Это видео недоступно.
Сожалеем об этом.
How to zero gap your Wahl clippers the easy way
HTML-код
- Опубликовано: 25 дек 2014
- To vote for Ricardo the barber to get a Barber Grammy please use the link below.
wshe.es/0GYr7UHh
To purchase these clippers click here.
www.amazon.com/gp/product/B000...
Zero gapping your clippers to give a closer haircut.Very easy to do just by following these simple directions. Enjoy
I thought zero gap was this entire complicated process, never knew it was such a simple task. Thanks man, great video.
Man! Man! Thanks for this video. I just got one of this as a gift and had no idea how to clean it and align it properly. You're the best.
Thank you. I just bought a clipper Wahl classic serie icon. Now I know how to make a zero gap
I have been doing hair for 14 years and just now heard of zero gapping. I already do this...lol....but didn't know this was called that. I LOVE the baby brush idea!!! Never thought of that! We use clippers brushed provided to us at my shop and they are so thick and wirey, I hate using them because I feel like they dull my blades! Thank you so much for this video! Much appreciated!
Thanks for sharing the video. I've just bought one Wahl Cordless Super Taper, and replaced the screws from an old clipper i had. It's really easy and simple but it works!!!
Thank you for this video. I just replaced the dead NiCd batteries in my old Remington by NiMH batteries. While it was all apart I cleaned the whole thing. Adjusting and oiling the blades made them cut like brand new.
Good info. My wife used my clippers on our huge 115lb fluffy dog. Dulled them to where they wouldn't cut. I was going to just buy some blades, but instead took the blades off, and laid some 400 grit sandpaper flat on a countertop. Laid the blades flat, and slid them up and down the paper about 20 times. I reassembled and oiled, and they just cut like new. A few minutes of work saved about $20. After that, I took one of my wife's fancy shoes, and played some fetch with the dog. :)
That's awesome spousal revenge 🤣
I need to see a video of this !
Hahah thanks for the giggles 🤭
I always wondered how barbers were always able to cut closer than any clippers I've ever purchased. The whole time it was something as simple as this.
Thanks for the video!!
Mark Robertson yea I bought some clips and it doesn’t come out how a barber does it
Persistence
LMMFAO! DUH!
I gave myself a haircut last night. I have had my Wahl clippers for a few years so I took them apart and cleaned them after my last use. I did ASSUME that the blades should be flush when I put it back together. It stung quite a bit when I was cleaning up the hair on my neck an I instantly realized that my assumption was wrong. Only minor nicks on my neck BUT it literally took enough skin off that I have a new tan line. Wish I would have seen this video BEFORE!
I already knew how to align and clean my clippers but I wanted to see you do it for fun and to see your way. Good video.
Pain in the backside when you can't get it back together. Your video helped me understand how it fits. Once you know and see how it fits it's rather easy.
Worked great! I use the wahl balding clipper. The curved blade was throwing me off but got it squared and zeroed
Really good video, I'm going to try this in the morning on my clippers. I can use these to "shave" my head. I find that a fake teeth brush work the best when cleaning your clippers. It has a small set of brushes on the back to reach all parts.
Thank you bro, you really know what your doing man. "I appreciate you".
I forgot to like this earlier. My clippers actually work now! Before I'd have to trim with scissors then touch up without any blade guards. After zero gapping it instantly took off chunks with the 3/8". Thank you so much!
Thanks For The Videos I'm A New Barber In School At The Moment And This Was Very Helpful. Just Subscribed 👍
i just bought a baby brush today and youre right works great thanks!
You should make videos more often they always are full of information and you're doing a perfect job
Thank you will do
i really appreciate fahm. Getting you live and direct from Africa. Thanki You
Good advise on the adjustment, but you could use some ZOOM IN to highlight the cap.
Great tutorial. Thanks man, exactly what I needed.
Sure seems like lot folks don't know about this. The difference between the two like us is we cut as well as maintenance are equipment. Here I am looking for a ol school sz set up when I am finding vids of maintaining equipment thx for this. Man
THEE BEST vid out there for changing out the blades! THANK YOU!!!! Your boredom? BONUS!!!
A soft bristle nylon paint brush from the dollar store works good too. Thanks for the great video.
Thanks for this, just got the closest shave my Wahl clippers have given sinec they were new, 20 odd yrs ago.
Ricardo, thank you! Nice vid, detailed, informative.
Hmmm, after years of personal use, I would say the most important #1 instruction is: One blade (The cutting blade) moves sideways and one blade is stationary. I call the large bottom blade (With the screws) the stationary blade. You must not allow the moving blade teeth to project beyond the stationary blade teeth or the moving blade will then cut your skin open and give you nasty surface sores--acting much like the teeth of a saw moving across a wood board. My biggest problem over time is--as said---when you tighten down one screw, this action causes the stationary blade to shift on the other side due to rotational forces caused by turning the screwdriver.
Thank you for making this video. So helpful
Once you got the blades snug with the big top blade facing you just lightly push the blades down at a 30-40° angle on a level surface like a counter top etc and tighten the screws. The top blade will ever so slightly overlap the bottom blade.
Best tip ever
@@amazinazian55555 thanks
Thanks I’ve just acquired a new (to me, only used once) Wahl set and the other instructional videos I watched before yours weren’t this informative. No owners manual included in mine. I appreciate your sharing this. Now let’s see about getting rid of this hornets nest uni-dread covid hairdo that got entirely outta control lol . Wish me luck folks 😊
Thanks!
lotsa people 'know' how to adjust clippers, but this video actually made it fast and easy.
So now I just do it myself, yup.
:]s
Extremely well information everything you talked about was interesting and educational thank you exarlant o gape.
Thanks for making this amazing tutorial Richardo! It helped me a lot trying to zero gap my Wahl Icon :D, and just started going through the Barber Game right now at 13. Keep up the good work man! Btw man can you please make a video Tutorial on how to do a Fauxhawk fade using Wahl Clippers? Thanks if you will :)
How is it now that you're 17, I hope fire if you still pursuing this career
great walkthrough !!
Thanks mate you really demonstrate professional
Thank you! I just bought my first clipper and I'm enjoying messing up my own hair lol
How are you at it now? Fire I hope.
Lmao practice makes perfect
Thanks! Great simple video!
you can use air duster can the stuff is for key boards .
VERY NICE EXPLANATION MAN. THANK YOU. BEST ONE SO FAR. Quick question by the way, do you use any cordless hair trimmer ? if so any preference and why ? thx again
Daum thanks man helped alot really man I appreciate the video 👍🏼👍🏼
I prefer the sterling reflections senior clipper. Also I would place some oil in the actual cutting blade a few times a day.
hola hermano te digo que te admiro mucho soy peluquero y aprendo mucho de tus videos mil gracias por ser tan generoso ojala entiendas español feliz año que DIOS te bendiga ati y familia
I used google translate lol. Thank you for watching and im glad to help out. Enjoy the new year.
Great video. Is there a way to remove minor rust spots from the blades?
should do a fast feeds and the masters zero-gap videos too bruh!! I need help with them both.
Hi Ricardo how about the detailer zero gaping, I waited for that, thx in advance.
thx bro help out alot 👍👌
i use rem oil works awesome
Two questions, does this (zero gap) reduce or eliminate sticking and patching on haircuts?
Which model Wahl clippers is that? It looks super high quality!
Wahls instructions manual booklet gives clear instructions on how to do a perfect alignment on the blades.
Top blade's 1st left teeth should be aligned with the bottom's first big teeth. The first top blade's Right teeth should be aligned with the bottoms side wall of the blade that's before the bottoms 1st Right teeth. The top (smaller moving) blade should be 1mm apart below from the bottom adjustable blade.
Thank you so much. Subbed !
Thank you .... for info and nice vdo.
Thank you for this, I never knew you could zero gap these clippers
does the left tooth of the cutting blade have to be in line with the top blade, so it has like a little gap to the left, and is uneven because the cutting blade is more to the right? Or just make it flush even on each side?
Thanks 👍🏿
what did you spray them with and that was oil you dropped in right
Una de las mejores de whal senior
Ricardo could you do a video of showing how the teeth should look after you do the zero gap ?? I'm new to this,Thank you, God bless
Exactly what I needed to know :)
Easy work first time trying
Thanks!
whats good ricardo, can I zero gap the cordless version of the seniors the same way?? I just ordered a slimline too with the blade adjuster, do they hit when u zero gap them? good look
Appreciate The Knowledge 🙏 Twas An Insightful Video Lol
Good video! Thanks!
Hey,i had a question ,i bought a Wahls recently and it doesn't work very well,Ive always had this brand and my last one would make you bald in 5 seconds and i loved it, when i bought this new one its like it wasn't even cutting,i was able to shave my head eventually but not very good, so i started playing with the blade settings and that didn't help but i also probably wasn't doing it right,i noticed when the arm was all the way down (closest cut) the blades weren't really moving?? then when i would move the arm upwards they would but of course you dont get a close cut that way, maybe it needs a whole bunch of oil? maybe it just needs breaking in? i remember when i bought the one before this one it was perfect out of the box, cutting fool for sure, any ideas? thank you much for your time and the video!!
Awesome video Ricardo very informative.. can you make a video doing/explaining the clipper over comb technique?.. the way you explain everything makes it very easy for one to approach a haircut. Let me know , thanks in advance.
Will put that on my list
thank you!!
Good day Sir, what kind of oil do you use in your clpper?
i got another question for you. i been noticing another problem on the masters i had 2 chrome masters an they felt smooth you couldnt feel a thing and i had 2 regular black masters not the limited ones but the regular black master i compare them with the chrome master an they are alittle bit loud i want to know what can i do to fix them
your beard looks fantastic...
Hey Ricardo...what are your thoughts on the Wahl legends...
Thanks
Good video, can I zero gap Wahl pro clip clippers?
Wow very good man!
Great video. Maybe a daft question, but I thought if you zero gapped the cutters by making the tips of the top and bottom blades be in line with each other, made the cutters nick and cut, or is this only the case if you use the clippers with no guard?
Thats actually pretty funny to see Wahl clippers which are made in my home village lmao
So after zero gapping, fully closed would be a 0 and fully open would be a 1/2?
Clear instructions, good close-ups! Thanks!
I don't have the Wahl brand of oil, so, I lubricate the 2 blades with a few drops of 'Johnsons baby oil'... it's a colourless 'light' mineral oil and it at least seems to do the job. One question, how do you align the blades 'from left to right...'
i need a full course.please help.
My ajuster leaver wont screw back on so when it all togever the screw is loose nd the bits fling off. Do i need a new screw due to oil maby rounding it off
Nice just 0 gapped the "Conair" 😎👌
You do not have to take the blade off to oil them.Just put a few daps on the back and sides of the blade then turn it on and move the arm up and down
Probably, the most important of the blade to be oiled, besides the teeth, would be between the blades to prevent friction between the front and back blades.
Your comment deserves a thumb down.
I suppose next you will be telling people not to place oil in their cars to oil their cars' engine bearings. - What do you tell them when the engine seizes up and stops working?
This is a great tutorial. I've just turned 70 and decided to buy a Wahl Elite Pro home kit. While waiting for it to arrive it's nice to study all this info.
Just a thought, isn't the fixed blade the one on the bottom and held in place by the screws, and the top blade the one that moves?
Okay - I think I got that wrong, I'm still learning.
Thank you helped a lot. New here
Can you do one zero gapping the oster fastfeeds please? Great videos btw!
I've been cutting my hair for awhile now, but want to go from a fade to a skin fade. I use my clippers from Walmart and a razor, but I can't get rid of the line between the razor and lowest setting. Would a Wahl Professional 5-Star Balding Clipper #8110 help get the line out or should I get an entirely new Wahl clipper set and just do the zero gap that you showed in this video?
Is there any way that you could replace the wahl elite pro with a 0.4 blade?
Dope video my guy
Is it a bad idea to zero gap the Wahl Magic Clip clippers? They have the fade blade with short and long teeth on the botton blade. I don't want to have any issues when cutting hair.
can you use gaurds with the fade blade?
im a home user
i dont need a chargebole machine
i am bold so all i have is very littel hair from the sides and from the back (cllasic bold)1
all i want is a machin that will cut my hair softly and will not stuck
what wahl model do you reccomend for me to buy ?
press the blade on a glass then tighten the screw it works you could angle the blade on the glass as well...
Surely these will break the skin if used for lining out?
Thanks Man,I’ve been shaving my Ass with one of these for years.I didn’t think I could get a close cut.
Andy T 😂
Lmao
🤣🤣🤣🤣 u wallin
Best videos
Hey man, did this with my Wahl Elite Pro's and the clippers are making all kinds of noise, and when I do get them a little lower (than what you've shown here) the blade stops moving. I've done this right as I've Zero Gapped my other few Wahl's, but wondering what I could do to stop this? I've returned the first set thinking it was just a weird issue, but now I know it isn't with the second pair as it's done the same thing.
Is it same brand as moser?
good video
good job bro. help it alot :)