Yeah man. This really helped me install my new head unit on 2004 350z. Your right , DONT install the 8 wires from harness. Use the RCA so it's sends normal amps to BOSE system. It worked perfectly. Thank you so much. Ps . And yes you just have to wire your ground to make it all work. Props!!
So i wired up just like you said to my nissan altima. Yes its got an amp for the speakers. But i got a kenwood radio wired it correctly, sounds great but its really quite. I cant for the life of me figure out the problem.
Yes you’re running the sub. But did you look up the PAC ROEM-NIS2? It’s supposed to let you use an aftermarket stereo with an amp on your old stereo harness..
Did you have problems with volume? I did the exact same thing you did on my 2000 Maxima. I even bought the harness with the RCA's and I have to crank the audio all the way up.
If your max doesn’t have factory bose with an amp, then no need to use pre amp outputs on your head unit just use the amp output from the headunit straight to the speakers.
I have a 2017 Nissan Sentra it didn’t come with the Factory Bose audio system but I just bought one from a salvage Sentra. All the speakers fit perfectly just ran into an issue wiring it all up and was wondering if you would help
I have an 05 Altima and I’m putting just the aftermarket head unit, no amp. How and where would I connect the black ground wire, there’s no black coming from the factory wires or the harnesses
It was just very weird because I got music just real low but I didnt run a ground I just hooked black from harness to radio but if the factory amp wasent on I shouldn't have got any sound right?
Nope car has amp from factory. DO NOT Hook up to your high level speaker outputs or it will sound like shit, you must use the pre-amp out to go to the bose amp.
I have factory Bose and an aftermarket radio but the sound won’t play thru my bose. I have a scoshe nno4b harness but I was wondering if I needed anything else
Will the stereo turn on or just no sound? May have forgot to hook up the amp power as well as the headunit, remember you must wire the bose amp power with the headunit, then use the pre amp outputs, NOT high level outputs or it will distort as you're going from head unit to bose amp.
I’m having the same issues no sound at all from the factory Bose system do I need to get a pac for oem1 R-Roemnis2 do you think this would fix the issue???
You would wire the pac into your steering wheel controls. I didn't include this in the video as i'm installing an aftermarket steering wheel and will no longer have those controls.
Will this method work with a 2008 Nissan Altima. I have a factory bose stereo and I’m trying to install a JVC aftermarket stereo. Every time I touch ground to the chassis I hear a loud pop and static in the background
Hey bud I have the maxima and got the same exact harness u got I hooked everything up and I got music but very low even turned all the way up could it be because I didnt hook the amp turn on wire right and ground
Could be, although does your car have bose from factory? If not no need to use low level outputs. If you do have the amp make sure you have your amp power hooked up as well as grounds.
You don’t absolutely have to make your own ground. It is better and usually a cleaner signal if you do but not 100% required. If you wish to make your own ground simply attach a ground wire 10-12 awg preferable to any solid metal surface of the car. Make sure you sand down any paint and have a smooth clean connection to the wire from the metal structure.
Dont hook your 12v remote out to the 12v power on. Thats just dumb. Also your wiring is a fire hazard dude jesus take some price in your work. --- edit you had a car burn down holy shit whoda guessed it..
My 12v remote isnt to the power on? And hows my “wiring” a fire hazard? You rather i use crimps? Lmfao. And nope ive never had a car burn down over 30 cars under my belt so far
Make sure to drop a sub for more Altima videos and much more!
Cwc
whered you get the harnesses and stuff bro??
@@ss-vs7bs Just on amazon!
Yeah man. This really helped me install my new head unit on 2004 350z. Your right , DONT install the 8 wires from harness. Use the RCA so it's sends normal amps to BOSE system. It worked perfectly. Thank you so much. Ps . And yes you just have to wire your ground to make it all work. Props!!
Helped a lot with my 08 maxima, love the new videos too!
Thanks man! Got new videos coming at some point just been busy
This helped out alot for my 01 maxima. There's no detailed videos for the bose
I have a 02 maxima and it’s gle premium edition and mines way different! My harness doesn’t have any of that
Thanks brother works great 👏👏👌
Man you're smart as fuck lol i couldn't even get a single din in mine
Haha thanks man ive always liked electrical
So i wired up just like you said to my nissan altima. Yes its got an amp for the speakers. But i got a kenwood radio wired it correctly, sounds great but its really quite. I cant for the life of me figure out the problem.
Likely doesnt have bose audio. Check truck for amp, if you dont have one dont use pre amp outputs as theres no amp. Wire speakers to your head unit
That’s what a remote wire is for. Hook all 3 blue together and ground out the black to chassie. Done!
aye man i’m having an issue with where to wire my remotr output do i ground that aswell?
Yes you’re running the sub. But did you look up the PAC ROEM-NIS2? It’s supposed to let you use an aftermarket stereo with an amp on your old stereo harness..
No because i was using an android tablet.
This was super handy just need to get my bass/sub working I'm running 7.1 and this is 4 chan
Did you have problems with volume? I did the exact same thing you did on my 2000 Maxima. I even bought the harness with the RCA's and I have to crank the audio all the way up.
If your max doesn’t have factory bose with an amp, then no need to use pre amp outputs on your head unit just use the amp output from the headunit straight to the speakers.
Nvm my shit is on point after I solder my cables in I'm golden thanks for the vid I made the mistake and just twist the cables my bad
Glad to hear man!
So, you installed your own subwoofer and that's why you wired those extra RCA cables at the bottom?
Yes thats correct. The middle and top rca are front / rear pre amp outputs to the bose amp.
I have a 2017 Nissan Sentra it didn’t come with the Factory Bose audio system but I just bought one from a salvage Sentra. All the speakers fit perfectly just ran into an issue wiring it all up and was wondering if you would help
"Never had a car burn down" ----- UNTIL TODAY!
Still haven’t and ive owned over 30 cars.
Thanks for the video real helpful! What is that harness you bought to connect via rca
No worries and just got it on ebay, wiring harness with rca connections instead of just - + wires
Well I'd suggest looking online and getting the part number. My 04 was 70-7551
I have an 05 Altima and I’m putting just the aftermarket head unit, no amp. How and where would I connect the black ground wire, there’s no black coming from the factory wires or the harnesses
You ground it anywhere on ythe frame of your car. Black is always ground.
If i dont have the bose system i dont have to bypass it right?
Yup just wire to your stereo like a normal install
YOU ARE SO FUCKING SMART!!!!!!!!! THANK YOU THANK YOU THANK YOU!!!
Haha thanks man :) Glad i helped
It was just very weird because I got music just real low but I didnt run a ground I just hooked black from harness to radio but if the factory amp wasent on I shouldn't have got any sound right?
No you could still get sound
You don't need to get a bypass module or anything?
Nope car has amp from factory. DO NOT Hook up to your high level speaker outputs or it will sound like shit, you must use the pre-amp out to go to the bose amp.
The BackRoad Burnouts Thanks man! I'ma try doing like you did in my girl's 05 Altima SL it has Bose as well so I think it'll be the same as here.
What about the orange wire did you run it also with the red
Yes you do
Can any one tell me what's the positive and negative wires on the back speakers on a 2006 altima
The orange one is also connect to the red and the blue/white ?
Yup both orange and red and the blue/white all go to the red wire on your stereo!
When I did mine, there seems to be a power surge when I turn on the head unit.
hey man did you ever resolve this? i might be having the same thing
Literally having the same exact problem need help desperately
Thats odd
I have factory Bose and an aftermarket radio but the sound won’t play thru my bose. I have a scoshe nno4b harness but I was wondering if I needed anything else
Will the stereo turn on or just no sound? May have forgot to hook up the amp power as well as the headunit, remember you must wire the bose amp power with the headunit, then use the pre amp outputs, NOT high level outputs or it will distort as you're going from head unit to bose amp.
I’m having the same issues no sound at all from the factory Bose system do I need to get a pac for oem1 R-Roemnis2 do you think this would fix the issue???
Any news ?
How is the new radio holding up
I put a tablet in it then ended up trading it for a g35
It was a butch install i think the next owner took it out couldnt figure out how to use it
If I buy the harness for the steering wheel where do I connected at
You would wire the pac into your steering wheel controls. I didn't include this in the video as i'm installing an aftermarket steering wheel and will no longer have those controls.
We're do I buy the harness with the rca jacks
Amazon ebay etc
What hardness did you got.?
It was a metra harness
Where does the steering wheel harness connect to?
You need to wire your pac into the steering wheel harness.
Will this method work with a 2008 Nissan Altima. I have a factory bose stereo and I’m trying to install a JVC aftermarket stereo. Every time I touch ground to the chassis I hear a loud pop and static in the background
Josh Brien Probably not if thats the case haha, i’ve never owned an 08, but this will work for 05/06 Se/sl/ser any model with bose audio.
Did the exact same thing and fried my $700 radio
Is your grandpa joe biden?
😂
sounds canadian eh
You betcha
Hey bud I have the maxima and got the same exact harness u got I hooked everything up and I got music but very low even turned all the way up could it be because I didnt hook the amp turn on wire right and ground
Could be, although does your car have bose from factory? If not no need to use low level outputs. If you do have the amp make sure you have your amp power hooked up as well as grounds.
Me too
Does this work for a 2003?
Did you figure it out?
@@Jackie-oo2hv yeah, I got a soche connector harness. Works well.
Thanks for the reply!
How do I make my own ground?
You don’t absolutely have to make your own ground. It is better and usually a cleaner signal if you do but not 100% required. If you wish to make your own ground simply attach a ground wire 10-12 awg preferable to any solid metal surface of the car. Make sure you sand down any paint and have a smooth clean connection to the wire from the metal structure.
Straight to the dash is the best spot.
With bose audio you have to because you have to ground the amp. If you dont ground it you will get hissing and interference feedback constantly
Dont hook your 12v remote out to the 12v power on. Thats just dumb. Also your wiring is a fire hazard dude jesus take some price in your work. --- edit you had a car burn down holy shit whoda guessed it..
My 12v remote isnt to the power on? And hows my “wiring” a fire hazard? You rather i use crimps? Lmfao.
And nope ive never had a car burn down over 30 cars under my belt so far