setup for the RS2?
I removed the two washers on the grips but my arm is still hitting those clamps. Anybody have a solution?
me too!
How’s it going? I’m running into the same issue. Did you ever find a solution for the arm hitting the clamps? Thanks
Hello again. I found a solution at least for my situation. I have a Neewer shoulder mount that was laying around. I removed the blue handle clamps on it and swapped them out from the Small Rig ones. They are a bit shorter and the arm more than cleared the clamps. I removed one of the washers on the Neewer clamp for a bit more clearance, but I didn’t need to. Hopefully that helps.
Hi, could you help please, I just tried your Smallrig set up but the 2084 handles' locking nuts are too big and get in the way of the Ronin's rotation. Any answers or do I send everything back?
All you need to do is remove the washers.
@UCx-anfONj02GUVohXYAQUcw Sorry I don't see any washers.
There are washers inside the handle screws. Take those out.
@@TheBrotographer thank you! Was looking for that same answer
Awesome!
Bought the 2221 mount and the 2084 handles from Small Rig. Noticed that the panning motion is obstructed by the small knobs that tighten the handles to the mount. Can the handles be mounted on the opposite side of the bracket it's attached to, and the handle mount flipped upside down to be able to 360* pan without obstruction?
No you need to remove the baby washers from the handle screw.
Hey man! nice tips! Two questions, Will this setup work with the Small HD focus 5? And with that monitor setup, does it bother you if you have to use the joystick?
Thanks in advance!
It works fine mate - I did the same thing :-)
It’ll work just fine.
Great video and fantastic setup. I would like to know if this will work with the Ronin SC?
How's it going? Did you ever find out if this setup works with the Ronin SC? I was wondering the same. Thanks
I want know too! With smallrig 2412
@@samyrnovelli me too!
@@horror_2s I'd assume it works just fine.
Aïe aïe aïe prices are no longer the same 🤧 but thanks for the inspiration 🙏🏻
I may have missed it, or Small rig messed up my order but. I didn’t get a NATO rail for the monitor holder. Was that not in the list or was it supposed to come with the monitor holder?
A nato rail comes with each handle. That’s why I didn’t list it.
@@TheBrotographer Ah ok! Thank you for replying! Awesome video and setup!
No worries!
Nice video
I attached the 2005 handle (believe it's the same as the 2084 with that number indicating that it just comes with the rail) and notice that the gimbal arm clears the screw so closely that you can't even see the clearance in between. Doesn't seem to be an issue but is yours that close and never had an issue?
All you have to do is takeoff the washer from the screw and it easily clears it.
I have all the parts but I’m missing the rail that the monitor clamp mounts on. What is that part number? It’s not listed in the description
It comes with the handles. Did you not buy the handles?
The Brotographer I have the handles but they didn’t come with them
Did you order the same handles?
What's your solution for storing this? Do you take it all off to put it back in its case or did you just make a new case for it?
I would typically just take the main gimbal handle off and throw it in the top section of a backpack.
@@TheBrotographer just Velcro to stop it from smacking into itself?
Yeah I’ve done that before. Super simple.
What do you use the little mount on the side of the ronin for? Under The handles where the focus wheel controller goes.
I have a little cheese plate on it.
Would it be better todo this option? or go with the SmallRig Dual Handgrip for DJI Ronin-S and Ronin-SC Gimbal BSS2250 ?
Are thumbscrews on the 2 upper NATO handles going to prevent the gimble from doing the 180 that it does when the trigger is pulled for pointing to the user?
They do hit sometimes like the Leslie said, but it’s not bad. And I never use selfie mode.
You didn't give the part number for the Nato rail that goes with the monitor clamp. You said it was something extra? At 2:30 you say don't worry about this part right now?
That part comes with each handle.
@@TheBrotographer Thanks
Absolutely
What HDMI cable are you using to go from your Atomos to camera? Is the coiled 12” version long enough?
It’s a thin one off of Amazon. Personally I hate the coiled one. It’s way too big and bulky.
Great setup going to buy it right now. Do you think this can hold my atomos ninja inferno ?
Oh yeah. It may not be able angle down as far because it’s a 7 inch screen, but it’ll work nonetheless.
7:01 face recording ? What’s that ?
Looks great, but why is Small rig not selling it as a complete package?
Not sure.
Wonder if this would work with the SC?
no, the sc collar has a weird shape above the control area, doesn’twork with the smallrig collar
@@GeoffreyThomasGonzales I learned the hard way by ordering one and then realising this. Smallrig now sell an alternative for the SC
Jodie Holland which part do I need to buy sc specific? Thanks
Jodie Holland, please advise which is the alternative?
Hey Bro, ordered these from Amazon in Australia but when I just fitted them the lower arm on the gimbal that swings around hits the screw tabs on the top of the nato mounts on the handle!!! Am I the only one with this problem? ADVICE PLEASE
Take out the washer as described in the description. It’ll then work.
2:32 you said not to worry about that piece, but it seems to be an important piece my guy. I purchased everything except for the nato handles and the clamp. Does it come with one of those purchases?
Yeah it comes with the nato handles.
@@TheBrotographer gotcha. I didnt purchase the clamp or nato rails yet🤦🏿♂️ thanks for the reply. I really appreciate it ✊🏿
@@TheBrotographer last question is that piece mandatory?
If you want to mount the monitor with that specific monitor nato mount then it is.
@@TheBrotographer lol which screws hold the nato rail in place?
What about the focus wheel? Any advice for mounting the ronin focus motor and a display on the ronin s?
That’s the only thing I need, I have to be able to focus. Did you solve this?
NATO Handle screws hit the ronin s arm; there's no clearance for the gimbal if you want to use the 360 rotation.
Take out the washers and you’ll be ok. Do you used 360 rotation very much?
I have the nucleus nano focus wheel on the side of the gimbal were the DJI focus wheel goes do you know if that would fit with this handle setup
Just S would like to know this also.
OJA HD the handle setup does not work with the nucleus
I just gt a nato rail long one screw at the collar where above the thumb stick and mount the ninja S below. this way u can save all the other parts and cut some weight
andugo can you post a pic?
Thumbs up to the video. Thumbs down to the hat. haha
Haha are you from Houston?
Do the AF features change with the smallhd monitors? Or is it the same since it's still HDMI out? Also, any tips on cable management? Looking for a neat solution. Thx!
Yeah unless you’re only recording externally, the face tracking in 4K won’t work on any monitor unfortunately. I don’t have an elegant solution for the cable, I just route it through the SmallRig plate.
Hey so I got mine all set up! Did you notice that it racks the axis arm on the handle screws? Is there a way to prevent that from happening? It seems like the screws are too high and get in the way.
In never use inception mode so it never hits for me. That would be the only time it hits. Some people have files them down just a hair.
Thanks bro ❤❤❤❤❤❤
Absolutely!
Has anyone tried this on the Ronin-SC? It seems only part 2221 (SmallRig Mounting Clamp for DJI Ronin S Gimbal) must be replaced with BSS2412 (SmallRig Mounting Clamp for DJI Ronin-SC Gimbal). However, from comments above this part does not do the job. Apparently there is an alternative... ANY IDEA WHICH PART?
Bought all the pieces for just the Monitor Setup, and I am missing the piece that ''you say to not worry about since it is included in another item you purchase'' Please help
The nato rail is included with the handles.
On your set up can you add a powerbank?
Yeah you probably could.
hey , i bought everything but i dont have the " extra piece " where can i find it ?
What extra piece?
@@TheBrotographer 2:33
@@luma.officiel I believe thats called a nano clamp
the ronin will hit the thumb screw of the smallrig grip
handle
You need to take out the washers in that screw.
So I got this setup and it’s great but if you try using the joystick to pan the camera left or right the lower arm hits the fasteners on the handle grips. The same thing happens when you try ‘selfie mode’ or in flashlight mode try doing a 360° shot. I’m a little disappointed. If the handle grips were further out...problem solved. I tried disassembling and flipping and grips upside down so that the fastener was on the bottom, but the handles aren’t build for that. Bummer. Still a nice setup. Maybe someone has a solution. Thanks!
I added an edit in the description after I made the video. You have to take out the washers in those handles.
The Brotographer Thanks!
@@doctajonz2828 Absolutely man!
1522 rail bridge not found
what cable do you use? I have a coiled one like if it suddenly does selfy mode does you're cable snap?
Here you go: amzn.to/2wKzRiL
How well does this setup work for underslung mode?
How to remove the washers? can you saw us?
NATO RAILS FTW!
What was this intro song? Subbed!
Hi, can I use this SMALLRIG Dual Rod Clamp Rail Block for 15mm Rod DSLR Rig and Support System - 1806?
The one you mention SmallRig 15mm Rail Bridge 1522 it’s out stock for the moment.
You can find in Ebay
Just got your setup. The knob on the handles gets in the way of the rotation of the gimbal. Did I do something wrong.
Did you receive that extra piece at 2:32 he is referring to?
@@jdillard36 Yes, I do have that piece. The problem is the tightening knob on the top of the handles. When the gimbal pans left or right the panning arm hits the tightening knobs on both sides. Granted, the gimbal has to turn ninety degrees before it hits, but still not ideal. I am sure I messed something up but not sure what. Thanks for the reply.
@@mklein345 where did you get that specific piece from? Or what did it come with? I ordered everything, but i dont have that piece and i dont know the name of it.
@@jdillard36 The part came with the handles. Part # 2084.
What's the hdmi cable?
I don’t remember the brand.
Can you still use one of those handles while in low mode or still have to hold ronin from stand?
well @The Brotographer ?
In that scenario I prefer to hold the single handle.
can you DM what kind of letter or proposal you send this companies to get you to send you free stuff to review? Ive been trying to get Sailing products to review but no luck.
PROBLEM with this setup..Hey buddy.. thanks for this.. i did the same thing, but the screw knobs on top the nato handles rub against ronin s , making it impossible for it rotate around..
Check out the description. Take out the little washers in the screws and you’re good to go!
@@TheBrotographer thanks bud.. let me try that
It’ll work.
@@TheBrotographer Came here looking for an answer about not being able to go into "selfie" mode with this setup (which I also bought). Didn't read the description to learn about the washer removal. Thanks!
Absolutely!
How do you control ronin 2/ camera with this two hand set up?
I just hold it with 1 hand when I need to switch a setting.
Hey! Where do you stick your mic?
Typically have a wireless mic pack on one of the handles.
@@TheBrotographer I'm running with a Rode VideoMicPro+ Can't operate the Gimbal in underslung mode. Might need to look at options. Cheers for the reply. What's the music on the vid btw? Make.Art.Now has it on one of his vids.