actually it takes four off! haahaaa!!! If you practice with that putter more than you would have with another putter, it may take more than 3 strokes off!
We use a variety of silicone plugs to protect threaded or tight spaces where we don't want coating. They can be found on our website. www.cerakote.com/shop/cerakote-coating/SE-3100/silicon-plugs
What do you have the psi to your compressor set at? Also, where do you have the airflow set to? Love your products. use them all the time. Trying to dial it. In even further. My issue is it seems I’ve been getting a lot of dry spray. I’m trying to figure out how to get that to Stop. Assuming I don’t have air inlet opened up enough. Also, what blast media grit are you using?
@@Cerakote do you recommend opening up the airflow as far as a I can? I will say the black widow airbrush pushes out substantially more paint that other airbrushes so I may be able to get away with it. I think my issue was I had the air flow tightened to far down so it couldn’t wet out the putter. What do you keep your compressor air pressure at? Elite series indicates between 30-25 psi. Is that where you keep yours?
Why do you feel the need to next level this….what about a normal person just looking to re finish a putter. Won’t be purchasing a Cerakote product. I would have yesterday and now wouldn’t recommend to an enemy
What? Refinishing is putting on a new finish. Cerakote is a new finish. I’m not sure what you are complaining about, people have different preferences for how something should look, and this looks good for the people who like it like that.
did you not flash cure the head before painting?
Does it take 3 strokes off your round?.....
actually it takes four off! haahaaa!!! If you practice with that putter more than you would have with another putter, it may take more than 3 strokes off!
Where did you get the paint fill tool. I gotta get one!
We've got them here on our website (Color Fill Pen SE-504): www.cerakote.com/shop/cerakote-equipment/SE-504/cerakote-color-fill-pen
4:03 would you let me know the tool name that fills lettering on the putter?
That is the Cerakote Color Fill Pen SE-504, and can be found on our site under shop tab.
It's called a color fill pen. Here's a link to it on our site: www.cerakote.com/shop/cerakote-equipment/SE-504/cerakote-color-fill-pen
what is the clear fluid added to the cerakote black?
Probably hardener
What is that paint fill pen called?
I’ve seen people use it for writing/ calligraphy
Hi, what media do you use in the sandblasting cabinet? Thanks
What are those plugs you’re putting in the neck to hang?
We use a variety of silicone plugs to protect threaded or tight spaces where we don't want coating. They can be found on our website. www.cerakote.com/shop/cerakote-coating/SE-3100/silicon-plugs
What size plugs were the ones you use ?
What do you have the psi to your compressor set at? Also, where do you have the airflow set to?
Love your products. use them all the time. Trying to dial it. In even further. My issue is it seems I’ve been getting a lot of dry spray. I’m trying to figure out how to get that to Stop. Assuming I don’t have air inlet opened up enough. Also, what blast media grit are you using?
I use the black widow airbrush.
The problem with the airbrush is that you just can't get enough volume to thoroughly wet out the coating.
@@Cerakote do you recommend opening up the airflow as far as a I can? I will say the black widow airbrush pushes out substantially more paint that other airbrushes so I may be able to get away with it.
I think my issue was I had the air flow tightened to far down so it couldn’t wet out the putter.
What do you keep your compressor air pressure at? Elite series indicates between 30-25 psi. Is that where you keep yours?
What series are those?
All were H Series coatings
What is this your pen?
Great process overview!
Can I use classic convection oven?
Yes, you could then main thing is ensuring that you have nice even heat, especially with thicker parts.
seems like alotta wasted cerakote for the paintfill....
Why do you feel the need to next level this….what about a normal person just looking to re finish a putter.
Won’t be purchasing a Cerakote product. I would have yesterday and now wouldn’t recommend to an enemy
haha, what? because they did a good job so you're embarrassed
Hey Nick, sometimes it’s better to think before you speak (or comment). Hope this helps!
What? Refinishing is putting on a new finish. Cerakote is a new finish. I’m not sure what you are complaining about, people have different preferences for how something should look, and this looks good for the people who like it like that.