JoeX did the 1095 BOB and was not impressed. I was surprised that the Gerber Strong Arm took more abuse. I have a old 1095 BOB. I ground off the fire steel notch leaving maybe an 1/8” pommel, it helped the knife’s balance. After about 10 years and multiple sharpening’s mine cycles from a true “Scandi” then a micro bevel to a v-edge depending on how bad I mess up the edge.
No se si los videos de JoeX de verdad sirven como referencia, Hay demasiadas cosas que pueden cambiar el resultado, y hacer por ejemplo que aguanten mucho más o menos, el Gerber LMF2 aguantó bien en los videos y yo lo tuve nuevo y usándolo de manera común se quebró por dentro, absolutamente decepcionante
@darienfernandorodriguezcam484... I have never tried the LMF2. The Gerber StrongArm put up with a lot of abuse, I just never liked the design. The Tops Bob is still my long time beater tank of a knife...
The only thing I've ever sharpened on my belt sander is a lawnmower blade, I've never thought to try any of my knives on it. Maybe I've been doing it wrong all these years, spending endless hours using stones...lol You seem to get really good results though, maybe I should give it a try? 🤔Anyway, that Tops knife sure is a chonky little fixed blade and I like it. Thanks for sharing and Cheers!
I have this knife. The best spot other than the edge to push a spark is on top of the knife right behind the tip. The groove in the pommel is pretty much worthless.
Tops charges way too much money for the B.O.B. For that price, you can definitely find a blade in 3v or magnacut, which will be lightyears better than 154cm. I unfortunately purchased the B.O.B long ago, and its the only knife I regret buying. I'm going to try to sell it, even if I take a loss on it.
No they are buying it to be "Cool" and look like a bush crafter. But I'm like you, I don't do bush craft. I just hike and camp. And I've got lots and lots of knives. Not sure you've seen it yet, but I did the Three knife bug out challenge. Wasn't easy to pick three knives out of my collection, well, except for the folding knife.
Another great vid! I have a B.O.B. and don't go to it as much as I should. It's a knife I would highly recommend, yet I usually gravitate to my slightly less weighty/beefy options. Shame on me. I also agree that bow divots should be thrown out on knife handles.
I'm so confused. Maybe you can help. WHAT IS THE DEAL WITH 154 steel? Some RUclips knife guys say its UNDERRATED... others say CPM154 and 154cm are nearly the same. Lately, I hear this steel is OVERRATED. I have avoided buying great looking knives in this steel, because i'm confused by all the propaganda. Is it STILL working ok for you, what are YOUR thoughts
So take away the features that make it useful and a bushcraft k ife so the name can just be a name like 90% of other knife...lmao this knife just isnt for you and you dont know how to uae the notch right for the striker
Great look at this blade!!! You’re prob 💯 correct that very few people would ever use this to start a bow drill fire!
Very true!
JoeX did the 1095 BOB and was not impressed. I was surprised that the Gerber Strong Arm took more abuse. I have a old 1095 BOB. I ground off the fire steel notch leaving maybe an 1/8” pommel, it helped the knife’s balance. After about 10 years and multiple sharpening’s mine cycles from a true “Scandi” then a micro bevel to a v-edge depending on how bad I mess up the edge.
I never liked the Gerber...traded it for a pile of old axe heads...
No se si los videos de JoeX de verdad sirven como referencia, Hay demasiadas cosas que pueden cambiar el resultado, y hacer por ejemplo que aguanten mucho más o menos, el Gerber LMF2 aguantó bien en los videos y yo lo tuve nuevo y usándolo de manera común se quebró por dentro, absolutamente decepcionante
@darienfernandorodriguezcam484... I have never tried the LMF2. The Gerber StrongArm put up with a lot of abuse, I just never liked the design. The Tops Bob is still my long time beater tank of a knife...
You really base your opinions and decisions off the advice of Joex 😂
@Sfhakrn...Interesting that you would draw that conclusion from my statement...I’m amazed at how many people today see what they want to see...
It’s an amazing throwing knife of all things believe it or not
Ps I love good 154 I’d like to try it mines in 1095 but still one of my faves for practical woods use with the sheath
The only thing I've ever sharpened on my belt sander is a lawnmower blade, I've never thought to try any of my knives on it. Maybe I've been doing it wrong all these years, spending endless hours using stones...lol You seem to get really good results though, maybe I should give it a try? 🤔Anyway, that Tops knife sure is a chonky little fixed blade and I like it. Thanks for sharing and Cheers!
Thank you. And the belt sander definitely need practice on before hand lol
I like that one brother that’s a great piece!!!! Nice and thick thanks for showing it stay well out there!!!!!!!😊
Thanks for watching. Glad you enjoyed it
That’s what your mom said.
I have this knife. The best spot other than the edge to push a spark is on top of the knife right behind the tip. The groove in the pommel is pretty much worthless.
The ninja noise is in da house....LOL...Nice knife as that is one thick stock....Good stuff....
It won’t cut without it lol
@@peterbiltknifeguy 👍👍
Looked at this one, went with the Idaho Hunter in Midnight Bronze.🤘🇨🇦
Great knife and video brother 🔪👍
Thank you sir
Tops charges way too much money for the B.O.B. For that price, you can definitely find a blade in 3v or magnacut, which will be lightyears better than 154cm.
I unfortunately purchased the B.O.B long ago, and its the only knife I regret buying. I'm going to try to sell it, even if I take a loss on it.
No they are buying it to be "Cool" and look like a bush crafter. But I'm like you, I don't do bush craft. I just hike and camp. And I've got lots and lots of knives. Not sure you've seen it yet, but I did the Three knife bug out challenge. Wasn't easy to pick three knives out of my collection, well, except for the folding knife.
I’ll check it out
i want this thing so bad!
Yes joe x has destroyed it 🎉
Wow do you have a knife sharpening tutorial?
I have 3
You came up on that trade bro 😎 that back is a scraper and you really have to use that to get bitch working. But knife is impeccable in construction
Another great vid! I have a B.O.B. and don't go to it as much as I should. It's a knife I would highly recommend, yet I usually gravitate to my slightly less weighty/beefy options. Shame on me. I also agree that bow divots should be thrown out on knife handles.
I'm so confused. Maybe you can help. WHAT IS THE DEAL WITH 154 steel? Some RUclips knife guys say its UNDERRATED... others say CPM154 and 154cm are nearly the same. Lately, I hear this steel is OVERRATED. I have avoided buying great looking knives in this steel, because i'm confused by all
the propaganda. Is it STILL working ok for you, what are YOUR thoughts
Well. It’s very tuff stainless steel. Most enjoy it. Some hate it. I personally love it.
@Peterbiltknifeguy “PBKG” thank you for your quick reply. Good advice
Turkiye Made "Bora Knives 518 MA DOST" Bushcraft/Survival Type Knife Similar Tops FieldCraft.
Joe x did the 1095 but not the 154cm
I wonder if the 154 would hold up to him
I don't think so but I think it would do good Joe x is a master at breaking knifes
He sure is
Joe x on youtube was able to break it rather easily
Cool
So take away the features that make it useful and a bushcraft k ife so the name can just be a name like 90% of other knife...lmao this knife just isnt for you and you dont know how to uae the notch right for the striker
Uh no. This particular one’s striker doesn’t work
Si ça fonctionne, dans l'autre sens !
*Before taking the video, wash your hands and clean your nails. Mom didn't teach you?*
Yeah no.