The most important part to assure a successful job was left out. That first panel will determine the entire install working out. You should of shown the steps the installer took to assure it will be square, even if the wall is slightly off. Other than that, this is a pretty cool product.
You know from time to time I found myself using materials made by this company and they're okay I really don't have any complaints regarding the materials however if this company would like to save face I think would be a great idea if they took this video down and uploaded another video giving the proper steps of installation being at least an inch overlap on the top and at least a half inch on the left that's how you're going to start I loved all the information that was given prior to the actual installation in text form that was great. Also Hilti green laser for the win. As an important sidebar I'm noticing that this material is a medium tack adhesive. If you're trying to inform newbie installer how to match up a continuous image across multiple panels it would probably be wise to tell them to remove all the paper. A common mistake is not allowing for the slight discrepancy that the subtle lift that the folded backing paper will create. Also as much as I pride myself on being able to install all of this scale solo a novice shouldn't even think of doing this without one other person to assist with lining up the bottom of the panel. Vinyl installation is really a team sport we can do more and in less time as a team go team.
I been Paperhanger for more than 25 yrs.and i know that you should not hang over a sheen finish on walls,only primer.why did you choose a gloss paint as a primer under the paper?
PRO VINIL Hi There! You can go Left to right on right to left there is no difference in the final product, I've installed many wall and window graphics and the only time I choose a specific side is when I have a smaller panel at the end of the print cause I rather square that one at the end but that is just a personal preference.
he says to iverlap with the tool he is brushing. dont overlap the vinyl. so you go sideways pressing it to the wall the partially go over the same spot
how do you go on if painters, tylers ,shopfitters, office workers..are in your way ....you have a nice clean empty space. .......it works the way it does on a video but not in real life
Paint to cure 3 to 4 weeks..... Good luck with that. More so in a retail / POP build. Lucky if we can get these GC's to allow us a day let alone weeks! Toss in there issues surrounding the use and in some cases mandated use of the garbage low VOC paints and you have the makings for a great time.... (and gray hairs!)
Low and no VOC paints can certainly cause some headaches. We've found that adding a tint to the paint increases the success rate of applying vinyl to it. Not letting the paint properly cure can cause a whole range of issues. If you have customers who are really pushing you to not follow proper procedures, education is usually the best cure.
If you're not sure vinyl will adhere to the surface, it's always a good idea to do some tests. Feel free to call our tech support department at 888-672-2251. They can help you work through any issues.
MY MURALS WOULD PAINT A VANISHING POINT FROM YOUR TILE FLOOR STRUCTUREso as the person walked into the room the effect would be felt.. trees would bend on the ceiling but i would orchestrate any tall structures in the art to be ok if they did bend. Paint effects only go so far.
Yes, you can apply this product to glass. However, because it has a water based adhesive you should not use a wet application method. Feel free to call our tech support team at 888-672-2251 if you need product recommendations.
It really depends on how much texture there is on the wall. Please call our product support team at 888-672-2251. They can help you determine whether or not your wall is suitable for a vinyl graphic.
If you're looking to purchase material, you can contact an authorized ORAFOL distributor found on our website. www.orafol.com/gp/americas/en/distributors/search-by-city If you're looking to have a wall graphic created/installed, you'll need to find a local graphics installer.
I painted a way to make an underwater scene once by making a ship wreck your base there for bending wall effects would be forgiven because the wreck would still be in 2 illusion pieces to the mind would be ok to bend.
THIS IS A PROJECT I USED DREAM OF RUNNING iM A WALL MURALIST i CAME UP WITH A WAY TO RENDER TROM LOIEL MURALS INTO WALL PAPER CUSTOM FITTED TO YOUR HOME THAT REQUIRED A PROFESSIONAL WALL PAPER HANGER TO DO.. MISTAKES HERE MAKE YOU PAY FOR EXTRA COPIES SO HIRING A PROFESSIONAL IS A BETTER PLAN
Hi Teja, It's not wallpaper, it's printed vinyl. I would recommend contacting a sign shop or graphics company in your area if you're looking to have something like this created.
as long as you have bleed all around the printed image, you're ok. Now if you dont notice that your wall isn't straight before you begine, now you're entering a world of pain... as I have before :) ...experience teaches you though
Hola. Puede ordenar desde cualquiera de nuestros distribuidores. Encuentre uno en su área en nuestro sitio web aquí: www.orafol.com/gp/americas/en/distributors/search-by-city
Doing it this way, if your roof line is not square and runs out the wrong way you are stuffed! amateur installer in my opinion! you need to bleed off and trim back!
We are fortunate to have a newly constructed building with straight ceilings and square corners, but you're correct. If you're working with an uneven ceiling, it's best to include some bleed and trim it down after installation.
Хобби
The most important part to assure a successful job was left out. That first panel will determine the entire install working out. You should of shown the steps the installer took to assure it will be square, even if the wall is slightly off. Other than that, this is a pretty cool product.
You know from time to time I found myself using materials made by this company and they're okay I really don't have any complaints regarding the materials however if this company would like to save face I think would be a great idea if they took this video down and uploaded another video giving the proper steps of installation being at least an inch overlap on the top and at least a half inch on the left that's how you're going to start I loved all the information that was given prior to the actual installation in text form that was great. Also Hilti green laser for the win.
As an important sidebar I'm noticing that this material is a medium tack adhesive. If you're trying to inform newbie installer how to match up a continuous image across multiple panels it would probably be wise to tell them to remove all the paper. A common mistake is not allowing for the slight discrepancy that the subtle lift that the folded backing paper will create. Also as much as I pride myself on being able to install all of this scale solo a novice shouldn't even think of doing this without one other person to assist with lining up the bottom of the panel.
Vinyl installation is really a team sport we can do more and in less time as a team go team.
Me parece algo maravilloso!! Poder "meter" en casa el campo...el mar...las nubes... ma ra vi llo so !! Enhorabuena a esos manitas !!
Hai,
By what method should a vinyl graphics is to be pasted on wall in indoor snow temperature.pl see The vinyl should not peel off
I been Paperhanger for more than 25 yrs.and i know that you should not hang over a sheen finish on walls,only primer.why did you choose a gloss paint as a primer under the paper?
hello
I have a question
why begin to implement right to left cloths and not from left to right?
thank you
PRO VINIL Hi There! You can go Left to right on right to left there is no difference in the final product, I've installed many wall and window graphics and the only time I choose a specific side is when I have a smaller panel at the end of the print cause I rather square that one at the end but that is just a personal preference.
can I do wet application for mural on dry wall? Thanks
We don't recommend using a wet application on dry wall.
the only time you would want to do a wet app, is when you're installing on glass...and even then, it depends on the product
hi dont understand the bit about overlapping is it not like joining wallpaper patterns
he says to iverlap with the tool he is brushing. dont overlap the vinyl. so you go sideways pressing it to the wall the partially go over the same spot
Is this a wallpaper mural? Or does it actually have a 3D effect, like holographic feel that pops off the wall?
+Frankie Kung - It's a printed vinyl graphic. It's not 3D or holographic.
how do you go on if painters, tylers ,shopfitters, office workers..are in your way ....you have a nice clean empty space. .......it works the way it does on a video but not in real life
这种剪裁好了的壁布的安装其实相对简单啦，难的是一整卷就是一张的壁布。难点在于对胶的掌握。
Paint to cure 3 to 4 weeks..... Good luck with that. More so in a retail / POP build. Lucky if we can get these GC's to allow us a day let alone weeks! Toss in there issues surrounding the use and in some cases mandated use of the garbage low VOC paints and you have the makings for a great time.... (and gray hairs!)
Low and no VOC paints can certainly cause some headaches. We've found that adding a tint to the paint increases the success rate of applying vinyl to it. Not letting the paint properly cure can cause a whole range of issues. If you have customers who are really pushing you to not follow proper procedures, education is usually the best cure.
Brother I want to start business in India what I want to do and how how can I get your images who is help me from India
Will this work ok with a very lightly textured wall?
If you're not sure vinyl will adhere to the surface, it's always a good idea to do some tests. Feel free to call our tech support department at 888-672-2251. They can help you work through any issues.
MY MURALS WOULD PAINT A VANISHING POINT FROM YOUR TILE FLOOR STRUCTUREso as the person walked into the room the effect would be felt.. trees would bend on the ceiling but i would orchestrate any tall structures in the art to be ok if they did bend. Paint effects only go so far.
will it work on the glass? wet application?
Yes, you can apply this product to glass. However, because it has a water based adhesive you should not use a wet application method. Feel free to call our tech support team at 888-672-2251 if you need product recommendations.
Hi Guys! Do you sell these murals to Brazil?
+Ana Cristina Costa Thank you for your interest. We are a vinyl manufacturer and do not sell printed murals.
Hi Ana! ...I can help you with that, let me know... :)
What is the code name of that same material from this video ? spoke with supplier needs a code
It's printed on 3628 and laminated with 210 matte.
Super bonitos!!me encantan
Can u put one of these over a black and multi colored splatter painted wall
It really depends on how much texture there is on the wall. Please call our product support team at 888-672-2251. They can help you determine whether or not your wall is suitable for a vinyl graphic.
the sky is the limit Payton.... vinyl can even be installed on a brick wall Orafol Americas Inc... ;)
very nice...i wanna be take it my wall...bt hw much it price in squar feet?
If you're looking to purchase material, you can contact an authorized ORAFOL distributor found on our website. www.orafol.com/gp/americas/en/distributors/search-by-city
If you're looking to have a wall graphic created/installed, you'll need to find a local graphics installer.
If you live in Montreal... I'm your man for the job :) ...professional graphics installer here
I painted a way to make an underwater scene once by making a ship wreck your base there for bending wall effects would be forgiven because the wreck would still be in 2 illusion pieces to the mind would be ok to bend.
How much would something like that cost on my wall?
Hi Shaun,
You would need to find a local graphics provider for a quote. We're just the vinyl manufacturer.
roughly 1600 up to double
Hi Shaun... I can help you with that... what dimensions are we talking about?
What size is this wallpaper
Hello Jon, this was produced on 54" (1370mm) wide material and installed in vertical panels onto the wall.
will it work on a textured wall
We recommend applying to a flat surface without texture.
THIS IS A PROJECT I USED DREAM OF RUNNING iM A WALL MURALIST i CAME UP WITH A WAY TO RENDER TROM LOIEL MURALS INTO WALL PAPER CUSTOM FITTED TO YOUR HOME THAT REQUIRED A PROFESSIONAL WALL PAPER HANGER TO DO.. MISTAKES HERE MAKE YOU PAY FOR EXTRA COPIES SO HIRING A PROFESSIONAL IS A BETTER PLAN
How can I find this pic from where
Hossin, this is a picture of the main entrance of Wormsloe, Savannah, Georgia and then it was edited significantly to give the final effect.
nice. how much this type of wallpaper.
Hi Teja,
It's not wallpaper, it's printed vinyl. I would recommend contacting a sign shop or graphics company in your area if you're looking to have something like this created.
How much Price
u can provide service in gujrat pak
fantastic!!
very good.
Cost in indian rupees???????
Cool.
Very nice
I would imagine that if your wall or ceiling is not square you are entering a world of pain....
If you're working with an uneven ceiling it's recommended to add an about an inch of extra print top and bottom and trim it down after it's installed.
And install your 1st panel using a self leveling laser to guarantee your plumb and true.
as long as you have bleed all around the printed image, you're ok. Now if you dont notice that your wall isn't straight before you begine, now you're entering a world of pain... as I have before :) ...experience teaches you though
muy lindo donde consigo donde puedo hacer pedido del papel
Hola. Puede ordenar desde cualquiera de nuestros distribuidores. Encuentre uno en su área en nuestro sitio web aquí: www.orafol.com/gp/americas/en/distributors/search-by-city
😍
Good.
good
nice
रॉमधन
kerennnnnn
No. De do apna
nic
Doing it this way, if your roof line is not square and runs out the wrong way you are stuffed! amateur installer in my opinion! you need to bleed off and trim back!
We are fortunate to have a newly constructed building with straight ceilings and square corners, but you're correct. If you're working with an uneven ceiling, it's best to include some bleed and trim it down after installation.
Really..... Only an amateur would not utilize a self leveling laser. Sure you can afford one?
@@cbrr7615 i install prints all the time without a level and I do an awesome jobs.... mr cbr
Please get him a bigger squeegee
there's gotta be a better squeegee
The outlet covers look awful
Uncool
good