Remove and Install Front Wheel - Stark VARG

How to change the Gear Oil on the Stark VARG 🐺⚡️
Official Technical Tutorial.
▶️ Removal Process.
Loosen fork clamp bolts on the left fork
Loosen wheel axle lock nut
Loosen fork clamp bolts on the right fork
Push the axle lock nut inside
Remove axle lock nut
Lift the front of the bike to support the rear wheel on the floor
Hold the wheel and remove the axle
Slide the wheel out between the forks
▶️ Assembly Process.
Slide the wheel between the forks
Ensure the brake disc slides between the brake pads
Wiggle the wheel and fork whilst pushing the axle inside
Gently bring down the front of the bike
Tighten axle lock nut
Tighten right fork clamp bolts
Tighten axle lock nut to 35 Nm
Loosen right fork clamp bolts
Spin the wheel a few times and squeeze the brake
Tighten all fork clamp bolts to 15 Nm
Check brake operation before operating the bike
#StarkVARG #TechnicalTutorial #EngineeredByRidersForRiders
Learn more and order your VARG here:
@
Observe your local health and safety guidelines. Ensure a safe working environment. Wear appropriate protective gear. Deviating from the prescribed order may result in injury or damage to the products.