Xiaomi 12 Pro vs OnePlus 10 Pro - Durability Test!
HTML-код
- Опубликовано: 29 апр 2022
- Today we durability test the Xiaomi 12 Pro! Check out Truebill & download for free here: www.Truebill.com/JerryRig Huge thanks to Truebill for sponsoring this video. The OnePlus 10 Pro and the Xiaomi 12 Pro are about the same cost, and have about the same specs. Today we compare the durability between the two android phones to see which one holds up better under pressure.
Get my Shirts and Razor Knife here! www.jerryrigknife.com/
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/3LyfW8d
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad. 
Хобби
Should test midrangers from different companies to see which one survives it
Zach should totally do this, he should take midrangers and combine them all in one video.
He can especially last few yrs but atm he's kinda busy building his EV. Maybe he'll be back at testing more phones once he finished building his EV
Like Galaxy S21 FE
I totally support your idea.
no
OnePlus has basically cracked the code for how to disappoint one of the best developing community.
Because Oneplus already Settle.
Imo they settled after the OnePlus 6/6t.
-oneplus 6 user.
just how zack cracked that oneplus he tested
@@Patient_Lion_BS exactly. OP 6 was my last OnePlus.
@@Patient_Lion_BS Wrong, after the 7 Pro/7T Pro.
Always a good knowledge a about durability of a previous and a flagship level phone by you sir...keep it up...
I really love all your vids and seeing how stuff works. I wanted to ask if you could maybe find a way to make a Budget Electric skateboard compatible with a stronger longer lasting battery, along with switching the ESC (electronic speed control). Or even finding a way to hook up a mini solar panel on to the Deck of the board that helps the battery charge as well. :D you up for that challenge?
Would it be possible to add durability tests against dust and water? We all know some manufacturer won't get IP ratings, but i think it's important to know how much can the phone survive in "messy" environment
He does dust testing on foldable phones. Doing the same test on the normal phones seems little to no effect on those (unless the the structure of the phone is so bad dust can easily enter)
@@HanxoHaxashi I think it would be pretty nice to see how resistant the phone is to submersion in water, sand, and semi solid things likes grease and stuff for people who do a lot of outdoor work
Zack is all aesthetics and nothing else. He does the same video he has always done, and that does not tell us anything about the phone.
Example: If he took any of it seriously he'd compare how much force the screen takes to scratch - there were lots of improvements in front glass tech - while, yes all of them scratch at level 6 with deeper grooves at level 7, some might require 35g of pressure and some other might require 70.
@@rishabhrawat7856 I agree. he should replace his bullshit flame test with that instead. and also add in a waist high drop test on solid concrete.
@@Ezio470 you're in youtube, there's so many channels that do that
It would be hilarious to see how the frosting screws up a display (or like a timelapse kinda thing, to see how the display slowly becomes illegible).
I'm viewing this on a frosted/matte screen, it's much better than a normal screen because it doesn't reflects light.
Not one illegible, but also unusable as it now sands you fingers.
Definitely get the frosted glass kit. It would be awesome to see how well that works.if you don't mind destroying something you could try to do it super fine on the screen. I've heard of textured glass screen protectors that reduce glare. I don't know if I would use it on a phone but I can think of several other things I could use it for.
06:20 I would love to see this, as well as trying it on some other things like plastic, metal or even polycarbonate. Great video idea, could be a tutorial too.
Hitman before: *Eliminated targets, followed given orders*
Hitman now: *Takes care of his wife, builds an EV from scratch and destroys phones*
Lmao😂
you need to eliminate stress cant let it build
at some point you should invest in a fancy tester that can repeat the flexing with the exact same strain on the phone for even better cross-phone comparisons.
Exactly my thoughts!
Up
They aren't realistic though. These are realistic tests with a humans natural force. Those machines can never replicate the exact pressure and placement of a human.
It also kinda kills the fun in watching it happen. I'd much rather watch a phone get crushed by hands than a machine.
@@RealityClubX your first point is complete nonsense, but yes, it would ruin the fun a bit...
I think a realistic brut strength approach is what the mob wants. Gloves, it what he needs to invest in. Will just remove that, tiny little sliver, like a little Lego, from my thumb 👍🤔
Was desperately waiting for this video on your channel
Will the fingerprint sensor accept new fingerprints after heavy scratches? The user case will be the OS has been hard reset after an OS upgrade.
Would love to see the glass etching process.
Would love to see the etching paste put to the test. You should do it at the top of your hummer windscreen. Give yourself a built in sun visor :)
I would love to see that paste used on a screen as well as a back panel. As it is I use matte screen protectors and I think it would be neat to see if a screen could become matte just by using the paste.
Smartphone screens are covered in oleophobic material, probably made out of Teflon, this is what gives you that smooth scrolling experience when the phone is brand new. To be able to etch glass, this layer would have to be removed first, using some pure alcohol like isopropyl alcohol for example, or something else that can dissolve Teflon.
Would it work as thermal paste as well?
@@Zendarkos there are exactly 0 solvents that can dissolve teflon at ambient temperature.
Glad to see you back doing the content that made me such the huge fan I am today if you can try to play with the nord devices not sure how durable they are though
Love the new clear Knife, received it last week and now I always carry it with me its cool and very sturdy.
"Dad, when will the world end?"
"It'll end when a phone scratches at level 7 and deeper grooves at level 8"
AAAAAHAHAHAHAHAHA!! Excellent comment!!!🤣😭😭🤣
Got my JRE knife this week!! It cuts well. Thanks!
Hi, must say love your vids of testing durability of phones in the mechanical way. What is your experience with screen protectors that claims a hardness of 9? Say for example Panzer Glass made here in the EU.
Hey Jerry, could you do the Xiaomi Mi 12T Pro? I would really love to see how the sensor of the camera looks like disassembled to see the claim of their 200MP and what size of sensor they have.
The OnePlus 10 pro really is a disappointment isn't it?
As usual bugs with os.. Nothing new..
@@roninr8199 I've never owned a OnePlus and I was waiting for the 10 pro, I think I'll just keep waiting
Durability and software wise yeah kinda
Two things it does really well though: charging speed (not 150W like the newest OnePlus devices but still fast) and battery life (beats the S22 Ultra). Other than the improved cameras I'd say it's a disappointment otherwise.
Oneplus has been a disappointment ever since they sold out at around the 7-8ish era
I think it would be cool to see how the etching stuff works. You could try to make a glassy back phone matte
would like to see your mini diy frosted glass project, it kinda reminds me back in the day your old video about making transparent back glass
Love Xiaomi phones but with the changes AT&T have been making i cant use them anymore and the other carriers suck around where i live, had to switch from my poco F2 pro to a oneplus 9 pro, i much preferred Miui over Oxygen os , much more customizable with a less boring aesthetic than oxygen os
MIUI Is trash,It work so bad,terrible software,Oxygen Is much more better
@@vladimirorottoinculen7156 One plus is trash
@@destroyinghaters nah
@@vladimirorottoinculen7156 one plus fell off like 3 years ago
@@destroyinghaters repeat Oneplus Is much better that Xiaomi,and even if OP Will have ColorOs software,Will be much and much better about that trash Who s Bug Miui
This is honestly the nicest design I've seen in recent years. I really wish Xiaomi would come to the US.
You won't get privacy as much as iPhone and SAMSUNG. Perhaps, Xiaomi may get banned just like Huawei.
Its UI sucks. Nowhere near OneUI and iOS
They come installed with even more bloatware than Samsung has on their phones, but it terms of hardware, they're phenomenal for the price. My dad has a Redmi Note 10 Pro (costs £219) and the pictures taken on it are almost flagship quality. The battery is outstanding as well.
@@subhojit2003 one ui is literally the best ui on any smartphone, comparable with only iOS, this Chinese trash ui is way too bad
Xiaomi have a habit of increasing there prices abroad and for lower spec , here they are cheaper and higher spec so more value . I have the 11t pro and that 120w charger makes a difference
I think the flame test is important in case someone drops it in a fire place. Or has it hovering near a BBQ. It's good to know that open flame takes time to hurt it rather than immediately combust.
The only combustible part of the phone is the battery. He is pointing a lighter at a point on the screen. An open fireplace/bbq is much hotter and heat spread out and dropping a phone in it will almost always result in a broken phone.
@@TorchCTI that will obviously happen, but it’s not really a problem. And every phone does this, unless they’re not waterproof at all and don’t even have their screens glued on.
no, flame test is useless, and that's ok
Or a plumber resting his blow lamp on it.
no shit, the whole test is pretty bullshit.
scratch test ? all phones scratch at 6-7 unless sapphire
flame test? plain stupid
scratching the sides? obviously will scratch no matter the material...
Great vid as always Jerry. We want to see how the Realme GT 2 pro holds up!!
Love watching your videos. They are somewhat relaxing and chill I don’t even care about new phones lol
I love how Zack forgets to remove the screen protectors before starting his tests 😀
I always wonder if that's on purpose, or he just doesn't check 🤔
He doesn't forget. He does it to show the hardness of the screen protector. Plastics have a huge range of hardness. Some plastics get fairly close to as hard as mineral glass.
I think that it is to give praise to companies who pre-install them.
I would love to see you do retro durability and tear downs. Like say the original razor.
Even better the nokia bricks.
Absolutely love your videos! Thank you for the entertainment you do) However, would you consider to test Sony phones, like Experia pro-i? Very interesting phone as far as I am concerned 😃
I currently have a Xiaomi Note 9 Pro with all the bells and whistles I want (bar-one): dual sim & SD card slots, IR blaster, FM radio, large battery, 3.5mm jack and USB C. My last phone was the LG V20 (V10 prior to that) - all still working well. Tough as nails too!
So my next phone will need to have all of the above.
But cost less than $400Aud.
Chances are that it will be another Xiaomi as no one else comes close spec or cost wise.
So I'd like to see you test a few more of lower cost phones like this.
Have u tried making a cool shattered skin for phones or make one where the shattered pieces have fallen off showing the circuits behind now that would be intresting to see instead of a plain color or clear
Would love to see the quad speaker setup they claim in the next teardown video..😄
it actually has, and I was even able to notice it as I look closely to the speaker grilles.
Two twitters and two woofers. But it didn't make any difference, I have done try it.
@@AminNazari666 One thing I also noticed is that it isn't that loud compared to my Xiaomi 11T here. However, I like the quality. Very balanced on both sides and the bass punches very well. It's just it isn't that loud which is a bit underwhelming.
Hey @Jerry, Can you please do a durability test for Moto Edge 30 Pro or Edge x30? Big fan of your work!
Hi Jerry, is the any phone can survive to level 9 deeper grooves ? Cuz 99% of yr test i saw only level 7 deeper grooves
Seeing an iPhone being frosted would make a really neat video. Not sure many would be brave enough to try it for themselves though.
I would like to see jerry really go to town with the scratch test in more of his videos, lets see lvl 8 and 9
You should definitely try the frosting toothpaste thing. I wanna turn my phone's glass back into frosted one... 😅
In lieu of the flame test, can we try some drop tests ? Tests external glass and internal composition further explored during teardowns
No matter how famous Jerry is, he stays true to his original youtube content "durability test of phones"
I’d enjoy seeing what affect frosting glass yourself has on a smartphone
Xiaomi 12 vanilla version is actually smaller at 6.28", it'll also be interesting to see if the smaller stature compromises the device's structural integrity compared to the larger ones.
Or will it actually be tougher?
The smaller one would be denser so it would survive better too
Feels weird and exciting to see the phone you are using getting tested and im glad that it passed the test as well :D
same
I want to get the Xaomi 12 pro , can you give me the go ahead?
@@michealscott6156 well what are u looking in a phone , i wanted something fairly priced with good cameras and hardware and i got that with 12 pro.
From my personal use its a smooth phone but Battery isnt an all day battery but that insane fast charging makes it up for it if u are able to use it.
I do not game on my phone but at heavier tasks it might overheat a bit so if u wanna game on it for long time it might overheat so keep that in mind.
The Cameras are excellent atleast for normal daily use.
Again the phone is smooth good daily driver but keep in mind the forementioned issues. Ask me anything else if u are interested still or have Questions about it
finally a non-electric-car video! havent clicked faster in my life
I have been using mine Redmi Note 7 for 3 years now. I never had any issues and I plan to keep it until it dies.
This phone failed the bend test, and mine is a bit curved, but still I never had any issues with this. I have dropped this phone a few dozen times.
I am currently running Ubuntu Touch on it, and I couldn't be happier with a phone that cost me new ~200€, without any stupid phone carrier contracts.
Did you face any difficulty while installing Ubuntu touch on Redmi note 7, i have a redmi note 7 pro and i want to install Ubuntu in it. can you tell me the whole procedure to do that.
Dude, you have low standards.
nice
maybe try some books on it for awhile to unbend it
@@mohamedmostafa-qj5mx 😂
but miui still shit until.this day so many little bugs, im not complain because they're cheaper than others
Make a video on the durability of the new iPad Air 5 2022. There have been a lot of complaints on its build quality.
The glass Etching video sounds nice
I've been watching these durability test videos for so damn long and it still hurts every time ☹️
The metal on metal scratching hurts my brain.
Exactly , I don't get the propose of this test. Metal is metal and there is no need to scratch it
@@Daniel-iy1ed how would you know it's metal without scratching it first
@Duka Duka
One scratch on one side should be enough. Plus we have magnets 😁
@@Daniel-iy1ed mmh yes time to attract some aluminum with magnets man
the Mi 12 series is one of the best looking phones to come out this year. it is simple, elegant and classy.
But everything else about the phone apart from the display is not the best value for money for $999.
no MicroSD slot and 3.5 jack is a huge NO NO from me.
@@VisionaryTech but in India it just around $685.
@@Freestylah this is a lost war. Smartphone companies just dumped SD slot and 3.5 jack, just to push their Bluetooth headphones and bigger storage models.
I would lobe to see the Realme GT Neo 3 be tested. Planning to get that Dimensity 8100.
That popping sound was probably charging port breaking, you should test if the phone's charging works after a bend test.
I'd like to see more midrange phones too.
Idk why but zack’s durability test’s are so well done and when you hear his voice it feels so calm!
I would love to see you do teardown comparisons of a US/EU version and an Indian/mid east version there are many reports of hardware issues in India.
Zack, durability test the One Plus 10 pro (the international version as I think the version you tested was the chinese version)
Zack, why isn't there a Mi11 ultra teardown coming? :(
4:42 I peal a potato like this
But
Jerry peal a cell phone like this
Could you implement drop and water tests to your durability tests? Also the fire test doesn't make any sense at all xd
That's what i was waiting for, thank you 😊 Now waiting for the "Teardown"
May I request a Durability test of the Realme GT 2 pro.... It has 2 versions (a polycarbonate back on the green and white colors and a frosted glass back on the Black and blue colors)
It would be informative to compare them both
It would love to see how it tested on other RUclipsrs even though there are that already made the test
Checking out if the "paper" green or white could survive in Zack's hands, might be fun to watch actually!
The xiaomi 12 users say it has quad speakers, while the 12s only has dual speakers - would be interesting to find out more during the teardown (if there's gonna be any) - and how easy/difficult it would be to repair the device
Can we get higher precision scratch tests? for example mohs hardness scale of 6.2, 6.5, 6.7? It would be interesting to see becayse all these phones indeed scratch at level 6 with deeper grooves at level 7, but they all use different types of glass that claim to scratch less than others
at this point its just a meme he does it for the views not to really test the screen
hi zack. huawei is saying: the gt3 pro titanium watch is made of sapphire. sounds interesting. isn't it?
OnePlus Fold looks awesome
3:28 Not gonna lie they got me.
It would be great to see this thing that makes glass frost like. I’d love to see you try it on the most beautiful smartphone ever made, the Galaxy S6 in Emerald Green
I would enjoy seeing some hobby projects with Zach for some weird phone mods.
OnePlus 10pro be like : Dude, this is so much 😩
Or i can't take it anymore
I don't pay attention to a single thing you say until you say *scratches at a level 6 with deeper grooves at a level 7...*
Me too 😅
@@Sahanawaj_ that's my favourite quote!
Hi Jerry, Did I miss it or Zach didn't make a teardown video on the Galaxy tab ultra??? Unless he kept it for himself after seen how strong that thing was :))
I would be great to make a tear down and check its main camera as it is a huge sensor, also check it out next to OnePlus sensor size
7:28 Here's what you came for.
No headphone jack sorry still stay on Motorola 5G:)
At 03:56, you can see Magisk installed: Did Zach root it or Xiaomi shipping rooted smartphones now 😂
I'm glad I'm not the only one who noticed it!
i would love to see how well the sony experia 1 3 holds up compared to some of these other phones
The alu scratching with the boxcutter always gives me goosebumps and shiver. Like scratching an old school schoolboard with your nails.
Hey what's up Jerry I've been waiting for this video nevertheless great video
I hope you and your family doing well
A wish to get s22 ultra 😁
This is the only Xiaomi flagship that looks good from bezel perspective.
"bEzELs"... People that care about bezels are the reason that cellphones can't be used one handed without accidental touches. They care about how it looks more than being able to actually use the phone.
@@littlejackalo5326 I missed the part where that's my problem
@@littlejackalo5326 BTW you can hide notch and get more bezels
New "Art class with Zach" with Glass etching. I'm here for it
nice review video, every time I see you trying to pry a smartphone I think why wouldn't you buy a kind of hydraulic press so you will be able to say on x point with x pressure the phone still survive ?
I'm impressed the Mi 11 did better at the bending test than the 12 Pro
You should add a new bend test involving your massive biceps
is it possible to sharpen the razor(or a knife) with that back glass?
possibly a video with microscopes to see how the blade changed?
Debería probar a los rangos intermedios de diferentes compañías para ver cuál sobrevive.
0:10 “May he rest in pieces” 🤣
Jerry i really feel that the OnePlus 10 pro you encountered was a faulty unit or maybe it was an issue with the Chinese variant would love if you could retest it.
I don't think Oneplus would dare to send a global 10 Pro for retesting
LOL. Definitely not faulty. They're all made the same.
Yes brother please make ur own frosted glass in a clear glass phone experiment
You are the NCAP of phones and I'm glad. I own a Xiaomi mi 10 t pro and honestly it can even cope with the new devices.
why is this 5k?
As I am about to move to a different brand (from Samsung), this is the first phone that caught my eye. I love how subtle and non-flambouyant the camera piece is. If my local service provider would have this available I might actually get it.
Check on the miui before changing from one ui
I would suggest you stick to samsung. Mi is notoriously bad with its ui.
@@sriduttlanka6475 I would love to honestly but the S series from where I am ships with exynos only. And I friggin hate exynos to the core.
@@amalkrishna8673 I played around my friend's Mi 11 and she also gave me some work arounds with the ad issues with miui. Until I actually use it on a daily basis, I can't say if I would love it or hate it but yeah, OneUI is really good tbh.
order from aliexpress?
Can we have some tests for how likely for the back to get stained permanently. Sure the testing would be messy but it’s practical to test as we are moving away from back glass on few cases.
I'd love to see a durability test to some realme devices such as GT2 & GT2Pro....Since they're up to flagship phones for the first time.
The weakness that occurs in a device is caused by the thin frame because the screen is curved, so this affects the durability of the device
Wtf are u on about! curved glass has much better structural strenght
I'd love to see a teardown of this phone, or any other xiaomi 12 variant
i hope you make durability tests of budgets phones like in 200 dollars range
Parabéns pelo sucesso do canal.
Manda esse xiaomi pra mim 😅
Nah in UK 12 pro cost £1049 and OnePlus 10 Pro £799. 12 pro in UK is complete ripoff
Just from curiosity, how much the Realme gt 2 pro costs in uk?
@@Alex__37_ on Amazon £786
I find it hard to watch these "durability" tests. Some of those phones are quite costly.
He can afford them, don't worry.
@@user-jp1qr1nj7v That's not the point
Nice segment into the ad 👏
6:40 He didn't want to use the term LTPO technology, so that newbies, will understand what the technology is