How To: Fix a Sagging Garage Door
HTML-код
- Опубликовано: 20 апр 2023
- We share a guide on how to fix a garage door that's on its way out to extend its lifespan and prevent the panels from flexing and breaking. This is an affordable alternative to replacing the garage door.
@KhamitArdashev 's guide • garage door sagging fixed
Impact Driver and Drill Kit amzn.to/48lPnOG
Impact Socket to Drill Bit Set amzn.to/47aAAVZ
Upgraded Batteries amzn.to/3TUvn1N
Hex Shank Drill Bits amzn.to/3vj6X7w
vlogs
0001 - planting trees • planting trees
0002 - garage tv • garage tv
0003 - garage workbenches • garage workbenches
0004 - FIXED HVAC BILL. • DECK DOOR WINDOW BLIND...
0005 - How To: Fix Marble Floor Holes • How To: Fix Marble Flo...
0006 - How To: Fix a Sagging Garage Door • How To: Fix a Sagging ...
0007 - How To: Remove In-Wall Speaker Grills • How To: Remove In-Wall...
0008 - Clogged Sunroof Drains Almost Totaled my Cayenne • Clogged Sunroof Drains...
[ BUSINESS / INQUIRIES ]
email ruslanvideofilms@gmail.com
instagram / ruslanvideofilms
[ Guides & Diagnostics | Cayenne (957) ]
957 Guides & Diagnostics Playlist • Guides and Diagnostics...
Cayenne (957) | Guides
www.planet-9.com/threads/guid...
Cayenne (957) | Diagnostics
www.planet-9.com/threads/diag...
[ Guides & Diagnostics | Boxster, Cayman (987) ]
987 Guides & Diagnostics Playlist • Guides and Diagnostics...
Boxster, Cayman (987) | Guides
www.planet-9.com/threads/guid...
Boxster, Cayman (987) | Diagnostics
www.planet-9.com/threads/diag...
[ SEE MY RUclips ]
Car Tips • Tips | Cars
Home Tips • Tips | Home
vLogs • vlogs
[ MUSIC ] Karl Casey @ White Bat Audio • Chill Retro Synthwave ...
[Music]
Twilight Voyage by Ghostrifter Official bit.ly/ghostrifter-sc
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3Dne3qN 
Хобби
Did you fix your garage using this method? What'd you think? Let us know!
Thanks for the tip
You’re welcome! Thanks for watching! 🙂
Quick bandaid fix for DIY
Panels are still sagging lol
This will last for a little bit but when the panels continue to weaken from cracks you’ll be in the same spot.
Putting on a real garage door strut bar across the full length of the door would fix this. And you only need one. Install it on the top of each panel connected to the hinge
Thanks for the heads up. can you share a link for the full length strut? -(asking for a friend?)😛
@@RuslanVideoFilmsgo to google type in “garage door strut bar” Presto, of course Amazon has them
Hello can you send me a link for the cross bar? Im having the same problem and I dont know which one to buy. Thank you in Advance!
www.homedepot.com/p/Everbilt-1-1-2-in-x-96-in-Aluminum-Angle-with-1-16-in-Thick-802597/204273989
^ Can play around with the thickness!
I often hear about weight issues being added when installing the crossbars, and the spring playing a factor in possibly being replaced to compensate for the weight - did you have to adjust the spring tension or find anything wrong with keeping the same spring installed?
these bars don’t make a tangible weight difference because they are so light and the door is so heavy relative to them
Thank you - stopped by my ace hardware to pick up the angle bar ($30), and took 20 minutes
one shouldn't use punch angle strips to fix a sagging garage door. Use the proper kit that spans the entire length of the garage door.
The punch angle L brackets like the owner in this video used above will wear out and bend. search "Heavy Duty Garage Door Support Reinforcement Strut Kit" and you will see the proper u shaped strut support to fix sagging door panels.
This fix has been successfully working on grandma’s garage door for the better part of two years. If the metal is thick enough it will wear out long after the rest of the garage door. At a fraction of the cost of a kit
You're putting too much pressure to the Opener by letting the door open way too far. that's why you damaged the door.
That is a very helpful insight, thank you. I’m going to look into whether the height is something one can regulate.
@murd777, isn't the door supposed to be fully opened? What do you mean "put too much pressure" and "open way too far"? My door is always pushed to the full top by the cable. Maybe the spring is too tight?
You are full of sh*t! The door sagged because it was made cheaply using thin metal sheets. It has nothing to do with the opener. I am a handyman by profession and fix this problem often using the same angle irons.